Module naming schemes¶

Up until now we have used EasyBuild's default module naming scheme (EasyBuildMNS), which produces module files with names that closely resemble to the names of the corresponding easyconfig files. For example, when installing h5py-3.6.0-foss-2021b.eb the generated module was named h5py/3.6.0-foss-2021b.

EasyBuild supports several different module naming schemes:

$ eb --avail-module-naming-schemes
List of supported module naming schemes:
        EasyBuildMNS
        MigrateFromEBToHMNS
        HierarchicalMNS
        CategorizedHMNS
        CategorizedModuleNamingScheme

In this part of the tutorial we will take a closer look at HierarchicalMNS, which is the standard hierarchical module naming scheme included with EasyBuild.

We will also take a quick look at implementing our own custom module naming scheme.

Flat vs hierarchical¶

The default module naming scheme EasyBuildMNS is an example of regular "flat" module naming scheme, which is characterized by:

all module files are directly available for loading;
each module name uniquely identifies a particular installation;

In contrast, a hierarchical module naming scheme consists of a hierarchy of module files.

The typical module hierarchy has 3 levels:

a core level, where module files for software that was installed using the system toolchain are kept;
a compiler level, where module files for software that was installed using a compiler-only toolchain are stored;
and an MPI level, which houses module files for software that was installed using a toolchain that includes (at least) a compiler and MPI component;

Here is a simple example of such a 3-level module hierarchy:

In this example the core level only includes a single module GCC/11.2.0, while the compiler level includes two modules: OpenMPI/4.1.1 and MPICH/3.4.2. In the MPI level, three modules are available: one for FFTW, one for ScaLAPACK, and one for HDF5.

Initially only the modules on the top level of a module hierarchy are available for loading. If you run "module avail" with the example module hierarchy, you will only see the GCC/11.2.0 module.

Some modules in the top level of the hierarchy act as a "gateway" to modules in the next level below. To make additional modules available for loading one of these gateway modules has to be loaded. In our example, loading the GCC/11.2.0 module results in two additional modules coming into view from the compiler level, as indicated by the arrows: the modules for OpenMPI and MPICH. These correspond to installations of OpenMPI and MPICH that were built using GCC/11.2.0 as a (compiler-only) toolchain.

Similarly, the OpenMPI/4.1.1 module serves as a gateway to the three modules in the MPI level. Only by loading the OpenMPI module will these additional three modules become available for loading. They correspond to software installations built using the gompi/2021b toolchain that consists of the GCC/11.2.0 compiler module and the OpenMPI/4.1.1 MPI module. Software installed using foss/2021b (which is a full toolchain that also includes OpenBLAS, FFTW and ScaLAPACK) would also be stored in this level of the module hierarchy.

The characteristics of a module hierarchy are:

not all module files are directly available for loading;
some modules serve as a gateway to more modules;
to access some software installations you will first need to load one or more gateway modules in order to use them;

You can probably think of other ways to organize module files in a hierarchical module tree, but here we will stick to the standard Core-Compiler-MPI hierarchy.

Pros & cons¶

So why go through all this trouble of organizing modules hierarchically?

There are a couple of advantages to this approach:

shorter module names;
less overwhelming list of available modules;
only compatible modules can be loaded together;

However, the are some minor disadvantages too:

not all existing modules are directly visible;
gateway modules may have little meaning to end users;

Length of module names¶

When using a flat module naming scheme, module names can be fairly long and perhaps confusing. For our HDF5 installation for example, we have HDF5/1.12.1-gompi-2021b as module name. The -gompi-2021b part of the name refers to the toolchain that was used for this installation, but it may be confusing to some people (what kind of Pokémon is a "gompi"?!).

In the example module hierarchy shown above, the module for HDF5 is named HDF5/1.12.1 which is basically the bare essentials: software name and version. That's way better, nice and clean!

Amount of available modules¶

The output of "module avail" can be quite overwhelming if lots of module files are installed and a flat module naming scheme is used, since all modules are always available. EasyBuild makes it very easy to install lots of software, so the number of installed modules can easily grow into the hundreds or even thousands...

This often explosive growth of modules is less of an issue when using a hierarchical module naming scheme, since initially only a small set of modules are available, and relatively limited groups of additional modules become available as gateway modules are loaded.

Loading compatible modules¶

Since all modules are available at once when using a flat module naming scheme, you can easily load modules together that are not compatible with each other.

