.. _topics-downloader-middleware: ===================== Downloader Middleware ===================== The downloader middleware is a framework of hooks into Scrapy's request/response processing. It's a light, low-level system for globally altering Scrapy's requests and responses. .. _topics-downloader-middleware-setting: Activating a downloader middleware ================================== To activate a downloader middleware component, add it to the :setting:`DOWNLOADER_MIDDLEWARES` setting, which is a dict whose keys are the middleware class paths and their values are the middleware orders. Here's an example:: DOWNLOADER_MIDDLEWARES = { 'myproject.middlewares.CustomDownloaderMiddleware': 543, } The :setting:`DOWNLOADER_MIDDLEWARES` setting is merged with the :setting:`DOWNLOADER_MIDDLEWARES_BASE` setting defined in Scrapy (and not meant to be overridden) and then sorted by order to get the final sorted list of enabled middlewares: the first middleware is the one closer to the engine and the last is the one closer to the downloader. In other words, the :meth:`~scrapy.downloadermiddlewares.DownloaderMiddleware.process_request` method of each middleware will be invoked in increasing middleware order (100, 200, 300, ...) and the :meth:`~scrapy.downloadermiddlewares.DownloaderMiddleware.process_response` method of each middleware will be invoked in decreasing order. To decide which order to assign to your middleware see the :setting:`DOWNLOADER_MIDDLEWARES_BASE` setting and pick a value according to where you want to insert the middleware. The order does matter because each middleware performs a different action and your middleware could depend on some previous (or subsequent) middleware being applied. If you want to disable a built-in middleware (the ones defined in :setting:`DOWNLOADER_MIDDLEWARES_BASE` and enabled by default) you must define it in your project's :setting:`DOWNLOADER_MIDDLEWARES` setting and assign ``None`` as its value. For example, if you want to disable the user-agent middleware:: DOWNLOADER_MIDDLEWARES = { 'myproject.middlewares.CustomDownloaderMiddleware': 543, 'scrapy.downloadermiddlewares.useragent.UserAgentMiddleware': None, } Finally, keep in mind that some middlewares may need to be enabled through a particular setting. See each middleware documentation for more info. .. _topics-downloader-middleware-custom: Writing your own downloader middleware ====================================== Each downloader middleware is a Python class that defines one or more of the methods defined below. The main entry point is the ``from_crawler`` class method, which receives a :class:`~scrapy.crawler.Crawler` instance. The :class:`~scrapy.crawler.Crawler` object gives you access, for example, to the :ref:`settings `. .. module:: scrapy.downloadermiddlewares .. class:: DownloaderMiddleware .. note:: Any of the downloader middleware methods may also return a deferred. .. method:: process_request(request, spider) This method is called for each request that goes through the download middleware. :meth:`process_request` should either: return ``None``, return a :class:`~scrapy.http.Response` object, return a :class:`~scrapy.http.Request` object, or raise :exc:`~scrapy.exceptions.IgnoreRequest`. If it returns ``None``, Scrapy will continue processing this request, executing all other middlewares until, finally, the appropriate downloader handler is called the request performed (and its response downloaded). If it returns a :class:`~scrapy.http.Response` object, Scrapy won't bother calling *any* other :meth:`process_request` or :meth:`process_exception` methods, or the appropriate download function; it'll return that response. The :meth:`process_response` methods of installed middleware is always called on every response. If it returns a :class:`~scrapy.http.Request` object, Scrapy will stop calling process_request methods and reschedule the returned request. Once the newly returned request is performed, the appropriate middleware chain will be called on the downloaded response. If it raises