PlatformIO
v3.5.3

Getting Started

Configuration

Instruments

PlatformIO Plus

Integration

Miscellaneous

PIO Unit Testing

New in version 3.0: (PlatformIO Plus)

Unit Testing (wiki) is a software testing method by which individual units of source code, sets of one or more MCU program modules together with associated control data, usage procedures, and operating procedures, are tested to determine whether they are fit for use. Unit testing finds problems early in the development cycle.

Demo

Demo of Local & Embedded: Calculator.

../../_images/pioplus-unit-testing-demo.png

Tutorials and Examples

Tutorials

Project Examples

For the other examples and source code please follow to PlatformIO Unit Testing Examples repository.

Configuration

PIO Unit Testing Engine can be configured from Project Configuration File platformio.ini

Test Types

Desktop

PIO Unit Testing Engine builds a test program for a host machine using Native development platform. This test could be run only with the desktop or Continuous Integration VM instance.

Note

PlatformIO does not install any toolchains automatically for Native and requires GCC toolchain to be installed on your host machine. Please open Terminal and check that the gcc command is installed.

Embedded

PIO Unit Testing Engine builds a special firmware for a target device (board) and program it. Then, it connects to this device using configured Serial test_port and communicate via test_transport. Finally, it runs test on an embedded side, collects results, analyzes them and provides a summary on a host machine side (desktop).

Note

Please note that the PIO Unit Testing Engine uses the first available Serial/UART implementation (depending on a framework) as a communication interface between the PIO Unit Testing Engine and target device. If you use Serial in your project libraries, please wrap/hide Serial-based blocks with #ifndef UNIT_TEST macro.

Also, you can create custom test_transport and implement base interface.

Test Runner

Test Runner allows you to process specific environments or ignore a test using “Glob patterns”. You can also ignore a test for specific environments using a test_ignore option from Project Configuration File platformio.ini.

Local

Allows you to run a test on a host machine or on a target device (board) which is directly connected to the host machine. In this case, you need to use the platformio test command.

Remote

Allows you to run test on a remote machine or remote target device (board) without having to depend on OS software, extra software, SSH, VPN or opening network ports. Remote Unit Testing works in pair with PIO Remote™. In this case, you need to use the special command platformio remote test.

PlatformIO supports multiple Continuous Integration systems where you can run unit tests at the each integration stage. See real PlatformIO Remote Unit Testing Example.

Workflow

  1. Create PlatformIO project using the platformio init command. For Desktop Unit Testing (on a host machine), you need to use Native.

    ; PlatformIO Project Configuration File
;
;   Build options: build flags, source filter, extra scripting
;   Upload options: custom port, speed and extra flags
;   Library options: dependencies, extra library storages
;
; Please visit documentation for the other options and examples
; http://docs.platformio.org/page/projectconf.html

;
; Embedded platforms
;

[env:uno]
platform = atmelavr
framework = arduino
board = uno

[env:nodemcu]
platform = espressif8266
framework = arduino
board = nodemcuv2

;
; Desktop platforms (Win, Mac, Linux, Raspberry Pi, etc)
; See https://platformio.org/platforms/native
;

[env:native]
platform = native

  2. Create a test folder in a root of your project. See test_dir.

  3. Write a test using API. Each test is a small independent program/firmware with its own main() or setup()/loop() functions. Test should start with UNITY_BEGIN() and finish with UNITY_END() calls.

    Warning

    If your board does not support software reseting via Serial.DTR/RTS, you should add >2 seconds delay before UNITY_BEGIN()`. That time is needed to establish a ``Serial connection between a host machine and a target device.

    delay(2000); // for Arduino framework
wait(2);     // for ARM mbed framework
UNITY_BEGIN();

  4. Place a test in the test directory. If you have more than one test, split them into sub-folders. For example, test/test_1/*.[c,cpp,h], test_N/*.[c,cpp,h], etc. If there is no such directory in the test``folder, then |PIOUTE| will treat the source code of ``test folder as SINGLE test.

  5. Run test using the platformio test command.

Hint

If you have a shared code between your “main” program (from src_dir) and “test” program, please put it into project’s private libraries folder (lib_dir). See Local & Embedded: Calculator example.

API

Summary of the Unity Test API:

  • Running Tests

    • RUN_TEST(func, linenum)

  • Ignoring Tests

    • TEST_IGNORE()

    • TEST_IGNORE_MESSAGE (message)

  • Aborting Tests

    • TEST_PROTECT()

    • TEST_ABORT()

  • Basic Validity Tests

    • TEST_ASSERT_TRUE(condition)

    • TEST_ASSERT_FALSE(condition)

    • TEST_ASSERT(condition)

    • TEST_ASSERT_UNLESS(condition)

    • TEST_FAIL()

    • TEST_FAIL_MESSAGE(message)

  • Numerical Assertions: Integers

    • TEST_ASSERT_EQUAL_INT(expected, actual)

    • TEST_ASSERT_EQUAL_INT8(expected, actual)

    • TEST_ASSERT_EQUAL_INT16(expected, actual)

    • TEST_ASSERT_EQUAL_INT32(expected, actual)

    • TEST_ASSERT_EQUAL_INT64(expected, actual)

    • TEST_ASSERT_EQUAL_UINT(expected, actual)

    • TEST_ASSERT_EQUAL_UINT8(expected, actual)

    • TEST_ASSERT_EQUAL_UINT16(expected, actual)

    • TEST_ASSERT_EQUAL_UINT32(expected, actual)

    • TEST_ASSERT_EQUAL_UINT64(expected, actual)

    • TEST_ASSERT_EQUAL_HEX(expected, actual)

    • TEST_ASSERT_EQUAL_HEX8(expected, actual)

    • TEST_ASSERT_EQUAL_HEX16(expected, actual)

    • TEST_ASSERT_EQUAL_HEX32(expected, actual)

    • TEST_ASSERT_EQUAL_HEX64(expected, actual)

    • TEST_ASSERT_EQUAL_HEX8_ARRAY(expected, actual, elements)

    • TEST_ASSERT_EQUAL(expected, actual)

    • TEST_ASSERT_INT_WITHIN(delta, expected, actual)

  • Numerical Assertions: Bitwise

    • TEST_ASSERT_BITS(mask, expected, actual)

    • TEST_ASSERT_BITS_HIGH(mask, actual)

    • TEST_ASSERT_BITS_LOW(mask, actual)

    • TEST_ASSERT_BIT_HIGH(mask, actual)

    • TEST_ASSERT_BIT_LOW(mask, actual)

  • Numerical Assertions: Floats

    • TEST_ASSERT_FLOAT_WITHIN(delta, expected, actual)

    • TEST_ASSERT_EQUAL_FLOAT(expected, actual)

    • TEST_ASSERT_EQUAL_DOUBLE(expected, actual)

  • String Assertions

    • TEST_ASSERT_EQUAL_STRING(expected, actual)

    • TEST_ASSERT_EQUAL_STRING_LEN(expected, actual, len)

    • TEST_ASSERT_EQUAL_STRING_MESSAGE(expected, actual, message)

    • TEST_ASSERT_EQUAL_STRING_LEN_MESSAGE(expected, actual, len, message)

  • Pointer Assertions

    • TEST_ASSERT_NULL(pointer)

    • TEST_ASSERT_NOT_NULL(pointer)

  • Memory Assertions

    • TEST_ASSERT_EQUAL_MEMORY(expected, actual, len)

User Guide (CLI)