Note
A full list with project examples can be found in PlatformIO Repository.
Atmel AVR: Arduino UNO board with auto pre-configured
board_* and upload_* options (use only board option) and Arduino
Wiring-based Framework
[env:atmelavr_arduino_uno_board]
platform = atmelavr
framework = arduino
board = uno
; enable auto-uploading
targets = upload
Atmel AVR: Embedded board that is based on ATmega168 MCU with “arduino” bootloader
[env:atmelavr_atmega168_board]
platform = atmelavr
board_build.mcu = atmega168
board_build.f_cpu = 16000000L
upload_port = /dev/ttyUSB0
; for Windows OS
; upload_port = COM3
upload_protocol = arduino
upload_speed = 19200
; enable auto-uploading
targets = upload
Upload firmware via USB programmer (USBasp) to Atmel AVR microcontrollers
[env:atmelavr_usbasp]
platform = atmelavr
framework = arduino
board = pro8MHzatmega328
upload_protocol = usbasp
upload_flags = -Pusb -B5
Then upload firmware using target program for platformio run --target.
command. To use other programmers see Upload using Programmer.
ST STM32: Upload firmware using GDB script upload.gdb,
issue #175
[env:st_via_gdb]
platform = ststm32
board = armstrap_eagle512
upload_protocol = gdb
Also, take a look at this article Armstrap Eagle and PlatformIO.
ST STM32: Upload firmware using ST-Link instead mbed’s media disk
[env:stlink_for_mbed]
platform = ststm32
board = disco_f100rb
upload_protocol = stlink