ASR Microelectronics ASR605x¶

LoRaWAN¶

LoRaWAN protocol can be configured in “platformio.ini” (Project Configuration File) using the following syntax board_build.arduino.lorawan.* where * is an option from the following list:

Option	Description	Possible values	Default
region	Region definition	AS923, AU915, CN470, CN779, EU433, EU868, KR920, IN865, US915, US915_HYBRID	AS923
class	Device class	CLASS_A, CLASS_C	CLASS_A
netmode	Activation method	OTAA, ABP	OTAA
adr	Adaptive Data Rate	ON, OFF	ON
uplinkmode	Uplink confirmed/unconfirmed messages	CONFIRMED, UNCONFIRMED	CONFIRMED
net_reserve	Don’t rejoin after reset	ON, OFF	OFF
at_support	AT commands support	ON, OFF	ON
rgb	RGB light for LoRaWAN status	ACTIVE, DEACTIVE	ACTIVE
debug_level	Print LoRaWAN relevant messages print to serial port	NONE, FREQ (Sending/receiving frequency), FREQ_AND_DIO (Sending/receiving frequency and DIO pin interrupt information)	NONE

Example

[env:cubecell_board]
platform = asrmicro650x
framework = arduino
board = cubecell_board
board_build.arduino.lorawan.region = EU433
board_build.arduino.lorawan.adr = OFF
board_build.arduino.lorawan.debug_level = FREQ_AND_DIO

More information about LoRaWAN configuration can be found in the official CubeCell documentation.

Stable¶

; Latest stable version
[env:latest_stable]
platform = asrmicro650x
board = ...

; Custom stable version
[env:custom_stable]
platform = asrmicro650x@x.y.z
board = ...

Upstream¶

[env:upstream_develop]
platform = https://github.com/HelTecAutomation/platform-asrmicro650x.git
board = ...

Heltec¶