an :exc:`~scrapy.exceptions.IgnoreRequest` exception, the :meth:`process_exception` methods of installed downloader middleware will be called. If none of them handle the exception, the errback function of the request (``Request.errback``) is called. If no code handles the raised exception, it is ignored and not logged (unlike other exceptions). :param request: the request being processed :type request: :class:`~scrapy.http.Request` object :param spider: the spider for which this request is intended :type spider: :class:`~scrapy.spiders.Spider` object .. method:: process_response(request, response, spider) :meth:`process_response` should either: return a :class:`~scrapy.http.Response` object, return a :class:`~scrapy.http.Request` object or raise a :exc:`~scrapy.exceptions.IgnoreRequest` exception. If it returns a :class:`~scrapy.http.Response` (it could be the same given response, or a brand-new one), that response will continue to be processed with the :meth:`process_response` of the next middleware in the chain. If it returns a :class:`~scrapy.http.Request` object, the middleware chain is halted and the returned request is rescheduled to be downloaded in the future. This is the same behavior as if a request is returned from :meth:`process_request`. If it raises an :exc:`~scrapy.exceptions.IgnoreRequest` exception, the errback function of the request (``Request.errback``) is called. If no code handles the raised exception, it is ignored and not logged (unlike other exceptions). :param request: the request that originated the response :type request: is a :class:`~scrapy.http.Request` object :param response: the response being processed :type response: :class:`~scrapy.http.Response` object :param spider: the spider for which this response is intended :type spider: :class:`~scrapy.spiders.Spider` object .. method:: process_exception(request, exception, spider) Scrapy calls :meth:`process_exception` when a download handler or a :meth:`process_request` (from a downloader middleware) raises an exception (including an :exc:`~scrapy.exceptions.IgnoreRequest` exception) :meth:`process_exception` should return: either ``None``, a :class:`~scrapy.http.Response` object, or a :class:`~scrapy.http.Request` object. If it returns ``None``, Scrapy will continue processing this exception, executing any other :meth:`process_exception` methods of installed middleware, until no middleware is left and the default exception handling kicks in. If it returns a :class:`~scrapy.http.Response` object, the :meth:`process_response` method chain of installed middleware is started, and Scrapy won't bother calling any other :meth:`process_exception` methods of middleware. If it returns a :class:`~scrapy.http.Request` object, the returned request is rescheduled to be downloaded in the future. This stops the execution of :meth:`process_exception` methods of the middleware the same as returning a response would. :param request: the request that generated the exception :type request: is a :class:`~scrapy.http.Request` object :param exception: the raised exception :type exception: an ``Exception`` object :param spider: the spider for which this request is intended :type spider: :class:`~scrapy.spiders.Spider` object .. method:: from_crawler(cls, crawler) If present, this classmethod is called to create a middleware instance from a :class:`~scrapy.crawler.Crawler`. It must return a new instance of the middleware. Crawler object provides access to all Scrapy core components like settings and signals; it is a way for middleware to access them and hook its functionality into Scrapy. :param crawler: crawler that uses this middleware :type crawler: :class:`~scrapy.crawler.Crawler` object .. _topics-downloader-middleware-ref: Built-in downloader middleware reference ======================================== This page describes all downloader middleware components that come with Scrapy. For information on how to use them and how to write your own downloader middleware, see the :ref:`downloader middleware usage guide `. For a list