Django provides full support for anonymous sessions. The session framework lets you store and retrieve arbitrary data on a per-site-visitor basis. It stores data on the server side and abstracts the sending and receiving of cookies. Cookies contain a session ID – not the data itself (unless you’re using the cookie based backend).
Sessions are implemented via a piece of middleware.
To enable session functionality, do the following:
Edit the MIDDLEWARE
setting and make sure it contains
'django.contrib.sessions.middleware.SessionMiddleware'
. The default
settings.py
created by django-admin startproject
has
SessionMiddleware
activated.
If you don’t want to use sessions, you might as well remove the
SessionMiddleware
line from MIDDLEWARE
and
'django.contrib.sessions'
from your INSTALLED_APPS
.
It’ll save you a small bit of overhead.
By default, Django stores sessions in your database (using the model
django.contrib.sessions.models.Session
). Though this is convenient, in
some setups it’s faster to store session data elsewhere, so Django can be
configured to store session data on your filesystem or in your cache.
If you want to use a database-backed session, you need to add
'django.contrib.sessions'
to your INSTALLED_APPS
setting.
Once you have configured your installation, run manage.py migrate
to install the single database table that stores session data.
For better performance, you may want to use a cache-based session backend.
To store session data using Django’s cache system, you’ll first need to make sure you’ve configured your cache; see the cache documentation for details.
Warning
You should only use cache-based sessions if you’re using the Memcached or Redis cache backend. The local-memory cache backend doesn’t retain data long enough to be a good choice, and it’ll be faster to use file or database sessions directly instead of sending everything through the file or database cache backends. Additionally, the local-memory cache backend is NOT multi-process safe, therefore probably not a good choice for production environments.
If you have multiple caches defined in CACHES
, Django will use the
default cache. To use another cache, set SESSION_CACHE_ALIAS
to the
name of that cache.
Once your cache is configured, you have to choose between a database-backed cache or a non-persistent cache.
The cached database backend (cached_db
) uses a write-through cache –
session writes are applied to both the cache and the database. Session reads
use the cache, or the database if the data has been evicted from the cache. To
use this backend, set SESSION_ENGINE
to
"django.contrib.sessions.backends.cached_db"
, and follow the configuration
instructions for the using database-backed sessions.
The cache backend (cache
) stores session data only in your cache. This is
faster because it avoids database persistence, but you will have to consider
what happens when cache data is evicted. Eviction can occur if the cache fills
up or the cache server is restarted, and it will mean session data is lost,
including logging out users. To use this backend, set SESSION_ENGINE
to "django.contrib.sessions.backends.cache"
.
The cache backend can be made persistent by using a persistent cache, such as Redis with appropriate configuration. But unless your cache is definitely configured for sufficient persistence, opt for the cached database backend. This avoids edge cases caused by unreliable data storage in production.
To use file-based sessions, set the SESSION_ENGINE
setting to
"django.contrib.sessions.backends.file"
.
You might also want to set the SESSION_FILE_PATH
setting (which
defaults to output from tempfile.gettempdir()
, most likely /tmp
) to
control where Django stores session files. Be sure to check that your web
server has permissions to read and write to this location.
When SessionMiddleware
is activated, each HttpRequest
object – the first argument to any Django view function – will have a
session
attribute, which is a dictionary-like object.
You can read it and write to request.session
at any point in your view.
You can edit it multiple times.
This is the base class for all session objects. It has the following standard dictionary methods:
Example: fav_color = request.session['fav_color']
Example: request.session['fav_color'] = 'blue'
Example: del request.session['fav_color']
. This raises KeyError
if the given key
isn’t already in the session.
Example: 'fav_color' in request.session
Example: fav_color = request.session.get('fav_color', 'red')
Example: fav_color = request.session.pop('fav_color', 'blue')
It also has these methods:
Deletes the current session data from the session and deletes the session
cookie. This is used if you want to ensure that the previous session data
can’t be accessed again from the user’s browser (for example, the
django.contrib.auth.logout()
function calls it).