Imagine loading two modules that were built with a different compiler toolchain (different compiler, different MPI library). That's likely to end in tears, unless you have the necessary technical expertise to fully understand what is going on, and you are being very careful...

In a module hierarchy this can be prevented, since modules for software that were installed with a different compiler and/or a different MPI library are located in a different part of the module hierarchy, and so these modules can not be loaded together easily.

Visibility of existing modules¶

One downside of a module hierarchy is that not all existing modules are directly available for loading or are even visible to the user, since the output of "module avail" only shows a subset of all modules.

Lmod has a solution for this though: it provides a separate "module spider" command to search for module files throughout the entire module hierarchy. So as long as the end users are aware of this additional command, it should not be difficult to discover which software installations exist and how they can be accessed. The "module spider" command will inform the user which of the gateway modules need to be loaded in order to load a specific module file.

Semantics of gateway modules¶

An additional potential problem of a module hierarchy is that the semantics of the gateway modules may not be clear to end users. They may wonder why they need to pick a specific compiler and MPI library, or which of the available options is the best one. Maybe there are not even be aware what exactly a "compiler" is, or how it is relevant to the software they need in their bioinformatics pipeline...

This can be partially resolved by loading a default compiler and MPI module so a particular set of modules is available right after login, which could be the ones used in the most recent toolchain, or the recommended versions. More experienced users could then leverage the "module spider" command to navigate the module hierarchy.

Using a custom module naming scheme¶

Next to the module naming schemes that are included with EasyBuild, you can also define your own module naming scheme (MNS), and configure EasyBuild to use it.

Implementation¶

To use a custom module naming scheme, you need to implement a Python module file, where you define a Python class that derives from the general ModuleNamingScheme class.

For a flat module naming scheme, it is sufficient to implement the det_full_module_name method, which should return a string value (the full module name). You may also need to customize the is_short_modname_for method, which verifies whether a given (short) module name is for the software with a particular given name (or not).

The argument provided to det_full_module_name can be a small Python dictionary which only specifies the value of a handful of easyconfig parameters (name, version, toolchain, and versionsuffix), or an EasyConfig instance which represents a parsed easyconfig file and contains values for all known easyconfig parameters.

For simple module naming schemes, just have name, version, toolchain, and versionsuffix available is sufficient. If it is not, you can list which additional easyconfig parameters are required for your module naming scheme via a class constant REQUIRED_KEYS.

A fairly straightforward example of a flat module name scheme is the default EasyBuild module naming scheme EasyBuildMNS.

For a hierarchical module naming scheme, various additional methods have to be implemented.

Some of these, like det_module_subdir and det_short_module_name, determine which part of the (full) module name determines the location of the module in the module hierarchy, and which part is the user-facing (or "short") module name. Others, like det_modpath_extensions, determine which modules are gateway modules that open up an additional level of the hierarchy (by extending the $MODULEPATH).

A typical example of a hierarchical module naming scheme is HierarchicalMNS that comes with EasyBuild (which is quite complex because it includes quite a bit of special handling for particular compiler toolchains), which implements the traditional Core-Compiler-MPI module hierarchy we discussed above.

Configuring EasyBuild¶

To let EasyBuild use a custom module naming scheme, you need to:

specify the path to the Python module file implementing it via the include-module-naming-schemes EasyBuild configuration option;
indicate that you also want to use this custom module naming scheme via the module-naming-scheme EasyBuild configuration option.

For example:

export EASYBUILD_INCLUDE_MODULE_NAMING_SCHEMES=$HOME/easybuild/example_mns.py
export EASYBUILD_MODULE_NAMING_SCHEME=ExampleMNS

Example custom module naming scheme¶

Here is an example of a custom module naming scheme, where:

the versionsuffix goes directly after the version;
all dashes are replaced by underscores;
all module names are lowercase;

Note that we also need to customise the is_short_modname_for method, to make sure it returns True when the EasyBuild framework checks whether scipy_bundle/2021.10_foss_2021b is a module name for SciPy-bundle.

import os

from easybuild.tools.module_naming_scheme.mns import ModuleNamingScheme


class ExampleMNS(ModuleNamingScheme):

    REQUIRED_KEYS = ['name', 'version', 'versionsuffix', 'toolchain']

    def det_full_module_name(self, ec):
        """
        Determine full module name:
        - all lowercase
        - replace all dashes with underscores
        """
        parts = [ec['version']]

