Writing Mathematics for MathJax
Putting mathematics in a web page
To put mathematics in your web page, you can use TeX and LaTeX notation, MathML notation, AsciiMath notation, or a combination of all three within the same page; the MathJax configuration tells MathJax which you want to use, and how you plan to indicate the mathematics when you are using TeX/LaTeX or AsciiMath notation. These three formats are described in more detail below.
TeX and LaTeX input
Mathematics that is written in TeX or LaTeX format is indicated using math delimiters that surround the mathematics, telling MathJax what part of your page represents mathematics and what is normal text. There are two types of equations: ones that occur within a paragraph (in-line mathematics), and larger equations that appear separated from the rest of the text on lines by themselves (displayed mathematics).
The default math delimiters are $$...$$ and \[...\] for
displayed mathematics, and \(...\) for in-line mathematics. Note
in particular that the $...$ in-line delimiters are not used
by default. That is because dollar signs appear too often in
non-mathematical settings, which could cause some text to be treated
as mathematics unexpectedly. For example, with single-dollar
delimiters, “… the cost is $2.50 for the first one, and $2.00 for
each additional one …” would cause the phrase “2.50 for the first
one, and” to be treated as mathematics since it falls between dollar
signs. See the section on TeX and LaTeX Math Delimiters for more information on using dollar signs as
delimiters.
Here is a complete sample page containing TeX mathematics (see the MathJax Web Demos Repository for more).
<!DOCTYPE html>
<html>
<head>
<title>MathJax TeX Test Page</title>
<script src="https://polyfill.io/v3/polyfill.min.js?features=es6"></script>
<script type="text/javascript" id="MathJax-script" async
src="https://cdn.jsdelivr.net/npm/mathjax@3/es5/tex-chtml.js">
</script>
</head>
<body>
When \(a \ne 0\), there are two solutions to \(ax^2 + bx + c = 0\) and they are
$$x = {-b \pm \sqrt{b^2-4ac} \over 2a}.$$
</body>
</html>
Since the TeX notation is part of the text of the page, there are some caveats that you must keep in mind when you enter your mathematics. In particular, you need to be careful about the use of less-than signs, since those are what the browser uses to indicate the start of a tag in HTML. Putting a space on both sides of the less-than sign should be sufficient, but see TeX and LaTeX support for more details.
If you are using MathJax within a blog, wiki, or other content management system, the markup language used by that system may interfere with the TeX notation used by MathJax. For example, if your blog uses Markdown notation for authoring your pages, the underscores used by TeX to indicate subscripts may be confused with the use of underscores by Markdown to indicate italics, and the two uses may prevent your mathematics from being displayed. See TeX and LaTeX support for some suggestions about how to deal with the problem.
There are a number of extensions for the TeX input processor that are
loaded by combined components that include the TeX input format (e.g.,
tex-chtml.js), and others that are loaded automatically when
needed. See TeX and LaTeX Extensions for
details on TeX extensions that are available.
MathML input
For mathematics written in MathML notation, you mark your mathematics
using standard <math> tags, where <math display="block">
represents displayed mathematics and <math display="inline"> or
just <math> represents in-line mathematics.
MathML notation will work with MathJax in HTML files, not just XHTML
files, even in older browsers and that the web page need not be served
with any special MIME-type. Note, however, that in HTML (as opposed to
XHTML), you should not include a namespace prefix for your <math>
tags; for example, you should not use <m:math> except in an XHTML file
where you have tied the m namespace to the MathML DTD by adding the
xmlns:m="http://www.w3.org/1998/Math/MathML" attribute to your file’s
<html> tag.
In order to make your MathML work in the widest range of situations,
it is recommended that you include the
xmlns="http://www.w3.org/1998/Math/MathML" attribute on all
<math> tags in your document (and this is preferred to the use of
a namespace prefix like m: above, since those are deprecated in
HTML5), although this is not strictly required.
Here is a complete sample page containing MathML mathematics (see the MathJax Web Demos Repository for more).
