INSTALLATION

Use these instructions to install Geotrek-admin in an easy way on a dedicated Ubuntu Bionic 18.04 LTS server for production. For another distributions, please use the Docker installation method. It requires more technical skills. Lastly, for a developer instance, please follow the dedicated procedure.

Requirements

A first estimation of minimal required system resources are:

  • 2 cores

  • 4 Go RAM

  • 20 Go disk space

For big instances required system resources are:

  • 4 cores

  • 8 Go RAM or more

  • 50 Go disk space or more (20 Go + estimated size of attached files like photos, including elements imported from SIT)

Software requirements are :

  • Ubuntu Bionic 18.04 LTS. Server flavor is recommended but any other flavors work too (desktop…)

An Internet connection with open HTTP and HTTPS destination ports is required.

Information to prepare before installation

These information will be asked during the installation process and are the basic configuration of Geotrek-admin:

  • The domain name or IP to use to access to Geotrek-admin web application.

  • Rando server name: the domain name to use to access to Geotrek-rando website (optional, if appropriate).

  • PostgreSQL host, port, user, password and DB name if you use an external DB server.

  • The SRID of the projection to use to store geometries. The projection must match your geographic area and coordinates must be in meters.

  • The list of languages into which translation of contents will be made

  • The name or acronym of your organization

Fresh installation

Run the following command in a shell prompt on your server:

curl https://packages.geotrek.fr/install.sh | bash

If you don’t want to use a local database, you can run the following command instead. This will prevent the script to install PostgreSQL server locally. Don’t forget to enable PostGIS extension in your remote database before installation.

curl https://packages.geotrek.fr/install.sh | bash -s - --nodb

Then create the application administrator account and connect to the web interface.

sudo geotrek createsuperuser

If you are not confident with the install.sh script, or if you are having troubles, you can do the same operations by hand:

  1. Add deb https://packages.geotrek.fr/ubuntu bionic main to APT sources list.

  2. Add https://packages.geotrek.fr/geotrek.gpg.key to apt keyring.

  3. Run apt-get update

  4. If you want to use a local database, install PostGIS package (before installing Geotrek-admin, not at the same time). If not, you must create database and enable PostGIS extension before.

  5. Install the Geotrek-admin package (sudo apt install geotrek-admin).

Note

Geotrek-admin is automatically installed in /opt/geotrek-admin/ directory.

The installation automatically creates an internal geotrek linux user, owner of this directory

The Geotrek-admin Python application is located in /opt/geotrek-admin/lib/python3.6/site-packages/geotrek directory

Upgrade

From Geotrek-admin >= 2.33

To upgrade the whole server, including Geotrek-admin, run:

sudo apt-get update
sudo apt-get upgrade

If your current version is <= 2.40.1 you should run instead:

sudo apt-get update  --allow-releaseinfo-change
sudo apt-get upgrade

To prevent upgrading Geotrek-admin with the whole distribution, you can run:

sudo apt-mark hold geotrek-admin

To upgrade only Geotrek-admin and its dependencies, run:

sudo apt-get install geotrek-admin

From Geotrek-admin <= 2.32

First of all, make sure your current Geotrek-admin version works correctly. Especially, after an upgrade of the Ubuntu distribution, you will have to run ./install.sh before proceeding with Geotrek-admin upgrade.

Then, go inside your existing Geotrek-admin installation directory and run the dedicated migration script:

curl https://packages.geotrek.fr/migrate.sh | bash

Check if SPATIAL_EXTENT is well set in /opt/geotrek-admin/var/conf/custom.py (see Advanced configuration section)

Note

Geotrek-admin is now automatically installed in /opt/geotrek-admin/ directory and the advanced configuration file moved to /opt/geotrek-admin/var/conf/custom.py (with spatial extent, map and modules configuration…).

See advanced configuration documentation for details.

The etc/settings.ini file is replaced by basic configuration, updated with sudo dpkg-reconfigure geotrek-admin command (database, SRID, languages, server_name, timeout…).

Update your imports, synchronization and backup commands and directories.

Server migration

It is a new installation with an additional backup/restore and a file transfert in between. The commands below are examples to adapt to your actual configuration (server names, database configuration). These commands apply to versions >= 2.33. If your version is below 2.33, please check the doc of your version.

Backup settings, media files and database on the old server:

sudo -u postgres pg_dump -Fc geotrekdb > geotrekdb.backup
tar cvzf data.tgz geotrekdb.backup /opt/geotrek-admin/var/conf/ /opt/geotrek-admin/var/media/

Restore files on the new server:

scp old_server_ip:path/to/data.tgz .
tar xvzf data.tgz

Troubleshooting

Geotrek-admin logs are stored in /opt/geotrek-admin/var/log/geotrek.log file. But if Geotrek-admin does not start, take a look to systemd logs for each of the 3 Geotrek-admin services (user web interface, API and asynchronous tasks):

sudo journalctl -eu geotrek-ui
sudo journalctl -eu geotrek-api
sudo journalctl -eu geotrek-celery

The output is paginated. With -e option you are at the end of the logs but you can go up an down with arrows. Type Q to quit. If you want to copy the log to a file, do:

sudo journalctl -u geotrek-ui > systemd-geotrek-ui.log

Uninstallation

Run:

apt-get remove geotrek-admin

Media files will be left in /opt/geotrek-admin/var directory. To remove them, run:

apt-get purge geotrek-admin

To remove dependencies (convertit, screamshooter…), run:

apt-get autoremove

Note

PostgreSQL and its database will not be removed by these commands. If need be, remove them manually.