Platform ST STM32: The STM32 family of 32-bit Flash MCUs based on the ARM Cortex-M processor is designed to offer new degrees of freedom to MCU users. It offers a 32-bit product range that combines very high performance, real-time capabilities, digital signal processing, and low-power, low-voltage operation, while maintaining full integration and ease of development.
Microcontroller |
STM32F303VCT6 |
Frequency |
72MHz |
Flash |
256KB |
RAM |
48KB |
Vendor |
Please use disco_f303vc ID for board option in “platformio.ini” (Project Configuration File):
[env:disco_f303vc]
platform = ststm32
board = disco_f303vc
You can override default ST STM32F3DISCOVERY settings per build environment using
board_*** option, where *** is a JSON object path from
board manifest disco_f303vc.json. For example,
board_build.mcu, board_build.f_cpu, etc.
[env:disco_f303vc]
platform = ststm32
board = disco_f303vc
; change microcontroller
board_build.mcu = stm32f303vct6
; change MCU frequency
board_build.f_cpu = 72000000L
ST STM32F3DISCOVERY supports the next uploading protocols:
blackmagic
jlink
mbed
stlink
Default protocol is mbed
You can change upload protocol using upload_protocol option:
[env:disco_f303vc]
platform = ststm32
board = disco_f303vc
upload_protocol = mbed
PIO Unified Debugger - “1-click” solution for debugging with a zero configuration.
Warning
You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions and configuration information.
You can switch between debugging Tools & Debug Probes using debug_tool option in “platformio.ini” (Project Configuration File).
ST STM32F3DISCOVERY has on-board debug probe and IS READY for debugging. You don’t need to use/buy external debug probe.
Compatible Tools |
On-board |
Default |
|---|---|---|
Yes |
Yes |
Name |
Description |
|---|---|
The ARM Cortex Microcontroller Software Interface Standard (CMSIS) is a vendor-independent hardware abstraction layer for the Cortex-M processor series and specifies debugger interfaces. The CMSIS enables consistent and simple software interfaces to the processor for interface peripherals, real-time operating systems, and middleware. It simplifies software re-use, reducing the learning curve for new microcontroller developers and cutting the time-to-market for devices. |
|
The libOpenCM3 framework aims to create a free/libre/open-source firmware library for various ARM Cortex-M0(+)/M3/M4 microcontrollers, including ST STM32, Ti Tiva and Stellaris, NXP LPC 11xx, 13xx, 15xx, 17xx parts, Atmel SAM3, Energy Micro EFM32 and others. |
|
The mbed framework The mbed SDK has been designed to provide enough hardware abstraction to be intuitive and concise, yet powerful enough to build complex projects. It is built on the low-level ARM CMSIS APIs, allowing you to code down to the metal if needed. In addition to RTOS, USB and Networking libraries, a cookbook of hundreds of reusable peripheral and module libraries have been built on top of the SDK by the mbed Developer Community. |
|
The ST Standard Peripheral Library provides a set of functions for handling the peripherals on the STM32 Cortex-M3 family. The idea is to save the user (the new user, in particular) having to deal directly with the registers. |
|
STM32Cube embedded software libraries, including: The HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls; The Low-Layer (LL) APIs, a light-weight, optimized, expert oriented set of APIs designed for both performance and runtime efficiency. |