The goal of this tutorial is to demonstrate how is simple to use PIO Unit Testing.
Level: Beginner
Platforms: Windows, macOS, Linux
Please navigate to Quick Start section and create the “Blink Project”.
Create a test directory in the project (on the same level as src)
and place test_main.cpp file in it (the source code is located below).
Run tests using platformio test command.
project_dir
├── lib
│ └── readme.txt
├── platformio.ini
├── src
│ └── ...
└── test
└── test_main.cpp
platformio.ini
; PlatformIO Project Configuration File
;
; Build options: build flags, source filter, extra scripting
; Upload options: custom port, speed and extra flags
; Library options: dependencies, extra library storages
;
; Please visit documentation for the other options and examples
; http://docs.platformio.org/page/projectconf.html
[env:uno]
platform = atmelavr
framework = arduino
board = uno
[env:nodemcu]
platform = espressif8266
framework = arduino
board = nodemcu
[env:teensy31]
platform = teensy
framework = arduino
board = teensy31
test/test_main.cpp
#include <Arduino.h>
#include <unity.h>
// void setUp(void) {
// // set stuff up here
// }
// void tearDown(void) {
// // clean stuff up here
// }
void test_led_builtin_pin_number(void) {
TEST_ASSERT_EQUAL(LED_BUILTIN, 13);
}
void test_led_state_high(void) {
digitalWrite(LED_BUILTIN, HIGH);
TEST_ASSERT_EQUAL(digitalRead(LED_BUILTIN), HIGH);
}
void test_led_state_low(void) {
digitalWrite(LED_BUILTIN, LOW);
TEST_ASSERT_EQUAL(digitalRead(LED_BUILTIN), LOW);
}
void setup() {
// NOTE!!! Wait for >2 secs
// if board doesn't support software reset via Serial.DTR/RTS
delay(2000);
UNITY_BEGIN(); // IMPORTANT LINE!
RUN_TEST(test_led_builtin_pin_number);
pinMode(LED_BUILTIN, OUTPUT);
}
uint8_t i = 0;
uint8_t max_blinks = 5;
void loop() {
if (i < max_blinks)
{
RUN_TEST(test_led_state_high);
delay(500);
RUN_TEST(test_led_state_low);
delay(500);
i++;
}
else if (i == max_blinks) {
UNITY_END(); // stop unit testing
}
}
> platformio test -e nodemcu --verbose
PIO Plus (https://pioplus.com) v0.1.0
Verbose mode can be enabled via `-v, --verbose` option
Collected 1 items
============================== [test/*] Building... (1/3) ==============================
[Wed Sep 7 15:16:55 2016] Processing nodemcu (platform: espressif8266, board: nodemcu, framework: arduino)
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Verbose mode can be enabled via `-v, --verbose` option
Collected 34 compatible libraries
Looking for dependencies...
Project does not have dependencies
Compiling .pioenvs/nodemcu/src/main.o
Compiling .pioenvs/nodemcu/test/output_export.o
Compiling .pioenvs/nodemcu/test/test_main.o
Compiling .pioenvs/nodemcu/UnityTestLib/unity.o
Archiving .pioenvs/nodemcu/libFrameworkArduinoVariant.a
Indexing .pioenvs/nodemcu/libFrameworkArduinoVariant.a
Compiling .pioenvs/nodemcu/FrameworkArduino/Esp.o
Compiling .pioenvs/nodemcu/FrameworkArduino/FS.o
Compiling .pioenvs/nodemcu/FrameworkArduino/HardwareSerial.o
Compiling .pioenvs/nodemcu/FrameworkArduino/IPAddress.o
Archiving .pioenvs/nodemcu/libUnityTestLib.a
Indexing .pioenvs/nodemcu/libUnityTestLib.a
Compiling .pioenvs/nodemcu/FrameworkArduino/MD5Builder.o
...
Compiling .pioenvs/nodemcu/FrameworkArduino/umm_malloc/umm_malloc.o
Archiving .pioenvs/nodemcu/libFrameworkArduino.a
Indexing .pioenvs/nodemcu/libFrameworkArduino.a
Linking .pioenvs/nodemcu/firmware.elf
Calculating size .pioenvs/nodemcu/firmware.elf
text data bss dec hex filename
223500 2408 29536 255444 3e5d4 .pioenvs/nodemcu/firmware.elf
Building .pioenvs/nodemcu/firmware.bin
============================== [test/*] Uploading... (2/3) ==============================
[Wed Sep 7 15:17:01 2016] Processing nodemcu (platform: espressif8266, board: nodemcu, framework: arduino)
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Verbose mode can be enabled via `-v, --verbose` option
Collected 34 compatible libraries
Looking for dependencies...
Project does not have dependencies
Linking .pioenvs/nodemcu/firmware.elf
Checking program size .pioenvs/nodemcu/firmware.elf
text data bss dec hex filename
223500 2408 29536 255444 3e5d4 .pioenvs/nodemcu/firmware.elf
Calculating size .pioenvs/nodemcu/firmware.elf
text data bss dec hex filename
223500 2408 29536 255444 3e5d4 .pioenvs/nodemcu/firmware.elf
Looking for upload port...
Auto-detected: /dev/cu.SLAB_USBtoUART
Uploading .pioenvs/nodemcu/firmware.bin
Uploading 230064 bytes from .pioenvs/nodemcu/firmware.bin to flash at 0x00000000
................................................................................ [ 35% ]
................................................................................ [ 71% ]
................................................................. [ 100% ]
=============================== [test/*] Testing... (3/3) ===============================
If you don't see any output for the first 10 secs, please reset board (press reset button)
test/test_main.cpp:41:test_led_state_high [PASSED]
test/test_main.cpp:43:test_led_state_low [PASSED]
test/test_main.cpp:41:test_led_state_high [PASSED]
test/test_main.cpp:43:test_led_state_low [PASSED]
test/test_main.cpp:41:test_led_state_high [PASSED]
test/test_main.cpp:43:test_led_state_low [PASSED]
test/test_main.cpp:41:test_led_state_high [PASSED]
test/test_main.cpp:43:test_led_state_low [PASSED]
-----------------------
11 Tests 1 Failures 0 Ignored
===================================== [TEST SUMMARY] =====================================
test/*/env:nodemcu [PASSED]
================================ [PASSED] Took 38.15 seconds ================================