DDEV Installation¶

macOS¶

Homebrew¶

Homebrew is the easiest and most reliable way to install and upgrade DDEV:

# Install DDEV
brew install ddev/ddev/ddev

# Initialize mkcert
mkcert -install

Install Script¶

The install script is another option. It downloads, verifies, and sets up the ddev binary:

# Download and run the install script
curl -fsSL https://ddev.com/install.sh | bash

# Download and run the script to install DDEV v1.21.4
curl -fsSL https://ddev.com/install.sh | bash -s v1.21.4

Linux¶

Locally-trusted certificate with mkcert¶

Modern browsers require valid certificates, which mkcert can create. Install mkcert, and then run this:

# Initialize mkcert
mkcert -install

Some versions of Firefox (Developer Edition, Flatpak) may need some extra work, see also this issue.

Debian/Ubuntu¶

DDEV’s Debian and RPM packages work with apt and yum repositories and most variants that use them, including Windows WSL2:

# Add DDEV’s GPG key to your keyring
sudo sh -c 'echo ""'
sudo install -m 0755 -d /etc/apt/keyrings
curl -fsSL https://pkg.ddev.com/apt/gpg.key | gpg --dearmor | sudo tee /etc/apt/keyrings/ddev.gpg > /dev/null
sudo chmod a+r /etc/apt/keyrings/ddev.gpg

# Add DDEV releases to your package repository
sudo sh -c 'echo ""'
echo "deb [signed-by=/etc/apt/keyrings/ddev.gpg] https://pkg.ddev.com/apt/ * *" | sudo tee /etc/apt/sources.list.d/ddev.list >/dev/null

# Update package information and install DDEV
sudo sh -c 'echo ""'
sudo apt update && sudo apt install -y ddev

sudo rm -f /usr/local/bin/ddev /usr/local/bin/mkcert /usr/local/bin/*ddev_nfs_setup.sh

Fedora, Red Hat, etc.¶

# Add DDEV releases to your package repository
sudo sh -c 'echo ""'
echo '[ddev]
name=ddev
baseurl=https://pkg.ddev.com/yum/
gpgcheck=0
enabled=1' | perl -p -e 's/^ +//' | sudo tee /etc/yum.repos.d/ddev.repo >/dev/null

# Install DDEV
sudo sh -c 'echo ""'
sudo dnf install --refresh ddev

Signed yum repository support will be added in the future.

Arch Linux¶

We maintain the ddev-bin package in AUR for Arch-based systems including Arch Linux, EndeavourOS and Manjaro. Install with yay or your AUR tool of choice.

# Install DDEV
yay -S ddev-bin

Homebrew (AMD64 only)¶

# Install DDEV using Homebrew
brew install ddev/ddev/ddev

Install Script¶

The install script is another option. It downloads, verifies, and sets up the ddev binary:

# Download and run the install script
curl -fsSL https://ddev.com/install.sh | bash

# Download and run the script to install DDEV v1.21.4
curl -fsSL https://ddev.com/install.sh | bash -s v1.21.4

Windows¶

You can install DDEV on Windows three ways:

1. Using WSL2 with Docker inside
2. Using WSL2 with Docker Desktop
3. Installing directly on traditional Windows with an installer

We strongly recommend using WSL2. While its Linux experience may be new for some Windows users, it’s worth the performance benefit and common experience of working with Ubuntu and Bash.

Important Considerations for WSL2 and DDEV¶

• You must use WSL2, not WSL version 1. Use wsl.exe -l -v to see the versions of the distros you are using they should be v2.
• WSL2 is supported on Windows 10 and 11. All Windows 10/11 editions, including Windows 10 Home support WSL2.

• WSL2 offers a faster, smoother experience.
  It’s vastly more performant, and you’re less likely to have obscure Windows problems.

• Execute DDEV commands inside WSL2.
  You’ll want to run DDEV commands inside Ubuntu, for example, and never on the Windows side in PowerShell or Git Bash.

• Projects should live in the Linux filesystem.
  WSL2’s Linux filesystem (e.g. /home/<your_username>) is much faster, so keep your projects there and not in the slower Windows filesystem (/mnt/c).
• Custom hostnames are managed via the Windows hosts file, not within WSL2.
  DDEV attempts to manage custom hostnames via the Windows-side hosts file—usually at C:\Windows\system32\drivers\etc\hosts—and it can only do this if it’s installed on the Windows side. (DDEV inside WSL2 uses ddev.exe on the Windows side as a proxy to update the Windows hosts file.) If ddev.exe --version shows the same version as ddev --version you’re all set up. Otherwise, install DDEV on Windows using choco upgrade -y ddev or by downloading and running the Windows installer. (The WSL2 scripts below install DDEV on the Windows side, taking care of that for you.) If you frequently run into Windows UAC Escalation, you can calm it down by running gsudo.exe cache on and gsudo.exe config CacheMode auto, see gsudo docs.
• WSL2 is not the same as Docker Desktop’s WSL2 engine.
  Using WSL2 to install and run DDEV is not the same as using Docker Desktop’s WSL2 engine, which itself runs in WSL2, but can serve applications running in both traditional Windows and inside WSL2.

