Samsung ARTIK¶

platform = samsung_artik

The Samsung ARTIK Smart IoT platform brings hardware modules and cloud services together, with built-in security and an ecosystem of tools and partners to speed up your time-to-market.

For more detailed information please visit vendor site.

Configuration ¶

If you are using the Samsung ARTIK platform on macOS or Linux, you need to perform the configuration steps detailed below to enable support for deployment and debugging.

Windows ¶

Usually Windows Update Service will automatically install FTDI driver. You can choose an off-line installation and install FTDI driver manually.

After installation, you will have two FTDI devices. Please use zadig tool to change one FTDI device to a “libusb” compatible device.

macOS ¶

First check that you have a FTDI compatible driver on your mac:

kextstat | grep FTDI

You should have com.apple.driver.AppleUSBFTDI.

Install ARTIK FTDI Driver
Reboot your system.

Linux ¶

Create a new file named /etc/udev/rules.d/51-artik053.rules and add the following line:

SUBSYSTEM=="usb", ATTR{idVendor}=="0403", ATTR{idProduct}=="6010", MODE="0660", GROUP="plugdev", SYMLINK+="artik053-%n"

Examples ¶

Examples are listed from Samsung ARTIK development platform repository:

Debugging ¶

PIO Unified Debugger - “1-click” solution for debugging with a zero configuration.

Supported debugging tools are listed in “Debug” column. For more detailed information, please scroll table by horizontal. You can switch between debugging Tools & Debug Probes using debug_tool options.

Warning

You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions.

External Debug Tools ¶

Boards listed below are compatible with PIO Unified Debugger but DEPEND ON external debug tool. See “Debug” column for compatible debug tools.

ID	Name	Debug	MCU	Frequency	Flash	RAM
`artik_053`	Samsung ARTIK053	FTDI Chip (default)	S5JT200	320MHz	8MB	1.25MB

Stable and upstream versions ¶

You can switch between stable releases of Samsung ARTIK development platform and the latest upstream version using platform option in Project Configuration File platformio.ini as described below.

Stable¶

; Latest stable version
[env:latest_stable]
platform = samsung_artik
board = ...

; Custom stable version
[env:custom_stable]
platform = samsung_artik@x.y.z
board = ...

Upstream¶

[env:upstream_develop]
platform = https://github.com/platformio/platform-samsung_artik.git
board = ...

Packages ¶

Name	Description
framework-tizenrt	TizenRT RTOS with library
tool-artik-openocd	OpenOCD for ARTIK
toolchain-gccarmnoneeabi	gcc-arm-embedded

Warning

Linux Users:

Install “udev” rules 99-platformio-udev.rules

Raspberry Pi users, please read this article Enable serial port on Raspberry Pi.

Windows Users:

Please check that you have a correctly installed USB driver from board manufacturer

Frameworks ¶

Name	Description
Tizen RT	Tizen RT is a lightweight RTOS-based platform to support low-end IoT devices

Boards ¶

Note

You can list pre-configured boards by platformio boards command or PlatformIO Boards Explorer
For more detailed board information please scroll tables below by horizontal.

Samsung¶

ID	Name	Debug	MCU	Frequency	Flash	RAM
`artik_053`	Samsung ARTIK053	Yes	S5JT200	320MHz	8MB	1.25MB