Sets a test cookie to determine whether the user’s browser supports cookies. Due to the way cookies work, you won’t be able to test this until the user’s next page request. See Setting test cookies below for more information.
Returns either True
or False
, depending on whether the user’s
browser accepted the test cookie. Due to the way cookies work, you’ll
have to call set_test_cookie()
on a previous, separate page request.
See Setting test cookies below for more information.
Deletes the test cookie. Use this to clean up after yourself.
Returns the value of the setting SESSION_COOKIE_AGE
. This can
be overridden in a custom session backend.
Sets the expiration time for the session. You can pass a number of different values:
If value
is an integer, the session will expire after that
many seconds of inactivity. For example, calling
request.session.set_expiry(300)
would make the session expire
in 5 minutes.
If value
is a datetime
or timedelta
object, the session
will expire at that specific date/time.
If value
is 0
, the user’s session cookie will expire
when the user’s web browser is closed.
If value
is None
, the session reverts to using the global
session expiry policy.
Reading a session is not considered activity for expiration purposes. Session expiration is computed from the last time the session was modified.
Returns the number of seconds until this session expires. For sessions
with no custom expiration (or those set to expire at browser close), this
will equal SESSION_COOKIE_AGE
.
This function accepts two optional keyword arguments:
modification
: last modification of the session, as a
datetime
object. Defaults to the current time.
expiry
: expiry information for the session, as a
datetime
object, an int
(in seconds), or
None
. Defaults to the value stored in the session by
set_expiry()
, if there is one, or None
.
Note
This method is used by session backends to determine the session expiry age in seconds when saving the session. It is not really intended for usage outside of that context.
In particular, while it is possible to determine the remaining
lifetime of a session just when you have the correct
modification
value and the expiry
is set as a datetime
object, where you do have the modification
value, it is more
straight-forward to calculate the expiry by-hand:
expires_at = modification + timedelta(seconds=settings.SESSION_COOKIE_AGE)
Returns the date this session will expire. For sessions with no custom
expiration (or those set to expire at browser close), this will equal the
date SESSION_COOKIE_AGE
seconds from now.
This function accepts the same keyword arguments as
get_expiry_age()
, and similar notes on usage apply.
Returns either True
or False
, depending on whether the user’s
session cookie will expire when the user’s web browser is closed.
Removes expired sessions from the session store. This class method is
called by clearsessions
.
Creates a new session key while retaining the current session data.
django.contrib.auth.login()
calls this method to mitigate against
session fixation.
By default, Django serializes session data using JSON. You can use the
SESSION_SERIALIZER
setting to customize the session serialization
format. Even with the caveats described in Write your own serializer, we highly
recommend sticking with JSON serialization especially if you are using the
cookie backend.
For example, here’s an attack scenario if you use pickle
to serialize
session data. If you’re using the signed cookie session backend and SECRET_KEY
(or any key of
SECRET_KEY_FALLBACKS
) is known by an attacker (there isn’t an
inherent vulnerability in Django that would cause it to leak), the attacker
could insert a string into their session which, when unpickled, executes
arbitrary code on the server. The technique for doing so is simple and easily
available on the internet. Although the cookie session storage signs the
cookie-stored data to prevent tampering, a SECRET_KEY
leak
immediately escalates to a remote code execution vulnerability.
A wrapper around the JSON serializer from django.core.signing
. Can
only serialize basic data types.
In addition, as JSON supports only string keys, note that using non-string
keys in request.session
won’t work as expected:
>>> # initial assignment
>>> request.session[0] = "bar"
>>> # subsequent requests following serialization & deserialization
>>> # of session data
>>> request.session[0] # KeyError
>>> request.session["0"]
'bar'
Similarly, data that can’t be encoded in JSON, such as non-UTF8 bytes like
'\xd9'
(which raises UnicodeDecodeError
), can’t be stored.
