platformio device ¶

platformio device list ¶

Usage ¶

platformio device list [OPTIONS]
pio device list [OPTIONS]

Description ¶

List available devices. Default is set to --serial and all available Serial Ports will be shown.

Options ¶

--serial¶

List available Serial Ports, default.

--logical¶

List available logical devices.

--mdns¶

List multicast DNS services.

--json-output¶

Return the output in JSON format.

Examples ¶

Unix OS

$ platformio device list
/dev/cu.SLAB_USBtoUART
----------
Hardware ID: USB VID:PID=10c4:ea60 SNR=0001
Description: CP2102 USB to UART Bridge Controller

/dev/cu.uart-1CFF4676258F4543
----------
Hardware ID: USB VID:PID=451:f432 SNR=1CFF4676258F4543
Description: Texas Instruments MSP-FET430UIF

Windows OS

$ platformio device list
COM4
----------
Hardware ID: USB VID:PID=0451:F432
Description: MSP430 Application UART (COM4)

COM3
----------
Hardware ID: USB VID:PID=10C4:EA60 SNR=0001
Description: Silicon Labs CP210x USB to UART Bridge (COM3)

List multicast DNS services and logical devices

$ platformio device list --mdns --logical
Multicast DNS Services
======================

PlatformIO._bttremote._tcp.local.
------------------------------
Type: _bttremote._tcp.local.
IP: ...
Port: 62941
Properties: ...

Time for PlatformIO._adisk._tcp.local.
---------------------------------
Type: _adisk._tcp.local.
IP: 192.168.0.1
Port: 9
Properties: ...

PlatformIO._ssh._tcp.local.
------------------------
Type: _ssh._tcp.local.
IP: ...
Port: 22

PlatformIO._sftp-ssh._tcp.local.
-----------------------------
Type: _sftp-ssh._tcp.local.
IP: ...
Port: 22


Logical Devices
===============
/
-
Name:

/Volumes/PIO
-------------
Name: PIO

/Volumes/PLUS
--------------
Name: PLUS

platformio device monitor ¶

Usage ¶

platformio device monitor [OPTIONS]

This is a console application that provides a small terminal application. It is based on Miniterm and itself does not implement any terminal features such as VT102 compatibility. However it inherits these features from the terminal it is run. For example on GNU/Linux running from an xterm it will support the escape sequences of the xterm. On Windows the typical console window is dumb and does not support any escapes. When ANSI.sys is loaded it supports some escapes.

Miniterm supports RFC 2217 remote serial ports and raw sockets using URL Handlers such as rfc2217://<host>:<port> respectively socket://<host>:<port> as port argument when invoking.

To control monitor please use these “hot keys”:

Ctrl+C Quit
Ctrl+T Menu
Ctrl+T followed by Ctrl+H Help

Options ¶

-p, --port¶

Port, a number or a device name, or valid URL Handlers.

Could be customized in “platformio.ini” (Project Configuration File) using monitor_port option.

URL Handlers

-b, --baud¶

Set baud rate, default 9600.

Could be customized in “platformio.ini” (Project Configuration File) using monitor_speed option.

--parity¶

Set parity (None, Even, Odd, Space, Mark), one of [N, E, O, S, M], default N

--rtscts¶

Enable RTS/CTS flow control, default Off

--xonxoff¶

Enable software flow control, default Off

--rts¶

Set initial RTS line state (0 or 1).

Could be customized in “platformio.ini” (Project Configuration File) using monitor_rts option.

--dtr¶

Set initial DTR line state (0 or 1).

Could be customized in “platformio.ini” (Project Configuration File) using monitor_dtr option.

--echo¶

Enable local echo, default Off

--encoding¶

Set the encoding for the serial port (e.g. hexlify, Latin1, UTF-8), default UTF-8.

-f, --filter¶

Add text transformation. Available filters:

colorize Apply different colors for received and echo
debug Print what is sent and received
default Remove typical terminal control codes from input
direct Do-nothing: forward all data unchanged
nocontrol Remove all control codes, incl. CR+LF
printable Show decimal code for all non-ASCII characters and replace most control codes

--eol¶

End of line mode (CR, LF or CRLF), default CRLF

NEW: Available in Miniterm/PySerial 3.0

--raw¶

Do not apply any encodings/transformations

--exit-char¶

ASCII code of special character that is used to exit the application, default 3 (DEC, Ctrl+C).

For example, to use Ctrl+] run platformio device monitor --exit-char 29.

--menu-char¶

ASCII code of special character that is used to control miniterm (menu), default 20 (DEC)

---quiet¶

Diagnostics: suppress non-error messages, default Off

-d, --project-dir¶

Specify the path to project directory. By default, --project-dir is equal to current working directory (CWD).

-e, --environment¶

Process specified environments.

You can also specify which environments should be processed by default using env_default option from “platformio.ini” (Project Configuration File).

Examples ¶

Show available options for monitor

$ platformio device monitor --help
Usage: platformio device monitor [OPTIONS]

Options:
  -p, --port TEXT       Port, a number or a device name
  -b, --baud INTEGER    Set baud rate, default=9600
  --parity [N|E|O|S|M]  Set parity, default=N
  --rtscts              Enable RTS/CTS flow control, default=Off
  --xonxoff             Enable software flow control, default=Off
  --rts [0|1]           Set initial RTS line state, default=0
  --dtr [0|1]           Set initial DTR line state, default=0
  --echo                Enable local echo, default=Off
  --encoding TEXT       Set the encoding for the serial port (e.g. hexlify,
                        Latin1, UTF-8), default: UTF-8
  -f, --filter TEXT     Add text transformation
  --eol [CR|LF|CRLF]    End of line mode, default=CRLF
  --raw                 Do not apply any encodings/transformations
  --exit-char INTEGER   ASCII code of special character that is used to exit
                        the application, default=29 (DEC)
  --menu-char INTEGER   ASCII code of special character that is used to
                        control miniterm (menu), default=20 (DEC)
  --quiet               Diagnostics: suppress non-error messages, default=Off
  -h, --help            Show this message and exit.

Communicate with serial device and print help inside terminal

$ platformio device monitor

--- Available ports:
--- /dev/cu.Bluetooth-Incoming-Port n/a
--- /dev/cu.Bluetooth-Modem n/a
--- /dev/cu.SLAB_USBtoUART CP2102 USB to UART Bridge Controller
--- /dev/cu.obd2ecu-SPPDev n/a
Enter port name:/dev/cu.SLAB_USBtoUART
--- Miniterm on /dev/cu.SLAB_USBtoUART: 9600,8,N,1 ---
--- Quit: Ctrl+C  |  Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H ---
Hello PlatformIO!
---
--- Ctrl+]   Exit program
--- Ctrl+T   Menu escape key, followed by:
--- Menu keys:
---    Ctrl+T  Send the menu character itself to remote
---    Ctrl+]  Send the exit character itself to remote
---    Ctrl+I  Show info
---    Ctrl+U  Upload file (prompt will be shown)
--- Toggles:
---    Ctrl+R  RTS          Ctrl+E  local echo
---    Ctrl+D  DTR          Ctrl+B  BREAK
---    Ctrl+L  line feed    Ctrl+A  Cycle repr mode
---
--- Port settings (Ctrl+T followed by the following):
---    p          change port
---    7 8        set data bits
---    n e o s m  change parity (None, Even, Odd, Space, Mark)
---    1 2 3      set stop bits (1, 2, 1.5)
---    b          change baud rate
---    x X        disable/enable software flow control
---    r R        disable/enable hardware flow control
--- exit ---