The WSL2 install process involves:

• Installing Chocolatey package manager (optional).
• One time initialization of mkcert.
• Installing WSL2 and installing a distro like Ubuntu.
• Optionally installing Docker Desktop for Windows and enabling WSL2 integration with the distro (if you’re using the Docker Desktop approach).
• Installing DDEV inside your distro; this is normally done by running one of the two scripts below, but can be done manually step-by-step as well.
• Verify that your distro uses WSL version 2 with wsl.exe -l -v.

WSL2 + Docker CE Inside Install Script¶

This prepares your default WSL2 Ubuntu distro and doesn’t require Docker Desktop, and you can run the script multiple times without breaking anything.

In all cases:

1. Install WSL2 with an Ubuntu distro.

   • Install WSL:

     wsl --install
     

   • Reboot if required. (Usually required.)

   • Verify that you have an Ubuntu distro set as default by running wsl.exe -l -v.
     If you have WSL2 but not an Ubuntu distro, install one by running wsl.exe --install Ubuntu. If this doesn’t work, see manual installation and troubleshooting.

   • Verify that your Ubuntu default distro is WSL v2 using wsl -l -v.

2. In an administrative PowerShell run this PowerShell script by executing:

   Set-ExecutionPolicy Bypass -Scope Process -Force; [System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072;
   iex ((New-Object System.Net.WebClient).DownloadString('https://raw.githubusercontent.com/ddev/ddev/master/scripts/install_ddev_wsl2_docker_inside.ps1'))
   

3. In Windows Update Settings → Advanced Options enable Receive updates for other Microsoft products. You may want to occasionally run wsl.exe --update as well.

Now you can use the “Ubuntu” terminal app or Windows Terminal to access your Ubuntu distro, which has DDEV and Docker working inside it.

WSL2 + Docker Desktop Install Script¶

This prepares your default WSL2 Ubuntu distro for use with Docker Desktop, and you can run the script multiple times without breaking anything.

In all cases:

1. Install WSL2 with an Ubuntu distro. On a system without WSL2, run:

   wsl --install
   

   • Verify that you have an Ubuntu distro set as the default default with wsl -l -v.

   • If you have WSL2 but not an Ubuntu distro, install one with wsl --install Ubuntu.
     If that doesn’t work for you, see manual installation and troubleshooting.

   If you prefer to use another Ubuntu distro, install it and set it as default. For example, wsl --set-default Ubuntu-22.04.

2. In Windows Update Settings → Advanced Options enable Receive updates for other Microsoft products. You may want to occasionally run wsl.exe --update as well.

3. Install Docker Desktop. If you already have Chocolatey, run choco install -y docker-desktop. Otherwise download Docker Desktop from Docker.

4. Start Docker Desktop. You should now be able to run docker ps in PowerShell or Git Bash.
5. In Docker Desktop → Settings → Resources → WSL2 Integration, verify that Docker Desktop is integrated with your distro.

6. In an administrative PowerShell run this PowerShell script by executing:

   Set-ExecutionPolicy Bypass -Scope Process -Force; [System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072;
   iex ((New-Object System.Net.WebClient).DownloadString('https://raw.githubusercontent.com/ddev/ddev/master/scripts/install_ddev_wsl2_docker_desktop.ps1'))
   

7. In Windows Update Settings → Advanced Options enable Receive updates for other Microsoft products. You may want to occasionally run wsl.exe --update as well.

Now you can use the “Ubuntu” terminal app or Windows Terminal to access your Ubuntu distro, which has DDEV and Docker Desktop integrated with it.

