Get started with Arduino and Nordic nRF52-DK: debugging and unit testing¶

Setting Up the Project¶

At first step, we need to create a new project using PlatformIO Home Page (to open this page just press Home icon on the toolbar):

On the next step we need to select Nordic nRF52-DK as a development board, Arduino as a framework and a path to the project location (or use the default one):

Processing the selected project may take some amount of time (PlatformIO will download and install all required packages) and after these steps, we have a fully configured project that is ready for developing code with Arduino framework.

Adding Code to the Generated Project¶

Let’s add some actual code to the project. Firstly, we open a default main file named main.cpp in the src_dir folder and replace its content with next one:

#include <Arduino.h>

void setup()
{
    pinMode(LED_BUILTIN, OUTPUT);
}

void loop()
{
    digitalWrite(LED_BUILTIN, HIGH);
    delay(100);
    digitalWrite(LED_BUILTIN, LOW);
    delay(100);
}

After this step, we created a basic blink project ready for compiling and uploading.

Compiling and Uploading the Firmware¶

Now we can build the project. To compile firmware we can use three options: Using Build button on PlatformIO Toolbar, using Command Palette View: Command Palette > PlatformIO: Build, using Task Menu Tasks: Run Task... > PlatformIO: Build or via hotkeys cmd-alt-b / ctrl-alt-b:

If everything went well, we should see a successful result message in the terminal window:

Now we can upload firmware to the board: Using Upload button on PlatformIO Toolbar, using Command Palette View: Command Palette > PlatformIO: Upload, using Task Menu Tasks: Run Task... > PlatformIO: Upload or via hotkeys cmd-alt-u / ctrl-alt-u:

After successful uploading, the green LED1 should start blinking.

Debugging the Firmware¶

PIO Unified Debugger offers the easiest way to debug your board. Just navigate to the top menu and select Debug: Start debugging or use hotkey button F5:

We need to wait some time while PlatformIO is initializing debug session and when the first line after the main function is highlighted we are ready to debug:

We can walk through the code using control buttons, set breakpoints, add variables to Watch window:

Writing Unit Tests¶

Test cases can be added to a single file that may include multiple tests. First of all, in this file, we need to add three default functions: setUp, tearDown, setup and loop. setUp and tearDown are used to initialize and finalize test conditions. Implementations of these functions are not required for running tests but if you need to initialize some variables before you run a test, you use the setUp function and if you need to clean up variables you use tearDown function. In our example we will use these functions to accordingly initialize and deinitialize LED. setup and loop functions act as a simple Arduino program where we describe our test plan.

Let’s implement some basic tests for blinking routine:

#include <Arduino.h>
#include <unity.h>

// void setUp(void) {
// // set stuff up here
// }

// void tearDown(void) {
// // clean stuff up here
// }

void test_led_builtin_pin_number(void)
{
    TEST_ASSERT_EQUAL(LED_BUILTIN, 13);
}

void test_led_state_high(void)
{
    digitalWrite(LED_BUILTIN, HIGH);
    TEST_ASSERT_EQUAL(digitalRead(LED_BUILTIN), LOW);
}

void test_led_state_low(void)
{
    digitalWrite(LED_BUILTIN, LOW);
    TEST_ASSERT_EQUAL(digitalRead(LED_BUILTIN), LOW);
}

void setup()
{
    UNITY_BEGIN();
    RUN_TEST(test_led_builtin_pin_number);
    pinMode(LED_BUILTIN, OUTPUT);

    for (uint8_t i = 0; i < 5; i++)
    {
        RUN_TEST(test_led_state_high);
        delay(200);
        RUN_TEST(test_led_state_low);
        delay(200);
    }

    UNITY_END(); // stop unit testing
}

void loop()
{
}

Now we are ready to upload tests to the board. To do this we can use Tasks: Run Task... > PlatformIO Test from top menu:

After processing we should see a detailed report about testing results:

As we can see from the report, all our tests were successful!

Adding Bluetooth LE features¶

To add the basic BLE functionality to our project we need to define the SoftDevice version and install a library called BLEPeripheral. Both these modifications can be specified in Project Configuration File platformio.ini:

[env:nrf52_dk]
platform = nordicnrf52
board = nrf52_dk
framework = arduino
; SoftDevice version
build_flags = -DNRF52_S132
lib_deps =
  BLEPeripheral

Now let’s create a basic application that can interact with other BLE devices (e.g phone) For example, next code declares a BLE characteristic that controls the state of the LED1

#include <Arduino.h>
#include <SPI.h>
#include <BLEPeripheral.h>

BLEPeripheral ledPeripheral = BLEPeripheral();

BLEService ledService = BLEService("19b10000e8f2537e4f6cd104768a1214");
BLECharCharacteristic ledCharacteristic = BLECharCharacteristic("19b10001e8f2537e4f6cd104768a1214", BLERead | BLEWrite);

void setup()
{
  pinMode(LED_BUILTIN, OUTPUT);

  ledPeripheral.setAdvertisedServiceUuid(ledService.uuid());
  ledPeripheral.addAttribute(ledService);
  ledPeripheral.addAttribute(ledCharacteristic);
  ledPeripheral.setLocalName("Nordic NRF52 DK");
  ledPeripheral.begin();
}

void loop()
{
  BLECentral central = ledPeripheral.central();

  if (central) {
    while (central.connected()) {
      if (ledCharacteristic.written()) {
        if (ledCharacteristic.value()) {
          digitalWrite(LED_BUILTIN, HIGH);
        }
        else{
          digitalWrite(LED_BUILTIN, LOW);
        }
      }
    }
  }
}

Now we can compile and upload this program to the board as described in previous sections. To verify that our application works as expected, we can use any Android smartphone with BLE feature and Nordic nRF Connect tool.

At first, we need to scan all advertising BLE devices and connect to the device called Nordic NRF52 DK. After a successful connection to the board, we should see one “Unknown Service” with one “Unknown Characteristic” fields:

To switch the LED on or off we just need write 0 or 1 as UINT8 to the BLE characteristic:

Conclusion¶

Now we have a project template for Nordic nRF52-DK board that we can use as a boilerplate for the next projects.