framework = pulp-os
PULP is a silicon-proven Parallel Ultra Low Power platform targeting high energy efficiencies. The platform is organized in clusters of RISC-V cores that share a tightly-coupled data memory
Name |
Description |
|---|---|
GreenWaves GAP8 IoT application processor enables the cost-effective development, deployment and autonomous operation of intelligent sensing devices that capture, analyze, classify and act on the fusion of rich data sources such as images, sounds or vibrations. |
Debugging - “1-click” solution for debugging with a zero configuration.
Supported debugging tools are listed in “Debug” column. For more detailed information, please scroll table by horizontal. You can switch between debugging Tools & Debug Probes using debug_tool option in “platformio.ini” (Project Configuration File).
Warning
You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions.
Boards listed below have on-board debug probe and ARE READY for debugging! You do not need to use/buy external debug probe.
Name |
Platform |
MCU |
Frequency |
Flash |
RAM |
|---|---|---|---|---|---|
GAP8 |
250MHz |
64MB |
8MB |
Note
You can list pre-configured boards by pio boards command
For more detailed board information please scroll the tables below by horizontally.
Name |
Platform |
Debug |
MCU |
Frequency |
Flash |
RAM |
|---|---|---|---|---|---|---|
On-board |
GAP8 |
250MHz |
64MB |
8MB |