of the components enabled by default (and their orders) see the :setting:`DOWNLOADER_MIDDLEWARES_BASE` setting. .. _cookies-mw: CookiesMiddleware ----------------- .. module:: scrapy.downloadermiddlewares.cookies :synopsis: Cookies Downloader Middleware .. class:: CookiesMiddleware This middleware enables working with sites that require cookies, such as those that use sessions. It keeps track of cookies sent by web servers, and sends them back on subsequent requests (from that spider), just like web browsers do. .. caution:: When non-UTF8 encoded byte sequences are passed to a :class:`~scrapy.http.Request`, the ``CookiesMiddleware`` will log a warning. Refer to :ref:`topics-logging-advanced-customization` to customize the logging behaviour. .. caution:: Cookies set via the ``Cookie`` header are not considered by the :ref:`cookies-mw`. If you need to set cookies for a request, use the :class:`Request.cookies ` parameter. This is a known current limitation that is being worked on. The following settings can be used to configure the cookie middleware: * :setting:`COOKIES_ENABLED` * :setting:`COOKIES_DEBUG` .. reqmeta:: cookiejar Multiple cookie sessions per spider ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ There is support for keeping multiple cookie sessions per spider by using the :reqmeta:`cookiejar` Request meta key. By default it uses a single cookie jar (session), but you can pass an identifier to use different ones. For example:: for i, url in enumerate(urls): yield scrapy.Request(url, meta={'cookiejar': i}, callback=self.parse_page) Keep in mind that the :reqmeta:`cookiejar` meta key is not "sticky". You need to keep passing it along on subsequent requests. For example:: def parse_page(self, response): # do some processing return scrapy.Request("http://www.example.com/otherpage", meta={'cookiejar': response.meta['cookiejar']}, callback=self.parse_other_page) .. setting:: COOKIES_ENABLED COOKIES_ENABLED ~~~~~~~~~~~~~~~ Default: ``True`` Whether to enable the cookies middleware. If disabled, no cookies will be sent to web servers. Notice that despite the value of :setting:`COOKIES_ENABLED` setting if ``Request.``:reqmeta:`meta['dont_merge_cookies'] ` evaluates to ``True`` the request cookies will **not** be sent to the web server and received cookies in :class:`~scrapy.http.Response` will **not** be merged with the existing cookies. For more detailed information see the ``cookies`` parameter in :class:`~scrapy.http.Request`. .. setting:: COOKIES_DEBUG COOKIES_DEBUG ~~~~~~~~~~~~~ Default: ``False`` If enabled, Scrapy will log all cookies sent in requests (i.e. ``Cookie`` header) and all cookies received in responses (i.e. ``Set-Cookie`` header). Here's an example of a log with :setting:`COOKIES_DEBUG` enabled:: 2011-04-06 14:35:10-0300 [scrapy.core.engine] INFO: Spider opened 2011-04-06 14:35:10-0300 [scrapy.downloadermiddlewares.cookies] DEBUG: Sending cookies to: Cookie: clientlanguage_nl=en_EN 2011-04-06 14:35:14-0300 [scrapy.downloadermiddlewares.cookies] DEBUG: Received cookies from: <200 http://www.diningcity.com/netherlands/index.html> Set-Cookie: JSESSIONID=B~FA4DC0C496C8762AE4F1A620EAB34F38; Path=/ Set-Cookie: ip_isocode=US Set-Cookie: clientlanguage_nl=en_EN; Expires=Thu, 07-Apr-2011 21:21:34 GMT; Path=/ 2011-04-06 14:49:50-0300 [scrapy.core.engine] DEBUG: Crawled (200) (referer: None) [...] DefaultHeadersMiddleware ------------------------ .. module:: scrapy.downloadermiddlewares.defaultheaders :synopsis: Default Headers Downloader Middleware .. class:: DefaultHeadersMiddleware This middleware sets all default requests headers specified in the :setting:`DEFAULT_REQUEST_HEADERS` setting. DownloadTimeoutMiddleware ------------------------- .. module:: scrapy.downloadermiddlewares.downloadtimeout :synopsis: Download timeout middleware .. class:: DownloadTimeoutMiddleware This middleware sets the download timeout for requests specified in the :setting:`DOWNLOAD_TIMEOUT` setting or :attr:`download_timeout` spider attribute. .. note:: You can also set download timeout