WSL2/Docker Desktop Manual Installation¶

You can manually step through the process the install script attempts to automate:

1. Install Chocolatey:

   Set-ExecutionPolicy Bypass -Scope Process -Force; [System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072;
   iex ((New-Object System.Net.WebClient).DownloadString('https://chocolatey.org/install.ps1'))`
   

2. In an administrative PowerShell, run choco install -y ddev mkcert.
3. In an administrative PowerShell, run mkcert -install and follow the prompt to install the Certificate Authority.
4. In an administrative PowerShell, run $env:CAROOT="$(mkcert -CAROOT)"; setx CAROOT $env:CAROOT; If ($Env:WSLENV -notlike "*CAROOT/up:*") { $env:WSLENV="CAROOT/up:$env:WSLENV"; setx WSLENV $Env:WSLENV }. This will set WSL2 to use the Certificate Authority installed on the Windows side. In some cases it takes a reboot to work correctly.
5. In administrative PowerShell, run wsl --install. This will install WSL2 and Ubuntu for you. Reboot when this is done.
6. Docker Desktop for Windows: If you already have the latest Docker Desktop, configure it in the General Settings to use the WSL2-based engine. Otherwise install the latest Docker Desktop for Windows and select the WSL2-based engine (not legacy Hyper-V) when installing. Install with Chocolatey by running choco install docker-desktop, or download the installer from desktop.docker.com. Start Docker. It may prompt you to log out and log in again, or reboot.
7. Go to Docker Desktop’s Settings → Resources → WSL integration → enable integration for your distro. Now docker commands will be available from within your WSL2 distro.
8. Double-check in PowerShell: wsl -l -v should show three distros, and your Ubuntu should be the default. All three should be WSL version 2.
9. Double-check in Ubuntu (or your distro): echo $CAROOT should show something like /mnt/c/Users/<you>/AppData/Local/mkcert
10. Check that Docker is working inside Ubuntu (or your distro) by running docker ps.
11. Open the WSL2 terminal, for example Ubuntu from the Windows start menu.

12. Install DDEV:

    sudo install -m 0755 -d /etc/apt/keyrings
    curl -fsSL https://pkg.ddev.com/apt/gpg.key | gpg --dearmor | sudo tee /etc/apt/keyrings/ddev.gpg > /dev/null
    echo "deb [signed-by=/etc/apt/keyrings/ddev.gpg] https://pkg.ddev.com/apt/ * *" | sudo tee /etc/apt/sources.list.d/ddev.list >/dev/null
    sudo apt update && sudo apt install -y ddev
    

13. In WSL2, run mkcert -install.

You have now installed DDEV on WSL2. If you’re using WSL2 for DDEV, remember to run all ddev commands inside the WSL2 distro.

Traditional Windows¶

If you must use traditional Windows without WSL2, you’ll probably want to enable Mutagen for the best performance.

• We recommend using Chocolatey. Once installed, you can run choco install ddev docker-desktop git from an administrative shell. You can upgrade by running ddev poweroff && choco upgrade ddev.
• Each DDEV release includes a Windows installer (ddev_windows_installer.<version>.exe). After running that, you can open a new Git Bash, PowerShell, or cmd.exe window and start using DDEV.

Most people interact with DDEV on Windows using Git Bash, part of the Windows Git suite. Although DDEV does work with cmd.exe and PowerShell, it’s more at home in Bash. You can install Git Bash with Chocolatey by running choco install -y git.

Gitpod¶

Choose any of the following methods to launch your project with Gitpod:

1. Open any repository using Gitpod and run the following:

   # Add DDEV’s GPG key to your keyring
   curl -fsSL https://pkg.ddev.com/apt/gpg.key | gpg --dearmor | sudo tee /etc/apt/keyrings/ddev.gpg > /dev/null
   
   # Add DDEV releases to your package repository
   echo "deb [signed-by=/etc/apt/keyrings/ddev.gpg] https://pkg.ddev.com/apt/ * *" | sudo tee /etc/apt/sources.list.d/ddev.list >/dev/null
   
   
   # Update package information and install DDEV
   sudo apt update && sudo apt install -y ddev
   

   • You can install your web app there, or import a database.
   • You may want to implement one of the ddev pull provider integrations to pull from a hosting provider or an upstream source.

2. Use the ddev-gitpod-launcher form to launch a repository. You’ll provide a source repository and click a button to open a newly-established environment. You can specify a companion artifacts repository and automatically load db.sql.gz and files.tgz from it. (More details in the repository’s README.)

3. Save the following link to your bookmark bar: Open in ddev-gitpod. It’s easiest to drag the link into your bookmarks. When you’re on a Git repository, click the bookmark to open it with DDEV in Gitpod. It does the same thing as the second option, but it works on non-Chrome browsers and you can use native browser keyboard shortcuts.

It can be complicated to get private databases and files into Gitpod, so in addition to the launchers, the git provider example demonstrates pulling a database and files without complex setup or permissions. This was created explicitly for Gitpod integration, because in Gitpod you typically already have access to private Git repositories, which are a fine place to put a starter database and files. Although ddev-gitpod-launcher and the web extension provide the capability, you may want to integrate a Git provider—or one of the other providers—for each project.