        # versionsuffix directly after version (but only if it's not empty)
        if ec['versionsuffix']:
            parts.append(ec['versionsuffix'])

        # only add toolchain name/version for non-system toolchain
        tc = ec['toolchain']
        if tc['name'].lower() != 'system':
            parts.extend([tc['name'], tc['version']])

        modname = ec['name'] + '/' + '_'.join(parts)

        modname = modname.replace('-', '_').replace('__', '_')

        return modname.lower()

    def is_short_modname_for(self, short_modname, name):
        """Determine whether short module name is a module for the software with specified name."""
        return short_modname.startswith(name.lower().replace('-', '_') + '/')

We can see what the module names with this module naming scheme would like like via eb -D:

$ eb SciPy-bundle-2021.10-foss-2021b-Python-2.7.18.eb -D
 ...
 * [ ] $CFGS/g/GCC/GCC-11.2.0.eb (module: gcc/11.2.0)
 ...
 * [ ] $CFGS/p/Python/Python-2.7.18-GCCcore-11.2.0.eb (module: python/2.7.18_gcccore_11.2.0)
 ...
 * [ ] $CFGS/o/OpenMPI/OpenMPI-4.1.1-GCC-11.2.0.eb (module: openmpi/4.1.1_gcc_11.2.0)
 ...
 * [ ] $CFGS/s/SciPy-bundle/SciPy-bundle-2021.10-foss-2021b-Python-2.7.18.eb (module: scipy_bundle/2021.10_python_2.7.18_foss_2021b)

Example module hierarchy: HDF5¶

Now that we know more about hierarchical module naming schemes, let us see how EasyBuild can help us with generating a hierarchical module tree.

In this example we will use EasyBuild to generate modules organised in a hierarchy for some of the software that is already installed in the prepared environment.

The good news is that the existing installations can be reused. There is absolutely no need to reinstall the software, we are just creating a different "view" on these software installations.

Preparing the environment¶

Before running EasyBuild to generate a hierarchical module tree, we have to be a bit careful with preparing our environment.

We must absolutely avoid mixing modules from a flat and hierarchical module naming scheme!

Some module files will have the same name in both module trees (like GCC/11.2.0 for example), but their contents will be different. Mixing modules from a flat and hierarchical module tree will trigger problems...

So we have to make sure that the module files we already have in /easybuild are not visible. The easiest way to do this is to unload all modules (using "module purge") and resetting the module search path to be empty, which we can do with "module unuse $MODULEPATH".

module purge
module unuse $MODULEPATH

In this part of the tutorial, we are assuming you are not using an EasyBuild installation provided through a module. We have just made all modules unavailable, so we would have to first install EasyBuild again in our hierarchical module tree before we can continue.

We strongly recommend using an EasyBuild installation that was installed via "pip install" or "pip3 install" in this part of the tutorial.

An easy way to do this is in the prepared environment is to run:

unset PIP_PREFIX
pip3 install --user easybuild
export PATH=$HOME/.local/bin:$PATH
export EB_PYTHON=python3

Configuring EasyBuild¶

First of all, we need to make sure that EasyBuild is properly configured. We can do this by defining this set of environment variables:

export EASYBUILD_PREFIX=$HOME/easybuild
export EASYBUILD_BUILDPATH=/tmp/$USER/easybuild
export EASYBUILD_INSTALLPATH_SOFTWARE=/easybuild/software
export EASYBUILD_MODULE_NAMING_SCHEME=HierarchicalMNS
export EASYBUILD_INSTALLPATH_MODULES=$HOME/hmns/modules
export EASYBUILD_LOCKS_DIR=$HOME/easybuild/locks

To make sure we didn't make any silly mistakes, we double check using eb --show-config:

$ eb --show-config
#
# Current EasyBuild configuration
# (C: command line argument, D: default value, E: environment variable, F: configuration file)
#
buildpath            (E) = /tmp/example/easybuild
containerpath        (E) = /home/example/easybuild/containers
installpath          (E) = /home/example/easybuild
installpath-modules  (E) = /home/example/hmns/modules
installpath-software (E) = /easybuild/software
locks-dir            (E) = /home/example/easybuild/locks
module-naming-scheme (E) = HierarchicalMNS
packagepath          (E) = /home/example/easybuild/packages
prefix               (E) = /home/example/easybuild
repositorypath       (E) = /home/example/easybuild/ebfiles_repo
robot-paths          (D) = /home/example/.local/easybuild/easyconfigs
sourcepath           (E) = /home/example/easybuild/sources

There are a couple of things worth pointing out here:

We have defined the module-naming-scheme configuration setting to HierarchicalMNS, which makes EasyBuild use the included standard hierarchical module naming scheme (the classic core / compiler / MPI one we discussed above).
We have specified different locations for the software (via installpath-software) and the module files (via installpath-modules). This is important because we want to reuse the software that is already installed in /easybuild/software while we want to generate an entirely new module tree for it (in $HOME/hmns/modules).

