Aceinna OpenIMU 300ZA

Hardware

Platform Aceinna IMU: Open-source, embedded development platform for Aceinna IMU hardware. Run custom algorithms and navigation code on Aceinna IMU/INS hardware.

Microcontroller

STM32F405RG

Frequency

120MHz

Flash

1MB

RAM

128KB

Vendor

Aceinna

Configuration

Please use OpenIMU300ZA ID for board option in “platformio.ini” (Project Configuration File):

[env:OpenIMU300ZA]
platform = aceinna_imu
board = OpenIMU300ZA

You can override default Aceinna OpenIMU 300ZA settings per build environment using board_*** option, where *** is a JSON object path from board manifest OpenIMU300ZA.json. For example, board_build.mcu, board_build.f_cpu, etc.

[env:OpenIMU300ZA]
platform = aceinna_imu
board = OpenIMU300ZA

; change microcontroller
board_build.mcu = stm32f405rg

; change MCU frequency
board_build.f_cpu = 120000000L

Uploading

Aceinna OpenIMU 300ZA supports the next uploading protocols:

  • blackmagic

  • stlink

  • jlink

Default protocol is stlink

You can change upload protocol using upload_protocol option:

[env:OpenIMU300ZA]
platform = aceinna_imu
board = OpenIMU300ZA

upload_protocol = stlink

Debugging

PIO Unified Debugger - “1-click” solution for debugging with a zero configuration.

Warning

You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions and configuration information.

You can switch between debugging Tools & Debug Probes using debug_tool option in “platformio.ini” (Project Configuration File).

Aceinna OpenIMU 300ZA does not have on-board debug probe and IS NOT READY for debugging. You will need to use/buy one of external probe listed below.

Compatible Tools

On-board

Default

Black Magic Probe

J-LINK

ST-LINK

Yes