`upload_command`¶

Type: String | Singleline: Yes

Override default Development Platforms upload command with a custom command. You can pass a full upload command with arguments and options or mix with upload_flags.

In order to use upload_command, upload_protocol = custom must be specified.

Default upload commands are declared in build/main.py script file of Development Platforms. See a list with open source Development Platforms => https://github.com/topics/platformio-platform

Note

Please note that you can use build variables in upload_command, such as PlatformIO project folders and other runtime configuration. A list with build variables are available by running pio run --target envdump command.

Examples

Override default upload command but handle pre-uploading actions (looking for serial port, extra image preparation, etc.). Normally, the pre-configured upload options will be stored in $UPLOADERFLAGS build variable. A classic default upload command for Development Platforms may look as some-flash-bin-tool $UPLOADERFLAGS $SOURCE, where $SOURCE will be replaced by a real program/firmware binary.

${platformio.packages_dir} template points to packages_dir.
```
[env:program_via_AVR_ISP]
platform = atmelavr
framework = arduino
board = uno
upload_protocol = custom
upload_flags =
    -C
    ${platformio.packages_dir}/tool-avrdude/avrdude.conf
    -p
    atmega328p
    -P
    $UPLOAD_PORT
    -b
    115200
    -c
    stk500v1
upload_command = avrdude $UPLOAD_FLAGS -U flash:w:$SOURCE:i
```

Override default upload command and skip pre-uploading actions.

[env:program_via_usbasp]
platform = atmelavr
framework = arduino
board = uno
upload_protocol = custom
upload_flags =
    -C
    ${platformio.packages_dir}/tool-avrdude/avrdude.conf
    -p
    atmega328p
    -Pusb
    -c
    stk500v1
upload_command = avrdude $UPLOAD_FLAGS -U flash:w:$SOURCE:i


; Use ST-util for flashing
; https://github.com/texane/stlink

[env:custom_st_flash]
platform = ststm32
framework = stm32cube
board = bluepill_f103c6
upload_protocol = custom
upload_command = ${platformio.packages_dir}/tool-stlink/st-flash write $SOURCE 0x8000000

upload_command¶

`upload_command`¶