The other configuration settings are the same as before, and mostly irrelevant for this example.

Generating modules for HDF5¶

Let's now generate a hierarchical module tree for HDF5 and all of its dependencies, including the toolchain. That sounds complicated, and it sort of is since there are a lot of details you have to get right for the module hierarchy to works as intended, but EasyBuild can do all the hard work for us.

The steps we will have to go through are:

Tell EasyBuild we want to "install" the HDF5-1.12.1-gompi-2021b.eb easyconfig file;
Enable dependency resolution via --robot;
Instruct EasyBuild to only generate the module files, not to install the software (since it is there already in /easybuild/software), via the --module-only option.

These steps translate to this single eb command:

$ eb HDF5-1.12.1-gompi-2021b.eb --robot --module-only
...
== building and installing MPI/GCC/11.2.0/OpenMPI/4.1.1/HDF5/1.12.1...
...
== sanity checking...
== cleaning up [skipped]
== creating module...
...
== COMPLETED: Installation ended successfully (took 17 sec)
...
== Build succeeded for 42 out of 42

This should take a couple of minutes in total, for generating 42 modules. Remember that this also includes generating module files for the toolchain and all of its components.

In addition, there is a bit more going on one that just generating module files, since the sanity check step is still being run for each of the installations when using --module-only to ensure the installation is actually functional. After all, there is no point in generating a module for an obviously broken installation...

Loading the HDF5 module¶

After generating the hierarchical module tree for HDF5, how do we access the HDF5 installation through it?

Here's what the module tree looks like on disk:

$ ls $HOME/hmns/modules/all
Compiler  Core  MPI

Those are basically the 3 levels in the module hierarchy we showed in our example earlier.

The starting point is the top level of the module hierarchy named Core:

module use $HOME/hmns/modules/all/Core

Let's see what that gives us in terms of available modules:

$ module avail

------------------------ /home/easybuild/hmns/modules/all/Core -------------------------
   binutils/2.37    GCC/11.2.0        gompi/2021b    OpenSSL/1.1
   Bison/3.8.2      GCCcore/11.2.0    M4/1.4.19      pkg-config/0.29.2
   flex/2.6.4       gettext/0.21      ncurses/6.2    zlib/1.2.11

Nice and short module names, but only a limited set of them.

We know a module file exists for HDF5, but we can't see it yet (and hence we can't load it either).

$ module avail HDF5
No module(s) or extension(s) found!
Use "module spider" to find all possible modules and extensions.

Let's see if module spider is of any help, as "module avail" so kindly suggests:

$ module spider HDF5
...

    You will need to load all module(s) on any one of the lines below
    before the "HDF5/1.12.1" module is available to load.

      GCC/11.2.0  OpenMPI/4.1.1

This tells us we need to load two gateway modules before we can load the module for HDF5.

Let's start with loading the GCC compiler module:

module load GCC/11.2.0

And then check again which modules are available:

$ module avail

--------------------------- /home/easybuild/hmns/modules/all/Compiler/GCC/11.2.0 ---------------------------
   OpenMPI/4.1.1

------------------------- /home/easybuild/hmns/modules/all/Compiler/GCCcore/11.2.0 -------------------------
   Autoconf/2.71               flex/2.6.4        (D)    libreadline/8.1        pkg-config/0.29.2  (D)
   Automake/1.16.4             groff/1.22.4             libtool/2.4.6          PMIx/4.1.0
   Autotools/20210726          help2man/1.48.3          libxml2/2.9.10         Szip/2.1.1
   binutils/2.37      (L,D)    hwloc/2.5.0              M4/1.4.19       (D)    UCX/1.11.2
   Bison/3.7.6                 libevent/2.1.12          ncurses/6.2     (D)    xorg-macros/1.19.3
   DB/18.1.40                  libfabric/1.13.2         numactl/2.0.14         XZ/5.2.5
   expat/2.4.1                 libpciaccess/0.16        Perl/5.34.0            zlib/1.2.11        (L,D)

---------------------------------- /home/easybuild/hmns/modules/all/Core -----------------------------------
   binutils/2.37        GCC/11.2.0     (L)    gompi/2021b    OpenSSL/1.1
   Bison/3.8.2   (D)    GCCcore/11.2.0 (L)    M4/1.4.19      pkg-config/0.29.2
   flex/2.6.4           gettext/0.21          ncurses/6.2    zlib/1.2.11

Good news, we now have additional modules available!