<!DOCTYPE html>
<html>
<head>
<title>MathJax MathML Test Page</title>
<script src="https://polyfill.io/v3/polyfill.min.js?features=es6"></script>
<script type="text/javascript" id="MathJax-script" async
src="https://cdn.jsdelivr.net/npm/mathjax@3/es5/mml-chtml.js">
</script>
</head>
<body>
<p>
When
<math xmlns="http://www.w3.org/1998/Math/MathML">
<mi>a</mi><mo>≠</mo><mn>0</mn>
</math>,
there are two solutions to
<math xmlns="http://www.w3.org/1998/Math/MathML">
<mi>a</mi><msup><mi>x</mi><mn>2</mn></msup>
<mo>+</mo> <mi>b</mi><mi>x</mi>
<mo>+</mo> <mi>c</mi> <mo>=</mo> <mn>0</mn>
</math>
and they are
<math xmlns="http://www.w3.org/1998/Math/MathML" display="block">
<mi>x</mi> <mo>=</mo>
<mrow>
<mfrac>
<mrow>
<mo>−</mo>
<mi>b</mi>
<mo>±</mo>
<msqrt>
<msup><mi>b</mi><mn>2</mn></msup>
<mo>−</mo>
<mn>4</mn><mi>a</mi><mi>c</mi>
</msqrt>
</mrow>
<mrow>
<mn>2</mn><mi>a</mi>
</mrow>
</mfrac>
</mrow>
<mtext>.</mtext>
</math>
</p>
</body>
</html>
When entering MathML notation in an HTML page (rather than an XHTML page), you should not use self-closing tags, as these are not part of HTML, but should use explicit open and close tags for all your math elements. For example, you should use
<mspace width="5pt"></mspace>
rather than <mspace width="5pt" /> in an HTML document. If you
use the self-closing form, some browsers will not build the math tree
properly, and MathJax will receive a damaged math structure, which
will not be rendered as the original notation would have been.
Typically, this will cause parts of your expression to not be
displayed. Unfortunately, there is nothing MathJax can do about that,
since the browser has incorrectly interpreted the tags long before
MathJax has a chance to work with them.
See the MathML page for more on MathJax’s MathML support.
AsciiMath input
MathJax v2.0 introduced a new input format, AsciiMath notation, by incorporating ASCIIMathML. This input processor has not been fully ported to MathJax version 3 yet, but there is a version of it that uses the legacy version 2 code to patch it into MathJax version 3. None of the combined components currently include it, so you would need to specify it explicitly in your MathJax configuration in order to use it. See the AsciiMath page for more details.
By default, you mark mathematical expressions written in AsciiMath by
surrounding them in “back-ticks”, i.e., `...`.
Here is a complete sample page containing AsciiMath notation:
<!DOCTYPE html>
<html>
<head>
<title>MathJax AsciiMath Test Page</title>
<script>
MathJax = {
loader: {load: ['input/asciimath', 'output/chtml']}
}
</script>
<script src="https://polyfill.io/v3/polyfill.min.js?features=es6"></script>
<script type="text/javascript" id="MathJax-script" async
src="https://cdn.jsdelivr.net/npm/mathjax@3/es5/startup.js">
</script>
<body>
<p>When `a != 0`, there are two solutions to `ax^2 + bx + c = 0` and
they are</p>
<p style="text-align:center">
`x = (-b +- sqrt(b^2-4ac))/(2a) .`
</p>
</body>
</html>
See the AsciiMath support page for more on MathJax’s AsciiMath support and how to configure it.
Putting Math in Javascript Strings
If your are using javascript to process mathematics, and need to put a
TeX or LaTeX expression in a string literal, you need to be aware that
javascript uses the backslash (\) as a special character in
strings. Since TeX uses the backslash to indicate a macro name, you
often need backslashes in your javascript strings. In order to
achieve this, you must double all the backslashes that you want to
have as part of your javascript string. For example,
var math = '\\frac{1}{\\sqrt{x^2 + 1}}';
This can be particularly confusing when you are using the LaTeX macro \, which must both be doubled, as \\. So you would do
var array = '\\begin{array}{cc} a & b \\\\ c & d \\end{array}';
to produce an array with two rows.