Troubleshooting¶

Things might go wrong! In addition to this page, consider checking Stack Overflow and the DDEV issue queue and other support options, as well as Docker troubleshooting suggestions.

General Troubleshooting Strategies¶

• Start by running ddev poweroff to make sure all containers can start fresh.
• Please use the current stable version of DDEV and of your Docker provider before going too far or asking for support.
• Temporarily disable firewalls, VPNs, tunnels, network proxies, and virus checkers while you’re troubleshooting.
• Temporarily disable any proxies you’ve established in Docker’s settings.
• Check to see if you’re out of disk space. On macOS, make sure that your Docker provider has adequate disk space allocated. (DDEV will normally warn you about problems in this situation.)
• On macOS, if you have a particular heavyweight project or are encountering kill statements in ddev logs, increase your memory allocation in your Docker provider. (Most projects are fine with 5-6GB allocated.)
• Please make sure that your project is in a subdirectory of your home directory and has normal ownership and privileges. For example, ls -ld . in your project directory should show you as owner of the directory and with write privileges.
• Use ddev debug dockercheck and ddev debug test to help sort out Docker problems.
• Make sure you do not have disk space problems on your computer. This can be especially tricky on WSL2, where you need to check both the main Windows disk space and WSL2 disk space as well.
• On macOS, check to make sure Docker Desktop or Colima are not out of disk space. In Settings (or Preferences) → Resources → Disk image size there should be ample space left; try not to let usage exceed 80% because the reported number can be unreliable. If it says zero used, something is wrong.
• If you have customizations like PHP overrides, nginx or Apache overrides, MySQL/PostgreSQL overrides, custom services, or config.yaml changes, please back them out while troubleshooting. It’s important to have the simplest possible environment while troubleshooting.
• Restart Docker. Consider a Docker factory reset in serious cases, which will destroy any databases you’ve loaded. See Docker Troubleshooting for more.

• Try the simplest possible DDEV project (like ddev debug test does):

  ddev poweroff
  mkdir ~/tmp/testddev
  cd ~/tmp/testddev
  ddev config --auto
  printf "<?php\nphpinfo();\n" > index.php
  ddev start
  

  If that starts up fine, there may be an issue specifically with the project you’re trying to start.

Debug Environment Variables¶

Two environment variables meant for DDEV development may also be useful for broader troubleshooting: DDEV_DEBUG and DDEV_VERBOSE. When enabled, they’ll output more information when DDEV is executing a command. DDEV_VERBOSE can be particularly helpful debugging Dockerfile problems because it outputs complete information about the Dockerfile build stage within the ddev start command.

You can set either one in your current session by running export DDEV_DEBUG=true and export DDEV_VERBOSE=true.

Web Server Ports Already Occupied¶

DDEV may notify you about port conflicts with this message about port 80 or 443:

Failed to start yoursite: Unable to listen on required ports, localhost port 80 is in use

DDEV sometimes also has this error message that will alert you to port conflicts:

ERROR: for ddev-router Cannot start service ddev-router: Ports are not available: listen tcp 127.0.0.1:XX: bind: An attempt was made to access a socket in a way forbidden by its access permissions.

or

Error response from daemon: Ports are not available: exposing port TCP 127.0.0.1:443 -> 0.0.0.0:0: listen tcp 127.0.0.1:443: bind: Only one usage of each socket address (protocol/network address/port) is normally permitted.

This means there’s another process or web server listening on the named port(s) and DDEV cannot access the port. The most common conflicts are on ports 80 and 443.

In some cases, the conflict could be over Mailpit’s port 8025 or 8026.

To resolve this conflict, choose one of these methods:

1. Stop all Docker containers that might be using the port by running ddev poweroff && docker rm -f $(docker ps -aq), then restart Docker.
2. If you’re using another local development environment that uses these ports (MAMP, WAMP, Lando, etc.), consider stopping it.
3. Fix port conflicts by configuring DDEV globally to use different ports.
4. Fix port conflicts by stopping the competing application.