The compiler level of our hierarchy actually consists of two directories here: Compiler/GCCcore/11.2.0 and Compiler/GCC/11.2.0. The modules in the GCCcore directory are ones we can use in other compiler toolchains that use GCC 11.2.0 as a base compiler (the details of that are out of scope here).

The module we are interested in is OpenMPI/4.1.1, which is another gateway module.

Remember that the "module spider" output told us that there does indeed exist a module for HDF5, but that we need to load both the GCC/11.2.0 and OpenMPI/4.1.1 modules first.

So, let us do exactly that (remember that GCC/11.2.0 is already loaded):

module load OpenMPI/4.1.1

If you now check the output of "module avail" again, you should see the HDF5/1.12.1 module:

$ module avail

-------- /home/easybuild/hmns/modules/all/MPI/GCC/11.2.0/OpenMPI/4.1.1 -------
   HDF5/1.12.1

------------ /home/easybuild/hmns/modules/all/Compiler/GCC/11.2.0 ------------
   OpenMPI/4.1.1 (L)

...

To use HDF5, we need to load this HDF5/1.12.1 module. We can verify that the installation works using one of the commands provided by HDF5, h5dump for example:

module load HDF5/1.12.1

$ h5dump --version
h5dump: Version 1.12.1

If you now check which modules are loaded via "module list", you will notice that all module names and nice and short now, which is one of the advantages of using a hierarchical module tree:

$ module list

Currently Loaded Modules:
  1) GCCcore/11.2.0   5) numactl/2.0.14      9) hwloc/2.5.0      13) libfabric/1.13.2  17) HDF5/1.12.1
  2) zlib/1.2.11      6) XZ/5.2.5           10) OpenSSL/1.1      14) PMIx/4.1.0
  3) binutils/2.37    7) libxml2/2.9.10     11) libevent/2.1.12  15) OpenMPI/4.1.1
  4) GCC/11.2.0       8) libpciaccess/0.16  12) UCX/1.11.2       16) Szip/2.1.1

Exercise¶

Now it is your turn!

Try to get a feeling for how a hierarchical module tree works by:

installing the missing modules for the SciPy-bundle-2021.10-foss-2021b.eb in the module hierarchy we generated for HDF5;
figure out where the SciPy-bundle module is located in the hierarchy, and then also load it;

You can verify your work by running this command (since pandas is one of the Python packages included in the SciPy-bundle installation):

python -c 'import pandas; print(pandas.__version__)'

Start from a clean slate, by first running:

module purge
module unuse $MODULEPATH

(click to show solution)

Step 0: check which modules are still missing, using --missing or -M:
```
eb SciPy-bundle-2021.10-foss-2021b.eb -M
```
The output should tell you that 24 out of 64 required modules are still missing.
Install the missing modules in the module hierarchy we have generated in $HOME/hmns/modules:
```
eb SciPy-bundle-2021.10-foss-2021b.eb --robot --module-only
```
Don't forget to use both --robot (to enable dependency resolution) and --module-only (to only run the sanity check and generate module files, not install the software again).
Start at the top of the module hierarchy (the Core level), and run module spider to check which gateway modules to load to make SciPy-bundle available:
```
module use $HOME/hmns/modules/all/Core
module spider SciPy-bundle/2021.10
```
Load the gateway modules:
```
module load GCC/11.2.0 OpenMPI/4.1.1
```

Check that the SciPy-bundle module is available, and load it:

$ module avail SciPy-bundle
----- /home/example/hmns/modules/all/MPI/GCC/11.2.0/OpenMPI/4.1.1 ------
   SciPy-bundle/2021.10

module load SciPy-bundle/2021.10

Run the test command:

$ python -c 'import pandas; print(pandas.__version__)'
1.3.4

next: EasyBuild at Jülich Supercomputing Centre - (back to overview page)

Last update: May 27, 2022