See the Write your own serializer section for more details on limitations of JSON serialization.
Supports arbitrary Python objects, but, as described above, can lead to a
remote code execution vulnerability if SECRET_KEY
or any key of
SECRET_KEY_FALLBACKS
becomes known by an attacker.
Deprecated since version 4.1: Due to the risk of remote code execution, this serializer is deprecated and will be removed in Django 5.0.
Note that the JSONSerializer
cannot handle arbitrary Python data types. As is often the case, there is a
trade-off between convenience and security. If you wish to store more advanced
data types including datetime
and Decimal
in JSON backed sessions, you
will need to write a custom serializer (or convert such values to a JSON
serializable object before storing them in request.session
). While
serializing these values is often straightforward
(DjangoJSONEncoder
may be helpful),
writing a decoder that can reliably get back the same thing that you put in is
more fragile. For example, you run the risk of returning a datetime
that
was actually a string that just happened to be in the same format chosen for
datetime
s).
Your serializer class must implement two methods,
dumps(self, obj)
and loads(self, data)
, to serialize and deserialize
the dictionary of session data, respectively.
Use normal Python strings as dictionary keys on request.session
. This
is more of a convention than a hard-and-fast rule.
Session dictionary keys that begin with an underscore are reserved for internal use by Django.
Don’t override request.session
with a new object, and don’t access or
set its attributes. Use it like a Python dictionary.
This simplistic view sets a has_commented
variable to True
after a user
posts a comment. It doesn’t let a user post a comment more than once:
def post_comment(request, new_comment):
if request.session.get("has_commented", False):
return HttpResponse("You've already commented.")
c = comments.Comment(comment=new_comment)
c.save()
request.session["has_commented"] = True
return HttpResponse("Thanks for your comment!")
This simplistic view logs in a “member” of the site:
def login(request):
m = Member.objects.get(username=request.POST["username"])
if m.check_password(request.POST["password"]):
request.session["member_id"] = m.id
return HttpResponse("You're logged in.")
else:
return HttpResponse("Your username and password didn't match.")
…And this one logs a member out, according to login()
above:
def logout(request):
try:
del request.session["member_id"]
except KeyError:
pass
return HttpResponse("You're logged out.")
The standard django.contrib.auth.logout()
function actually does a bit
more than this to prevent inadvertent data leakage. It calls the
flush()
method of request.session
.
We are using this example as a demonstration of how to work with session
objects, not as a full logout()
implementation.
Note
The examples in this section import the SessionStore
object directly
from the django.contrib.sessions.backends.db
backend. In your own code,
you should consider importing SessionStore
from the session engine
designated by SESSION_ENGINE
, as below:
>>> from importlib import import_module
>>> from django.conf import settings
>>> SessionStore = import_module(settings.SESSION_ENGINE).SessionStore
An API is available to manipulate session data outside of a view:
>>> from django.contrib.sessions.backends.db import SessionStore
>>> s = SessionStore()
>>> # stored as seconds since epoch since datetimes are not serializable in JSON.
>>> s["last_login"] = 1376587691
>>> s.create()
>>> s.session_key
'2b1189a188b44ad18c35e113ac6ceead'
>>> s = SessionStore(session_key="2b1189a188b44ad18c35e113ac6ceead")
>>> s["last_login"]
1376587691
SessionStore.create()
is designed to create a new session (i.e. one not
loaded from the session store and with session_key=None
). save()
is
designed to save an existing session (i.e. one loaded from the session store).
Calling save()
on a new session may also work but has a small chance of
generating a session_key
that collides with an existing one. create()
calls save()
and loops until an unused session_key
is generated.