per-request using :reqmeta:`download_timeout` Request.meta key; this is supported even when DownloadTimeoutMiddleware is disabled. HttpAuthMiddleware ------------------ .. module:: scrapy.downloadermiddlewares.httpauth :synopsis: HTTP Auth downloader middleware .. class:: HttpAuthMiddleware This middleware authenticates all requests generated from certain spiders using `Basic access authentication`_ (aka. HTTP auth). To enable HTTP authentication from certain spiders, set the ``http_user`` and ``http_pass`` attributes of those spiders. Example:: from scrapy.spiders import CrawlSpider class SomeIntranetSiteSpider(CrawlSpider): http_user = 'someuser' http_pass = 'somepass' name = 'intranet.example.com' # .. rest of the spider code omitted ... .. _Basic access authentication: https://en.wikipedia.org/wiki/Basic_access_authentication HttpCacheMiddleware ------------------- .. module:: scrapy.downloadermiddlewares.httpcache :synopsis: HTTP Cache downloader middleware .. class:: HttpCacheMiddleware This middleware provides low-level cache to all HTTP requests and responses. It has to be combined with a cache storage backend as well as a cache policy. Scrapy ships with three HTTP cache storage backends: * :ref:`httpcache-storage-fs` * :ref:`httpcache-storage-dbm` You can change the HTTP cache storage backend with the :setting:`HTTPCACHE_STORAGE` setting. Or you can also :ref:`implement your own storage backend. ` Scrapy ships with two HTTP cache policies: * :ref:`httpcache-policy-rfc2616` * :ref:`httpcache-policy-dummy` You can change the HTTP cache policy with the :setting:`HTTPCACHE_POLICY` setting. Or you can also implement your own policy. .. reqmeta:: dont_cache You can also avoid caching a response on every policy using :reqmeta:`dont_cache` meta key equals ``True``. .. module:: scrapy.extensions.httpcache :noindex: .. _httpcache-policy-dummy: Dummy policy (default) ~~~~~~~~~~~~~~~~~~~~~~ .. class:: DummyPolicy This policy has no awareness of any HTTP Cache-Control directives. Every request and its corresponding response are cached. When the same request is seen again, the response is returned without transferring anything from the Internet. The Dummy policy is useful for testing spiders faster (without having to wait for downloads every time) and for trying your spider offline, when an Internet connection is not available. The goal is to be able to "replay" a spider run *exactly as it ran before*. .. _httpcache-policy-rfc2616: RFC2616 policy ~~~~~~~~~~~~~~ .. class:: RFC2616Policy This policy provides a RFC2616 compliant HTTP cache, i.e. with HTTP Cache-Control awareness, aimed at production and used in continuous runs to avoid downloading unmodified data (to save bandwidth and speed up crawls). What is implemented: * Do not attempt to store responses/requests with ``no-store`` cache-control directive set * Do not serve responses from cache if ``no-cache`` cache-control directive is set even for fresh responses * Compute freshness lifetime from ``max-age`` cache-control directive * Compute freshness lifetime from ``Expires`` response header * Compute freshness lifetime from ``Last-Modified`` response header (heuristic used by Firefox) * Compute current age from ``Age`` response header * Compute current age from ``Date`` header * Revalidate stale responses based on ``Last-Modified`` response header * Revalidate stale responses based on ``ETag`` response header * Set ``Date`` header for any received response missing it * Support ``max-stale`` cache-control directive in requests This allows spiders to be configured with the full RFC2616 cache policy, but avoid revalidation on a request-by-request basis, while remaining conformant with the HTTP spec. Example: Add ``Cache-Control: max-stale=600`` to Request headers to accept responses that have exceeded their expiration time by no more than 600 seconds. See also: RFC2616, 14.9.3 What is missing: * ``Pragma: no-cache`` support https://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.9.1 * ``Vary`` header support