Method 1: Stop the conflicting application¶

Consider lando poweroff for Lando, or fin system stop for Docksal, or stop MAMP using GUI interface or stop.sh.

Method 2: Fix port conflicts by configuring your project to use different ports¶

To configure a project to use non-conflicting ports, remove router port configuration from the project and set it globally to different values. This will work for most people:

ddev config --router-http-port="" --router-https-port=""
ddev config global --router-http-port=8080 --router-https-port=8443
ddev start

This changes the project’s HTTP URL to http://yoursite.ddev.site:8080 and the HTTPS URL to https://yoursite.ddev.site:8443.

If the conflict is over port 8025 or 8026, it’s probably clashing with Mailpit’s default port:

ddev config --mailpit-http-port="" --mailpit-https-port=""
ddev config global --mailpit-http-port=8301 --mailpit-https-port=8302

Method 3: Fix port conflicts by stopping the competing application¶

Alternatively, stop the other application.

Probably the most common conflicting application is Apache running locally. It can often be stopped gracefully (but temporarily) with:

sudo apachectl stop

Common tools that use port 80 and port 443:

Here are some of the other common processes that could be using ports 80/443 and methods to stop them.

• macOS content filtering: Under “Screen Time” → “Choose Screen Time content and privacy settings”, turn off “Content and Privacy” and then reboot. This has been a common issue with macOS Sonoma.
• macOS or Linux Homebrew: Look for active processes by running brew services and temporarily running brew services stop individually to see if it has any impact on the conflict.
• MAMP (macOS): Stop MAMP.
• Apache: Temporarily stop with sudo apachectl stop, permanent stop depends on your environment.
• nginx (macOS Homebrew): sudo brew services stop nginx or sudo launchctl stop homebrew.mxcl.nginx.
• nginx (Ubuntu): sudo service nginx stop.
• Apache (many environments, often named “httpd”): sudo apachectl stop or on Ubuntu sudo service apache2 stop.
• VPNKit (macOS): You likely have a Docker container bound to port 80. Do you have containers up for Lando or another Docker-based development environment? If so, stop the other environment.
• Lando: If you’ve previously used Lando, try running lando poweroff.
• IIS on Windows (can affect WSL2). You’ll have to disable it in the Windows settings.

To dig deeper, you can use a number of tools to find out what process is listening.

On macOS and Linux, try the lsof tool on ports 80 or 443 or whatever port you’re having trouble with:

$ sudo lsof -i :443 -sTCP:LISTEN
COMMAND  PID     USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
nginx   1608 www-data   46u  IPv4  13913      0t0  TCP *:http (LISTEN)
nginx   5234     root   46u  IPv4  13913      0t0  TCP *:http (LISTEN)

You can also use the netstat -anv -p tcp command to examine processes running on specific ports:

sudo netstat -anv -p tcp | egrep 'Proto|(\*\.(80|443))'
Proto Recv-Q Send-Q  Local Address          Foreign Address        (state)      rhiwat  shiwat    pid   epid state  options           gencnt    flags   flags1 usscnt rtncnt fltrs
tcp4       0      0  *.80                   *.*                    LISTEN       131072  131072  10521      0 00100 00000006 000000000000965d 00000000 00000900      1      0 000001
tcp4       0      0  *.443                  *.*                    LISTEN       131072  131072  10521      0 00100 00000006 000000000000965c 00000000 00000900      1      0 000001```

The pid column shows the process ID of the process listening on the port. In this case, it’s 10521. You can use ps to find out what process that is:

$ ps -p 10521
$ ps -fp 10521
UID   PID  PPID   C STIME   TTY           TIME CMD
501 10521     1   0 12:35PM ??         0:05.16 /Applications/OrbStack.app/Contents/MacOS/../Frameworks/OrbStack Helper.app/Contents/MacOS/OrbStack Helper vmgr -build-id 339077377 -handoff

On Windows CMD, use sysinternals tcpview or try using netstat and tasklist to find the process ID:

> netstat -aon | findstr ":80.*LISTENING"
  TCP    127.0.0.1:80           0.0.0.0:0              LISTENING       5760
  TCP    127.0.0.1:8025         0.0.0.0:0              LISTENING       5760
  TCP    127.0.0.1:8036         0.0.0.0:0              LISTENING       5760

> tasklist | findstr "5760"
com.docker.backend.exe        5760 Services                   0      9,536 K

The resulting output displays which command is running and its PID. Choose the appropriate method to stop the other server.

