This guide shows how to automate backups to a hard drive directly connected to your computer. If a backup hard drive is connected, backups are automatically started, and the drive shut-down and disconnected when they are done.
This guide is written for a Linux-based operating system and makes use of systemd and udev.
An udev rule is created to trigger on the addition of block devices. The rule contains a tag that triggers systemd to start a oneshot service. The oneshot service executes a script in the standard systemd service environment, which automatically captures stdout/stderr and logs it to the journal.
The script mounts the added block device, if it is a registered backup drive, and creates backups on it. When done, it optionally unmounts the file system and spins the drive down, so that it may be physically disconnected.
First, create the /etc/backups
directory (as root).
All configuration goes into this directory.
Then, create etc/backups/40-backup.rules
with the following content (all on one line):
ACTION=="add", SUBSYSTEM=="bdi", DEVPATH=="/devices/virtual/bdi/*",
TAG+="systemd", ENV{SYSTEMD_WANTS}="automatic-backup.service"
The “systemd” tag in conjunction with the SYSTEMD_WANTS environment variable has systemd
launch the “automatic-backup” service, which we will create next, as the
/etc/backups/automatic-backup.service
file:
[Service]
Type=oneshot
ExecStart=/etc/backups/run.sh
Now, create the main backup script, /etc/backups/run.sh
. Below is a template,
modify it to suit your needs (e.g. more backup sets, dumping databases etc.).
#!/bin/bash -ue
# The udev rule is not terribly accurate and may trigger our service before
# the kernel has finished probing partitions. Sleep for a bit to ensure
# the kernel is done.
#
# This can be avoided by using a more precise udev rule, e.g. matching
# a specific hardware path and partition.
sleep 5
#
# Script configuration
#
# The backup partition is mounted there
MOUNTPOINT=/mnt/backup
# This is the location of the Borg repository
TARGET=$MOUNTPOINT/borg-backups/backup.borg
# Archive name schema
DATE=$(date --iso-8601)-$(hostname)
# This is the file that will later contain UUIDs of registered backup drives
DISKS=/etc/backups/backup.disks
# Find whether the connected block device is a backup drive
for uuid in $(lsblk --noheadings --list --output uuid)
do
if grep --quiet --fixed-strings $uuid $DISKS; then
break
fi
uuid=
done
if [ ! $uuid ]; then
echo "No backup disk found, exiting"
exit 0
fi
echo "Disk $uuid is a backup disk"
partition_path=/dev/disk/by-uuid/$uuid
# Mount file system if not already done. This assumes that if something is already
# mounted at $MOUNTPOINT, it is the backup drive. It won't find the drive if
# it was mounted somewhere else.
(mount | grep $MOUNTPOINT) || mount $partition_path $MOUNTPOINT
drive=$(lsblk --inverse --noheadings --list --paths --output name $partition_path | head --lines 1)
echo "Drive path: $drive"
#
# Create backups
#
# Options for borg create
BORG_OPTS="--stats --one-file-system --compression lz4 --checkpoint-interval 86400"
# Set BORG_PASSPHRASE or BORG_PASSCOMMAND somewhere around here, using export,
# if encryption is used.
# No one can answer if Borg asks these questions, it is better to just fail quickly
# instead of hanging.
export BORG_RELOCATED_REPO_ACCESS_IS_OK=no
export BORG_UNKNOWN_UNENCRYPTED_REPO_ACCESS_IS_OK=no
# Log Borg version
borg --version
echo "Starting backup for $DATE"
# This is just an example, change it however you see fit
borg create $BORG_OPTS \
--exclude /root/.cache \
--exclude /var/lib/docker/devicemapper \
$TARGET::$DATE-$$-system \
/ /boot
# /home is often a separate partition / file system.
# Even if it isn't (add --exclude /home above), it probably makes sense
# to have /home in a separate archive.
borg create $BORG_OPTS \
--exclude 'sh:/home/*/.cache' \
$TARGET::$DATE-$$-home \
/home/
echo "Completed backup for $DATE"
# Just to be completely paranoid
sync
if [ -f /etc/backups/autoeject ]; then
umount $MOUNTPOINT
hdparm -Y $drive
fi
if [ -f /etc/backups/backup-suspend ]; then
systemctl suspend
fi
Create the /etc/backups/autoeject
file to have the script automatically eject the drive
after creating the backup. Rename the file to something else (e.g. /etc/backup/autoeject-no
)
when you want to do something with the drive after creating backups (e.g running check).
Create the /etc/backups/backup-suspend
file if the machine should suspend after completing
the backup. Don’t forget to physically disconnect the device before resuming,
otherwise you’ll enter a cycle. You can also add an option to power down instead.
Create an empty /etc/backups/backup.disks
file, you’ll register your backup drives
there.
The last part is to actually enable the udev rules and services:
ln -s /etc/backups/40-backup.rules /etc/udev/rules.d/40-backup.rules
ln -s /etc/backups/automatic-backup.service /etc/systemd/system/automatic-backup.service
systemctl daemon-reload
udevadm control --reload
Connect your backup hard drive. Format it, if not done already. Find the UUID of the file system that backups should be stored on:
lsblk -o+uuid,label
Note the UUID into the /etc/backup/backup.disks
file.
Mount the drive to /mnt/backup.
Initialize a Borg repository at the location indicated by TARGET
:
borg init --encryption ... /mnt/backup/borg-backups/backup.borg
Unmount and reconnect the drive, or manually start the automatic-backup
service
to start the first backup:
systemctl start --no-block automatic-backup
See backup logs using journalctl:
journalctl -fu automatic-backup [-n number-of-lines]
The script as shown above will mount any file system with an UUID listed in
/etc/backup/backup.disks
. The UUID check is a safety / annoyance-reduction
mechanism to keep the script from blowing up whenever a random USB thumb drive is connected.
It is not meant as a security mechanism. Mounting file systems and reading repository
data exposes additional attack surfaces (kernel file system drivers,
possibly user space services and Borg itself). On the other hand, someone
standing right next to your computer can attempt a lot of attacks, most of which
are easier to do than e.g. exploiting file systems (installing a physical key logger,
DMA attacks, stealing the machine, …).
Borg ensures that backups are not created on random drives that “just happen” to contain a Borg repository. If an unknown unencrypted repository is encountered, then the script aborts (BORG_UNKNOWN_UNENCRYPTED_REPO_ACCESS_IS_OK=no).
Backups are only created on hard drives that contain a Borg repository that is either known (by ID) to your machine or you are using encryption and the passphrase of the repository has to match the passphrase supplied to Borg.