https://www.w3.org/Protocols/rfc2616/rfc2616-sec13.html#sec13.6 * Invalidation after updates or deletes https://www.w3.org/Protocols/rfc2616/rfc2616-sec13.html#sec13.10 * ... probably others .. .. _httpcache-storage-fs: Filesystem storage backend (default) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. class:: FilesystemCacheStorage File system storage backend is available for the HTTP cache middleware. Each request/response pair is stored in a different directory containing the following files: * ``request_body`` - the plain request body * ``request_headers`` - the request headers (in raw HTTP format) * ``response_body`` - the plain response body * ``response_headers`` - the request headers (in raw HTTP format) * ``meta`` - some metadata of this cache resource in Python ``repr()`` format (grep-friendly format) * ``pickled_meta`` - the same metadata in ``meta`` but pickled for more efficient deserialization The directory name is made from the request fingerprint (see ``scrapy.utils.request.fingerprint``), and one level of subdirectories is used to avoid creating too many files into the same directory (which is inefficient in many file systems). An example directory could be:: /path/to/cache/dir/example.com/72/72811f648e718090f041317756c03adb0ada46c7 .. _httpcache-storage-dbm: DBM storage backend ~~~~~~~~~~~~~~~~~~~ .. class:: DbmCacheStorage A DBM_ storage backend is also available for the HTTP cache middleware. By default, it uses the :mod:`dbm`, but you can change it with the :setting:`HTTPCACHE_DBM_MODULE` setting. .. _httpcache-storage-custom: Writing your own storage backend ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ You can implement a cache storage backend by creating a Python class that defines the methods described below. .. module:: scrapy.extensions.httpcache .. class:: CacheStorage .. method:: open_spider(spider) This method gets called after a spider has been opened for crawling. It handles the :signal:`open_spider ` signal. :param spider: the spider which has been opened :type spider: :class:`~scrapy.spiders.Spider` object .. method:: close_spider(spider) This method gets called after a spider has been closed. It handles the :signal:`close_spider ` signal. :param spider: the spider which has been closed :type spider: :class:`~scrapy.spiders.Spider` object .. method:: retrieve_response(spider, request) Return response if present in cache, or ``None`` otherwise. :param spider: the spider which generated the request :type spider: :class:`~scrapy.spiders.Spider` object :param request: the request to find cached response for :type request: :class:`~scrapy.http.Request` object .. method:: store_response(spider, request, response) Store the given response in the cache. :param spider: the spider for which the response is intended :type spider: :class:`~scrapy.spiders.Spider` object :param request: the corresponding request the spider generated :type request: :class:`~scrapy.http.Request` object :param response: the response to store in the cache :type response: :class:`~scrapy.http.Response` object In order to use your storage backend, set: * :setting:`HTTPCACHE_STORAGE` to the Python import path of your custom storage class. HTTPCache middleware settings ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The :class:`HttpCacheMiddleware` can be configured through the following settings: .. setting:: HTTPCACHE_ENABLED HTTPCACHE_ENABLED ^^^^^^^^^^^^^^^^^ Default: ``False`` Whether the HTTP cache will be enabled. .. setting:: HTTPCACHE_EXPIRATION_SECS HTTPCACHE_EXPIRATION_SECS ^^^^^^^^^^^^^^^^^^^^^^^^^ Default: ``0`` Expiration time for cached requests, in seconds. Cached requests older than this time will be re-downloaded. If zero, cached requests will never expire. .. setting:: HTTPCACHE_DIR HTTPCACHE_DIR ^^^^^^^^^^^^^ Default: ``'httpcache'`` The directory to use for storing the (low-level) HTTP cache. If empty, the HTTP cache will be disabled. If a relative path is given, is taken relative to the project data dir. For more info see: :ref:`topics-project-structure`. .. setting:: HTTPCACHE_IGNORE_HTTP_CODES