You may also be able to find what’s using a port using curl. On Linux, macOS, or in Git Bash on Windows, curl -I localhost or curl -I -k https://localhost:443. The result may give you a hint about which application is at fault.

We welcome your suggestions based on other issues you’ve run into and your troubleshooting technique.

Debugging Port Issues on WSL2¶

On WSL2 it’s harder to debug this because the port may be occupied either on the traditional Windows side, or within your WSL2 distro. This means you may have to debug it in both places, perhaps using both the Windows techniques shown above and the Linux techniques shown above. The ports are shared between Windows and WSL2, so they can be broken on either side.

Database Container Fails to Start¶

Use ddev logs -s db to see what’s wrong.

The most common cause of the database container not coming up is changing the database type or version in the project configuration, so the database server daemon is unable to start using an existing configuration for a different type or version.

To solve this:

• Change the configuration in .ddev/config.yaml back to the original configuration.
• Export the database with ddev export-db.
• Delete the project with ddev delete, or stop the project and remove the database volume using docker volume rm <project>-mariadb or docker volume rm <project>-postgres.
• Update .ddev/config.yaml to use the new database type or version.
• Start the project and import the database from your export.

“web service unhealthy” or “web service starting” or Exited¶

Use ddev logs to see what’s wrong.

The most common cause of the web container being unhealthy is a user-defined .ddev/nginx-full/nginx-site.conf or .ddev/apache/apache-site.conf. Please rename these to <xxx_site.conf> during testing. To figure out what’s wrong with it after you’ve identified that as the problem, use ddev logs and review the error.

Changes to .ddev/nginx-site.conf and .ddev/apache/apache-site.conf take effect only when you do a ddev restart or the equivalent.

No Input File Specified (404) or Forbidden (403)¶

If you get a 404 with “No input file specified” (nginx) or a 403 with “Forbidden” (Apache) when you visit your project, it usually means that no index.php or index.html is being found in the docroot. This can result from:

• Misconfigured docroot: If the docroot isn’t where the web server thinks it is, then the web server won’t find index.php. Look at your .ddev/config.yaml to verify it has a docroot containing index.php. It should be a relative path.
• Missing index.php: There may not be an index.php or index.html in your project.

ddev start Fails and Logs Contain “failed (28: No space left on device)” - Docker File Space¶

If ddev start fails, it’s most often because the web or db container fails to start. In this case, the error message from ddev start says something like “Failed to start : db container failed: log=, err=container exited, please use ‘ddev logs -s db’ to find out why it failed”. You canddev logs -s db to find out what happened.

If you see any variant of “no space left on device” in the logs when using Docker Desktop, it means you have to increase or clean up Docker’s file space. Increase the “Disk image size” setting under “Resources” in Docker’s Preferences:

If you see “no space left on device” on Linux, it most likely means your filesystem is full.

ddev start Fails with “container failed to become ready”¶

A container fails to become ready when its health check is failing. This can happen to any of the containers, and you can usually find the issue with a docker inspect command.

For the web container:

docker inspect --format "{{json .State.Health }}" ddev-<projectname>-web | jq

For ddev-router:

docker inspect --format "{{json .State.Health }}" ddev-router

For ddev-ssh-agent:

docker inspect --format "{{json .State.Health }}" ddev-ssh-agent

Don’t forget to check logs using ddev logs for the web container, and ddev logs -s db for the db container!

For ddev-router and ddev-ssh-agent: docker logs ddev-router and docker logs ddev-ssh-agent.