GitHub Codespaces¶

You can use DDEV in remote GitHub Codespaces without having to run Docker locally; you only need a browser and an internet connection.

Start by creating a .devcontainer/devcontainer.json file in your GitHub repository:

{
  "image": "mcr.microsoft.com/devcontainers/universal:2",
  "features": {
    "ghcr.io/ddev/ddev/install-ddev:latest": {}
  },
}

Launch your repository in Codespaces:

DDEV is now available within your new codespace instance:

Run ddev config to start a new blank project - or install a CMS.

Run ddev start if there is already a configured DDEV project in your repository.

Troubleshooting:

If there are errors after restarting a codespace, use ddev restart or ddev poweroff.

You can also use the commands

• “Codespaces: Rebuild container”
• “Codespaces: Full rebuild container” (Beware: database will be deleted)

via the Visual Studio Code Command Palette:

• ⌘ + SHIFT + P on a Mac
• CTRL + SHIFT + P on Windows/Linux
• from the Application Menu, click View > Command Palette (Firefox)

If you need DDEV-specific assistance or have further questions, see support.

Your updated devcontainer.json file may differ depending on your project, but you should have install-ddev in the features section.

Docker integration¶

DDEV in Codespaces relies on docker-in-docker, which is installed by default when you use the image "mcr.microsoft.com/devcontainers/universal:2". Please be aware: GitHub Codespaces and its Docker-integration (docker-in-docker) are relatively new. See devcontainers/features for general support and issues regarding Docker-support.

DDEV’s router is not used¶

Since Codespaces handles all the routing, the internal DDEV router will not be used on Codespaces. Therefore config settings like web_extra_exposed_ports will have no effect.

You can expose ports via the ports setting, which is usually not recommended if you work locally due to port conflicts. But you can load these additional Docker compose files only when Codespaces is detected. See Defining Additional Services for more information.

services:
    web:
        ports:
        - "5174:5174"

Default environment variables¶

Codespace instances already provide some default environment values. You can inherit and inject them in your .ddev/config.yaml:

web_environment: 
    - CODESPACES
    - CODESPACE_NAME
    - GITHUB_CODESPACES_PORT_FORWARDING_DOMAIN

Advanced usage via devcontainer.json¶

A lot more customization is possible via the devcontainer.json-configuration. You can install Visual Studio Code extensions by default or run commands automatically.

postCreateCommand¶

The postCreateCommand lets you run commands automatically when a new codespace is launched. DDEV commands are available here.

The event is triggered on: fresh creation, rebuilds and full rebuilds. ddev poweroff is used in this example to avoid errors on rebuilds since some Docker containers are kept.

You usually want to use a separate bash script to do this, as docker might not yet be available when the command starts to run.

{
    "image": "mcr.microsoft.com/devcontainers/universal:2",
    "features": {
        "ghcr.io/ddev/ddev/install-ddev:latest": {}
    },
    "portsAttributes": {
        "3306": {
            "label": "database"
        },
        "8027": {
            "label": "mailpit"
        },
        "8080": {
            "label": "web http"
        },
        "8443": {
            "label": "web https"
        }
    },
    "postCreateCommand": "chmod +x .devcontainer/setup_project.sh && .devcontainer/setup_project.sh"
}

#!/bin/bash
set -ex

wait_for_docker() {
  while true; do
    docker ps > /dev/null 2>&1 && break
    sleep 1
  done
  echo "Docker is ready."
}

wait_for_docker

# download images beforehand, optional
ddev debug download-images

# avoid errors on rebuilds
ddev poweroff

# start ddev project automatically
ddev start -y

# further automated install / setup steps, e.g. 
ddev composer install 

To check for errors during the postCreateCommand action, use the command

• “Codespaces: View creation log”

via the Visual Studio Code Command Palette:

• ⌘ + SHIFT + P on a Mac
• CTRL + SHIFT + P on Windows/Linux
• from the Application Menu, click View > Command Palette (Firefox)

Manual¶

DDEV is a single executable, so installation on any OS is a matter of copying the ddev binary for your architecture into the appropriate system path on your machine.

• Download and extract the latest DDEV release for your architecture.
• Move ddev to /usr/local/bin with mv ddev /usr/local/bin/ (may require sudo), or another directory in your $PATH as preferred.
• Run ddev to test your installation. You should see DDEV’s command usage output.

• As a one-time initialization, run mkcert -install, which may require your sudo password.

  If you don’t have mkcert installed, download the latest release for your architecture and sudo mv <downloaded_file> /usr/local/bin/mkcert && sudo chmod +x /usr/local/bin/mkcert.