:Authors: - Josh Bailey

Faucet on ZodiacFX
==================

Introduction
------------

`ZodiacFX <https://northboundnetworks.com/products/zodiac-fx>`_ is a small
4 port multi table OF1.3 switch from
`Northbound Networks <https://northboundnetworks.com/>`_.

Caveats
-------

- ZodiacFX allows only one controller (so you cannot run Gauge).
- The default OF port is 6633; it is recommended to use 6653.
- It is recommended to enable ether type filtering to minimize corrupt packets.

Applying recommended config
---------------------------

You can use the following expect script to program the recommended configuration:

.. literalinclude:: conf-zodiac.sh
  :language: shell
  :caption: conf-zodiac.sh
  :name: conf-zodiac

Example of running the script:

.. code:: console

    $ sudo ./conf-zodiac.sh
    spawn [open ...]
    get initial prompt

     _____             ___               _______  __
    /__  /  ____  ____/ (_)___ ______   / ____/ |/ /
      / /  / __ \/ __  / / __ `/ ___/  / /_   |   /
     / /__/ /_/ / /_/ / / /_/ / /__   / __/  /   |
    /____/\____/\__,_/_/\__,_/\___/  /_/    /_/|_|
          	    by Northbound Networks


    Type 'help' for a list of available commands

    Zodiac_FX#
    Zodiac_FX# found initial prompt
    config
    Zodiac_FX(config)# setting ethertype-filter
    set ethertype-filter enable
    EtherType Filtering Enabled
    Zodiac_FX(config)# setting of-portset of-port 6653
    OpenFlow Port set to 6653
    Zodiac_FX(config)# save
    Writing Configuration to EEPROM (197 bytes)
    Zodiac_FX(config)# exit
    Zodiac_FX# restart
    Restarting the Zodiac FX, please reopen your terminal application.