.. |fpga_name| replace:: RHS Research Nitefury II
.. |hwdb_entry_name| replace:: ``nitefury_firesim_rocket_singlecore_no_nic``
.. |hwdb_entry_name_non_code| replace:: nitefury_firesim_rocket_singlecore_no_nic
.. |builder_name| replace:: Xilinx Vivado
.. |bit_builder_path| replace:: ``bit-builder-recipes/rhsresearch_nitefury_ii.yaml``
.. |vivado_with_version| replace:: Vivado 2022.1
.. |vivado_version_number_only| replace:: 2022.1
.. |vivado_default_install_path| replace:: ``/tools/Xilinx/Vivado/2022.1``
.. |board_package_install| replace:: No special board support package is required for the Nitefury II. Move on to the next step.

Building Your Own Hardware Designs
===================================================================

This section will guide you through building a |fpga_name| FPGA bitstream to run FireSim simulations.

.. include:: Xilinx-XDMA-Build-Farm-Setup-Template.rst

.. include:: Xilinx-All-Bitstream-Template.rst