platform = wiznet7500
The IOP (Internet Offload Processor) W7500 is the one-chip solution which integrates an ARM Cortex-M0, 128KB Flash and hardwired TCP/IP core for various embedded application platform especially requiring Internet of things
For more detailed information please visit vendor site.
Name |
Description |
|---|---|
mbed Framework |
|
OpenOCD |
|
gcc-arm-embedded |
Warning
Linux Users:
Install “udev” rules file 99-platformio-udev.rules (an instruction is located inside a file).
Raspberry Pi users, please read this article Enable serial port on Raspberry Pi.
Windows Users:
Please check that you have a correctly installed USB driver from board manufacturer
Name |
Description |
|---|---|
The mbed framework The mbed SDK has been designed to provide enough hardware abstraction to be intuitive and concise, yet powerful enough to build complex projects. It is built on the low-level ARM CMSIS APIs, allowing you to code down to the metal if needed. In addition to RTOS, USB and Networking libraries, a cookbook of hundreds of reusable peripheral and module libraries have been built on top of the SDK by the mbed Developer Community. |
Note
You can list pre-configured boards by platformio boards command or PlatformIO Boards Explorer
For more detailed board information please scroll tables below by
horizontal.
ID |
Name |
Platform |
Debug |
Microcontroller |
Frequency |
Flash |
RAM |
|---|---|---|---|---|---|---|---|
|
WIZNET7500 |
48 MHz |
128 Kb |
48 Kb |
|||
|
WIZNET7500ECO |
48 MHz |
128 Kb |
48 Kb |
|||
|
WIZNET7500P |
48 MHz |
128 Kb |
48 Kb |