Mini-Module FT2232H¶
The FT2232H Mini Module is a USB to dual channel serial/MPSSE/FIFO interface converter module based on the FT2232H USB Hi-Speed IC. The FT2232H handles all the USB signalling and protocol handling. The module provides access to device I/O interfaces via 2 double row 0.1” pitch male connectors. The module is ideal for development purposes to quickly prove functionality of adding USB to a target design. Vendor information…
Configuration¶
You can configure debugging tool using debug_tool option in “platformio.ini” (Project Configuration File):
[env:myenv]
platform = ...
board = ...
debug_tool = minimodule
If you would like to use this tool for firmware uploading, please change upload protocol:
[env:myenv]
platform = ...
board = ...
debug_tool = minimodule
upload_protocol = minimodule
More options:
Drivers¶
- Windows:
See https://community.platformio.org/t/esp32-pio-unified-debugger/4541/20
- Mac:
macOS contains default FTDIUSBSerialDriver driver which conflicts with debug tools which are based on this chip. FTDI Chip company recommends removing this default driver from a system. Everything should work after system rebooting. See detailed instruction in official application note (Page 16, Section 4: Uninstalling FTDI Drivers on OS X) AN134: FTDI Drivers Installation guide for MAC OS X
- Linux:
Please install “udev” rules 99-platformio-udev.rules. If you already installed them before, please check that your rules are up-to-date or repeat steps.
Wiring Connections¶
FT2232H Mini-Module Pin |
Board JTAG Pin |
Description |
|---|---|---|
GND [CN2-2] |
GND |
Digital ground |
AD0 [CN2-7] |
TCK |
JTAG Return Test ClocK |
AD1 [CN2-10] |
TDI |
Test Data In |
AD2 [CN2-9] |
TDO |
Test Data Out |
AD3 [CN2-12] |
TMS |
Test Mode State |
AC2 [CN2-20] |
RESET |
Connect this pin to the (active low) reset input of the target CPU |
You will also need to connect Vbus [CN3-1] to Vcc [CN3-3] of FT2232H Mini-Module to power the FTDI chip. See FT2232H Mini-Module Datasheet
Platforms¶
Name |
Description |
|---|---|
Espressif Systems is a privately held fabless semiconductor company. They provide wireless communications and Wi-Fi chips which are widely used in mobile devices and the Internet of Things applications. |
Frameworks¶
Name |
Description |
|---|---|
Arduino Wiring-based Framework allows writing cross-platform software to control devices attached to a wide range of Arduino boards to create all kinds of creative coding, interactive objects, spaces or physical experiences. |
|
Espressif IoT Development Framework. Official development framework for ESP32. |
|
Simba is an RTOS and build framework. It aims to make embedded programming easy and portable. |
Boards¶
Note
For more detailed board information please scroll tables below by horizontal.
Name |
Platform |
Debug |
MCU |
Frequency |
Flash |
RAM |
|---|---|---|---|---|---|---|
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
On-board |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |
||
External |
ESP32 |
240MHz |
4MB |
320KB |