If you’re using the django.contrib.sessions.backends.db
backend, each
session is a normal Django model. The Session
model is defined in
django/contrib/sessions/models.py. Because it’s a normal model, you can
access sessions using the normal Django database API:
>>> from django.contrib.sessions.models import Session
>>> s = Session.objects.get(pk="2b1189a188b44ad18c35e113ac6ceead")
>>> s.expire_date
datetime.datetime(2005, 8, 20, 13, 35, 12)
Note that you’ll need to call
get_decoded()
to get the session
dictionary. This is necessary because the dictionary is stored in an encoded
format:
>>> s.session_data
'KGRwMQpTJ19hdXRoX3VzZXJfaWQnCnAyCkkxCnMuMTExY2ZjODI2Yj...'
>>> s.get_decoded()
{'user_id': 42}
By default, Django only saves to the session database when the session has been modified – that is if any of its dictionary values have been assigned or deleted:
# Session is modified.
request.session["foo"] = "bar"
# Session is modified.
del request.session["foo"]
# Session is modified.
request.session["foo"] = {}
# Gotcha: Session is NOT modified, because this alters
# request.session['foo'] instead of request.session.
request.session["foo"]["bar"] = "baz"
In the last case of the above example, we can tell the session object
explicitly that it has been modified by setting the modified
attribute on
the session object:
request.session.modified = True
To change this default behavior, set the SESSION_SAVE_EVERY_REQUEST
setting to True
. When set to True
, Django will save the session to the
database on every single request.
Note that the session cookie is only sent when a session has been created or
modified. If SESSION_SAVE_EVERY_REQUEST
is True
, the session
cookie will be sent on every request.
Similarly, the expires
part of a session cookie is updated each time the
session cookie is sent.
The session is not saved if the response’s status code is 500.
You can control whether the session framework uses browser-length sessions vs.
persistent sessions with the SESSION_EXPIRE_AT_BROWSER_CLOSE
setting.
By default, SESSION_EXPIRE_AT_BROWSER_CLOSE
is set to False
,
which means session cookies will be stored in users’ browsers for as long as
SESSION_COOKIE_AGE
. Use this if you don’t want people to have to
log in every time they open a browser.
If SESSION_EXPIRE_AT_BROWSER_CLOSE
is set to True
, Django will
use browser-length cookies – cookies that expire as soon as the user closes
their browser. Use this if you want people to have to log in every time they
open a browser.
This setting is a global default and can be overwritten at a per-session level
by explicitly calling the set_expiry()
method
of request.session
as described above in using sessions in views.
Note
Some browsers (Chrome, for example) provide settings that allow users to
continue browsing sessions after closing and reopening the browser. In
some cases, this can interfere with the
SESSION_EXPIRE_AT_BROWSER_CLOSE
setting and prevent sessions
from expiring on browser close. Please be aware of this while testing
Django applications which have the
SESSION_EXPIRE_AT_BROWSER_CLOSE
setting enabled.
As users create new sessions on your website, session data can accumulate in
your session store. If you’re using the database backend, the
django_session
database table will grow. If you’re using the file backend,
your temporary directory will contain an increasing number of files.
To understand this problem, consider what happens with the database backend.
When a user logs in, Django adds a row to the django_session
database
table. Django updates this row each time the session data changes. If the user
logs out manually, Django deletes the row. But if the user does not log out,
the row never gets deleted. A similar process happens with the file backend.
Django does not provide automatic purging of expired sessions. Therefore,
it’s your job to purge expired sessions on a regular basis. Django provides a
clean-up management command for this purpose: clearsessions
. It’s
recommended to call this command on a regular basis, for example as a daily
cron job.
Note that the cache backend isn’t vulnerable to this problem, because caches automatically delete stale data. Neither is the cookie backend, because the session data is stored by the users’ browsers.
A few Django settings give you control over session behavior:
Subdomains within a site are able to set cookies on the client for the whole domain. This makes session fixation possible if cookies are permitted from subdomains not controlled by trusted users.