Run ddev debug router-nginx-config to print the nginx configuration of the currently running ddev-router.

ddev start Fails with “Failed to start [project name]: No such container: ddev-router”¶

Deleting the images and re-pulling them generally solves this problem.

Try running the following commands from the host machine:

ddev poweroff
docker rm -f $(docker ps -aq)
docker rmi -f $(docker images -q)

You should then be able to start your DDEV machine.

ddev --version shows an old version¶

If you have installed the latest version of DDEV, but when you check the actual version with ddev --version, it shows an older version, please refer to Why do I have an old DDEV?

Trouble Building Dockerfiles¶

The additional .ddev/web-build/Dockerfile capability in DDEV is wonderful, but it can be hard to figure out what to put in there.

The best approach for any significant Dockerfile is to ddev ssh and sudo -s and then one at a time, do the things that you plan to do with a RUN command in the Dockerfile.

For example, if your Dockerfile were

RUN npm install --global forever

You could test it with ddev ssh, sudo -s, and then npm install --global forever.

The error messages you get will be more informative than messages that come when the Dockerfile is processed.

You can also see the output from the full Docker build using either

ddev debug refresh

or

~/.ddev/bin/docker-compose -f .ddev/.ddev-docker-compose-full.yaml --progress=plain build --no-cache

Docker build fails apt-get update, perhaps “SSL certificate problem: self-signed certificate”¶

The Docker build environment (where all projects have a little bit happening) is very sensitive to problems with apt-get update or with TLS certificate authentication. If you ware seeing problems with apt-get update failing, some of these strategies may help:

• WSL2: On WSL2 it’s a known issue that the WSL2 environment time can get out of sync with the real time. This is an ongoing problem with WSL2, and can be fixed with various workarounds. One good workaround is to install ntpdate and sudo ntpdate pool.ntp.org to sync the time. The time in WSL2 can get out of sync due to laptop sleeping or other causes. A reboot also fixes it.
• VPN: If you are on a packet-inspection VPN, it often causes problems with validation of certificates on internet sites. In that situation you’ll need to get the CA updates required and install them with a custom Dockerfile, as described on Stack Overflow.
• Other Docker Build: The Dockerfile build environment is different from the host-side build and different from what you get with ddev ssh. If you’re having trouble with it it may be caused by name resolution or IP connectivity problems, most often caused by a firewall or VPN. Turn off your firewall temporarily and VPN. A good debugging technique would be to do a simple .ddev/web-build/Dockerfile that does RUN curl -I https://www.google.com and then use ddev debug refresh to see the result. If it gets a 200 result, then your name resolution and internet connectivity are working in the Docker build environment.

DDEV Starts but Browser Can’t Access URL¶

You may see one of these messages in your browser:

• 403 Forbidden
• [url] server IP address could not be found
• We can’t connect to the server at [url]

If you get the 403 Forbidden it’s almost always because your docroot is set wrong. You should have something like docroot: web or docroot: "" or docroot: docroot with the relative path to the directory where your index.php lives in the project.

Name resolution: Most people use *.ddev.site URLs, which work great most of the time but require internet access.

*.ddev.site is a wildcard DNS entry that always returns the IP address 127.0.0.1 (localhost). If you’re not connected to the internet, however, or if various other name resolution issues fail, this name resolution won’t work.

While DDEV can create a web server and a Docker network infrastructure for a project, it doesn’t have control of your computer’s name resolution, so its backup technique to make a hostname resolvable by the browser is to add an entry to the hosts file (/etc/hosts on Linux and macOS, C:\Windows\system32\drivers\etc\hosts on traditional Windows).

• If you’re not connected to the internet, your browser will not be able to look up *.ddev.site hostnames. DDEV works fine offline, but for your browser to look up names they’ll have to be resolved in a different way.
• DDEV assumes that hostnames can be resolved within 3 seconds. That assumption is not valid on all networks or computers, so you can increase the amount of time it waits for resolution. Increasing to 5 seconds, for example: ddev config global --internet-detection-timeout-ms=5000.
• If DDEV detects that it can’t look up one of the hostnames assigned to your project for that or other reasons, it will try to add that to the hosts file on your computer, which requires administrative privileges (sudo or Windows UAC).
  • This technique may not work on Windows WSL2, see below.

