Samsung ARTIK¶

platform = samsung_artik

The Samsung ARTIK Smart IoT platform brings hardware modules and cloud services together, with built-in security and an ecosystem of tools and partners to speed up your time-to-market.

For more detailed information please visit vendor site.

Configuration ¶

If you are using the Samsung ARTIK platform on macOS or Linux, you need to perform the configuration steps detailed below to enable support for deployment and debugging.

Windows ¶

Usually Windows Update Service will automatically install FTDI driver. You can choose an off-line installation and install FTDI driver manually.

After installation, you will have two FTDI devices. Please use zadig tool to change one FTDI device to a “libusb” compatible device.

macOS ¶

First check that you have a FTDI compatible driver on your mac:

kextstat | grep FTDI

You should have com.apple.driver.AppleUSBFTDI.

Install ARTIK FTDI Driver
Reboot your system.

Linux ¶

Create a new file named /etc/udev/rules.d/51-artik053.rules and add the following line:

SUBSYSTEM=="usb", ATTR{idVendor}=="0403", ATTR{idProduct}=="6010", MODE="0660", GROUP="plugdev", SYMLINK+="artik053-%n"

Examples ¶

Examples are listed from Samsung ARTIK development platform repository:

Debugging ¶

PIO Unified Debugger - “1-click” solution for debugging with a zero configuration.

Supported debugging tools are listed in “Debug” column. For more detailed information, please scroll table by horizontal. You can switch between debugging Tools using debug_tool options.

External tools¶

Boards listed below are compatible with PIO Unified Debugger but depend on external debugging tools. See “Debug” column for compatible debugging tools.

ID	Name	Debug	MCU	Frequency	Flash	RAM
`artik_053`	Samsung ARTIK053	Custom (default)	S5JT200	320MHz	8MB	1.25MB

Stable and upstream versions ¶

You can switch between stable releases of Samsung ARTIK development platform and the latest upstream version using platform option as described below:

; Custom stable version
[env:stable]
platform =samsung_artik@x.y.z
board = ...
...

; The latest upstream/development version
[env:upstream]
platform = https://github.com/platformio/platform-samsung_artik.git
board = ...
...

Packages ¶

Name	Description
framework-tizenrt	TizenRT RTOS with library
tool-artik-openocd	OpenOCD for ARTIK
toolchain-gccarmnoneeabi	gcc-arm-embedded

Warning

Linux Users:

Install “udev” rules 99-platformio-udev.rules

Raspberry Pi users, please read this article Enable serial port on Raspberry Pi.

Windows Users:

Please check that you have a correctly installed USB driver from board manufacturer

Frameworks ¶

Name	Description
Tizen RT	Tizen RT is a lightweight RTOS-based platform to support low-end IoT devices

Boards ¶

Note

You can list pre-configured boards by platformio boards command or PlatformIO Boards Explorer
For more detailed board information please scroll tables below by horizontal.

Samsung¶

ID	Name	Debug	MCU	Frequency	Flash	RAM
`artik_053`	Samsung ARTIK053	Yes	S5JT200	320MHz	8MB	1.25MB