For example, an attacker could log into good.example.com
and get a valid
session for their account. If the attacker has control over bad.example.com
,
they can use it to send their session key to you since a subdomain is permitted
to set cookies on *.example.com
. When you visit good.example.com
,
you’ll be logged in as the attacker and might inadvertently enter your
sensitive personal data (e.g. credit card info) into the attacker’s account.
Another possible attack would be if good.example.com
sets its
SESSION_COOKIE_DOMAIN
to "example.com"
which would cause
session cookies from that site to be sent to bad.example.com
.
The session dictionary accepts any json
serializable value when using
JSONSerializer
.
Session data is stored in a database table named django_session
.
Django only sends a cookie if it needs to. If you don’t set any session data, it won’t send a session cookie.
SessionStore
object¶When working with sessions internally, Django uses a session store object from
the corresponding session engine. By convention, the session store object class
is named SessionStore
and is located in the module designated by
SESSION_ENGINE
.
All SessionStore
classes available in Django inherit from
SessionBase
and implement data manipulation methods,
namely:
exists()
create()
save()
delete()
load()
In order to build a custom session engine or to customize an existing one, you
may create a new class inheriting from SessionBase
or
any other existing SessionStore
class.
You can extend the session engines, but doing so with database-backed session engines generally requires some extra effort (see the next section for details).
Creating a custom database-backed session engine built upon those included in
Django (namely db
and cached_db
) may be done by inheriting
AbstractBaseSession
and either SessionStore
class.
AbstractBaseSession
and BaseSessionManager
are importable from
django.contrib.sessions.base_session
so that they can be imported without
including django.contrib.sessions
in INSTALLED_APPS
.
The abstract base session model.
Primary key. The field itself may contain up to 40 characters. The current implementation generates a 32-character string (a random sequence of digits and lowercase ASCII letters).
A string containing an encoded and serialized session dictionary.
A datetime designating when the session expires.
Expired sessions are not available to a user, however, they may still
be stored in the database until the clearsessions
management
command is run.
Returns a session store class to be used with this session model.
Returns decoded session data.
Decoding is performed by the session store class.
You can also customize the model manager by subclassing
BaseSessionManager
:
Returns the given session dictionary serialized and encoded as a string.
Encoding is performed by the session store class tied to a model class.
Saves session data for a provided session key, or deletes the session in case the data is empty.
Customization of SessionStore
classes is achieved by overriding methods
and properties described below:
Implements database-backed session store.
Override this method to return a custom session model if you need one.
Returns a new instance of the session model object, which represents the current session state.
Overriding this method provides the ability to modify session model data before it’s saved to database.
Implements cached database-backed session store.
A prefix added to a session key to build a cache key string.
The example below shows a custom database-backed session engine that includes an additional database column to store an account ID (thus providing an option to query the database for all active sessions for an account):
from django.contrib.sessions.backends.db import SessionStore as DBStore
from django.contrib.sessions.base_session import AbstractBaseSession
from django.db import models
class CustomSession(AbstractBaseSession):
account_id = models.IntegerField(null=True, db_index=True)
@classmethod
def get_session_store_class(cls):
return SessionStore
class SessionStore(DBStore):
@classmethod
def get_model_class(cls):
return CustomSession
def create_model_instance(self, data):
obj = super().create_model_instance(data)
try:
account_id = int(data.get("_auth_user_id"))
except (ValueError, TypeError):
account_id = None
obj.account_id = account_id
return obj
If you are migrating from the Django’s built-in cached_db
session store to
a custom one based on cached_db
, you should override the cache key prefix
in order to prevent a namespace clash:
class SessionStore(CachedDBStore):
cache_key_prefix = "mysessions.custom_cached_db_backend"
# ...
The Django sessions framework is entirely, and solely, cookie-based. It does not fall back to putting session IDs in URLs as a last resort, as PHP does. This is an intentional design decision. Not only does that behavior make URLs ugly, it makes your site vulnerable to session-ID theft via the “Referer” header.
Dec 25, 2023