DNS Rebinding Prohibited (Mostly on Fritzbox Routers)¶

You may see one of several messages:

• Cannot resolve
• unknown host
• No address associated with hostname

Some DNS servers prevent the use of DNS records that resolve to localhost (127.0.0.1) because in uncontrolled environments this may be used as a form of attack called DNS Rebinding. Since *.ddev.site resolves to 127.0.0.1, they may refuse to resolve, and your browser may be unable to look up a hostname, and give you messages like “ server IP address could not be found” or “We can’t connect to the server at ”.

You verify this is your problem by running ping -c 1 dkkd.ddev.site. If you get “No address associated with hostname” or something of that type, your computer is unable to look up *.ddev.site.

In this case, you can take any one of the following approaches:

1. Reconfigure your router to allow DNS Rebinding. Many Fritzbox routers have added default DNS Rebinding disallowal, and they can be reconfigured to allow it. See issue. If you have the local dnsmasq DNS server it may also be configured to disallow DNS rebinding, but it’s a simple change to a configuration directive to allow it.
2. Most computers can use most relaxed DNS resolution if they are not on corporate intranets that have non-internet DNS. So for example, the computer can be set to use 8.8.8.8 (Google) or 1.1.1.1 (Cloudflare) for DNS name resolution, see this article.
3. If you have control of the router, you can usually change its DHCP settings to choose a public, relaxed DNS server as in #2.
4. You can live with DDEV trying to edit the /etc/hosts file, which it only has to do when a new name is added to a project.

An extensive discussion of this class of problem is on ddev.com.

Windows WSL2 Network Issues¶

If you’re using a browser on Windows, accessing a project in WSL2, you can end up with confusing results when your project is listening on a port inside WSL2 while a Windows process is listening on that same port. The way to sort this out is to stop your project inside WSL2, verify that nothing is listening on the port there, and then study the port on the Windows side by visiting it with a browser or using other tools as described above.

Limitations on Symbolic Links (symlinks)¶

Symbolic links are widely used but have specific limitations in many environments beyond DDEV. Here are some of the ways those may affect you:

• Crossing mount boundaries: Symlinks may not generally cross between network mounts. In other words, if you have a relative symlink in the root of your project directory on the host that points to ../somefile.txt, that symlink will not be valid inside the container where ../ is a completely different filesystem (and is typically not mounted).
• Symlinks to absolute paths: If you have an absolute symlink to something like /Users/xxx/somefile.txt on the host, it will not be resolvable inside the container because /Users is not mounted there. Some tools, especially on Magento 2, may create symlinks to rooted paths, with targets like /var/www/html/path/to/something. These basically can’t make it to the host and may create errors.
• Windows restrictions on symlinks: Inside the Docker container on Windows, you may not be able to create a symlink that goes outside the container.
• Mutagen restrictions on Windows symlinks: On macOS and Linux (including WSL2) the default .ddev/mutagen/mutagen.yml chooses the posix-raw type of symlink handling. (See Mutagen docs). This basically means that any symlink created will try to sync, regardless of whether it’s valid in the other environment. However, Mutagen does not support posix-raw on traditional Windows, so DDEV uses the portable symlink mode. So on Windows with Mutagen, symlinks have to be strictly limited to relative links that are inside the Mutagen section of the project.

Delete and Re-Download Docker Images¶

In a few unusual cases, the actual downloaded Docker images can somehow get corrupted. Deleting the images will force them to be re-downloaded or rebuilt. This does no harm, as everything is rebuilt, but running ddev start will take longer while it downloads needed resources:

ddev poweroff
docker rm -f $(docker ps -aq) # Stop any other random containers that may be running
docker rmi -f $(docker images -q) # You might have to repeat this to get rid of all images