HTTPCACHE_IGNORE_HTTP_CODES ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: ``[]`` Don't cache response with these HTTP codes. .. setting:: HTTPCACHE_IGNORE_MISSING HTTPCACHE_IGNORE_MISSING ^^^^^^^^^^^^^^^^^^^^^^^^ Default: ``False`` If enabled, requests not found in the cache will be ignored instead of downloaded. .. setting:: HTTPCACHE_IGNORE_SCHEMES HTTPCACHE_IGNORE_SCHEMES ^^^^^^^^^^^^^^^^^^^^^^^^ Default: ``['file']`` Don't cache responses with these URI schemes. .. setting:: HTTPCACHE_STORAGE HTTPCACHE_STORAGE ^^^^^^^^^^^^^^^^^ Default: ``'scrapy.extensions.httpcache.FilesystemCacheStorage'`` The class which implements the cache storage backend. .. setting:: HTTPCACHE_DBM_MODULE HTTPCACHE_DBM_MODULE ^^^^^^^^^^^^^^^^^^^^ Default: ``'dbm'`` The database module to use in the :ref:`DBM storage backend `. This setting is specific to the DBM backend. .. setting:: HTTPCACHE_POLICY HTTPCACHE_POLICY ^^^^^^^^^^^^^^^^ Default: ``'scrapy.extensions.httpcache.DummyPolicy'`` The class which implements the cache policy. .. setting:: HTTPCACHE_GZIP HTTPCACHE_GZIP ^^^^^^^^^^^^^^ Default: ``False`` If enabled, will compress all cached data with gzip. This setting is specific to the Filesystem backend. .. setting:: HTTPCACHE_ALWAYS_STORE HTTPCACHE_ALWAYS_STORE ^^^^^^^^^^^^^^^^^^^^^^ Default: ``False`` If enabled, will cache pages unconditionally. A spider may wish to have all responses available in the cache, for future use with ``Cache-Control: max-stale``, for instance. The DummyPolicy caches all responses but never revalidates them, and sometimes a more nuanced policy is desirable. This setting still respects ``Cache-Control: no-store`` directives in responses. If you don't want that, filter ``no-store`` out of the Cache-Control headers in responses you feed to the cache middleware. .. setting:: HTTPCACHE_IGNORE_RESPONSE_CACHE_CONTROLS HTTPCACHE_IGNORE_RESPONSE_CACHE_CONTROLS ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: ``[]`` List of Cache-Control directives in responses to be ignored. Sites often set "no-store", "no-cache", "must-revalidate", etc., but get upset at the traffic a spider can generate if it actually respects those directives. This allows to selectively ignore Cache-Control directives that are known to be unimportant for the sites being crawled. We assume that the spider will not issue Cache-Control directives in requests unless it actually needs them, so directives in requests are not filtered. HttpCompressionMiddleware ------------------------- .. module:: scrapy.downloadermiddlewares.httpcompression :synopsis: Http Compression Middleware .. class:: HttpCompressionMiddleware This middleware allows compressed (gzip, deflate) traffic to be sent/received from web sites. This middleware also supports decoding `brotli-compressed`_ as well as `zstd-compressed`_ responses, provided that `brotlipy`_ or `zstandard`_ is installed, respectively. .. _brotli-compressed: https://www.ietf.org/rfc/rfc7932.txt .. _brotlipy: https://pypi.org/project/brotlipy/ .. _zstd-compressed: https://www.ietf.org/rfc/rfc8478.txt .. _zstandard: https://pypi.org/project/zstandard/ HttpCompressionMiddleware Settings ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. setting:: COMPRESSION_ENABLED COMPRESSION_ENABLED ^^^^^^^^^^^^^^^^^^^ Default: ``True`` Whether the Compression middleware will be enabled. HttpProxyMiddleware ------------------- .. module:: scrapy.downloadermiddlewares.httpproxy :synopsis: Http Proxy Middleware .. reqmeta:: proxy .. class:: HttpProxyMiddleware This middleware sets the HTTP proxy to use for requests, by setting the ``proxy`` meta value for :class:`~scrapy.http.Request` objects. Like the Python standard library module :mod:`urllib.request`, it obeys the following environment variables: * ``http_proxy`` * ``https_proxy`` * ``no_proxy`` You can also set the meta key ``proxy`` per-request, to a value like ``http://some_proxy_server:port`` or ``http://username:password@some_proxy_server:port``. Keep in mind this value will take precedence over ``http_proxy``/``https_proxy`` environment variables, and it will also ignore ``no_proxy`` environment variable. RedirectMiddleware ------------------ .. module:: scrapy.downloadermiddlewares.redirect :synopsis: Redirection Middleware .. class:: RedirectMiddleware This middleware handles redirection of requests based on response status. .. reqmeta:: redirect_urls The urls which the request goes through (while being redirected) can be found in the ``redirect_urls`` :attr:`Request.meta ` key. .. reqmeta:: redirect_reasons The reason behind each redirect in :reqmeta:`redirect_urls` can be found in the ``redirect_reasons`` :attr:`Request.meta ` key. For example: ``[301, 302, 307, 'meta refresh']``. The format of a reason depends on the middleware that handled the corresponding redirect. For example, :class:`RedirectMiddleware` indicates the triggering response status code as an integer, while :class:`MetaRefreshMiddleware` always uses the ``'meta refresh'`` string as reason. The :class:`RedirectMiddleware` can be configured through the following settings (see the settings documentation for more info): * :setting:`REDIRECT_ENABLED` * :setting:`REDIRECT_MAX_TIMES` .. reqmeta:: dont_redirect If :attr:`Request.meta ` has ``dont_redirect`` key set to True, the request will be ignored by this middleware. If you want to handle some redirect status codes in your spider, you can specify these in the ``handle_httpstatus_list`` spider attribute. For example, if you want the redirect middleware to ignore 301 and 302 responses (and pass them through to your spider) you can do this:: class MySpider(CrawlSpider): handle_httpstatus_list = [301, 302] The ``handle_httpstatus_list`` key of :attr:`Request.meta ` can also be used to specify which response codes to allow on a per-request basis. You can also set the meta key ``handle_httpstatus_all`` to ``True`` if you want to allow any response code for a request. RedirectMiddleware settings ~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. setting:: REDIRECT_ENABLED REDIRECT_ENABLED ^^^^^^^^^^^^^^^^ Default: ``True`` Whether the Redirect middleware will be enabled. .. setting:: REDIRECT_MAX_TIMES REDIRECT_MAX_TIMES ^^^^^^^^^^^^^^^^^^ Default: ``20`` The maximum number of redirections that will be followed for a single request. After this maximum, the request's response is returned as is. MetaRefreshMiddleware --------------------- .. class:: MetaRefreshMiddleware This middleware handles redirection of requests based on meta-refresh html tag. The :class:`MetaRefreshMiddleware` can be configured through the following settings (see the settings documentation for more info): * :setting:`METAREFRESH_ENABLED` * :setting:`METAREFRESH_IGNORE_TAGS` * :setting:`METAREFRESH_MAXDELAY` This middleware obey :setting:`REDIRECT_MAX_TIMES` setting, :reqmeta:`dont_redirect`, :reqmeta:`redirect_urls` and :reqmeta:`redirect_reasons` request meta keys as described for :class:`RedirectMiddleware` MetaRefreshMiddleware settings ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. setting:: METAREFRESH_ENABLED METAREFRESH_ENABLED ^^^^^^^^^^^^^^^^^^^ Default: ``True`` Whether the Meta Refresh middleware will be enabled. .. setting:: METAREFRESH_IGNORE_TAGS METAREFRESH_IGNORE_TAGS ^^^^^^^^^^^^^^^^^^^^^^^ Default: ``[]`` Meta tags within these tags are ignored. .. versionchanged:: 2.0 The default value of :setting:`METAREFRESH_IGNORE_TAGS` changed from ``['script', 'noscript']`` to ``[]``. .. setting:: METAREFRESH_MAXDELAY METAREFRESH_MAXDELAY ^^^^^^^^^^^^^^^^^^^^ Default: ``100`` The maximum meta-refresh delay (in seconds) to follow the redirection. Some sites use meta-refresh for redirecting to a session expired page, so we restrict automatic redirection to the maximum delay. RetryMiddleware --------------- .. module:: scrapy.downloadermiddlewares.retry :synopsis: Retry Middleware .. class:: RetryMiddleware A middleware to retry failed requests that are potentially caused by temporary problems such as a connection timeout or HTTP 500 error. Failed pages are collected on the scraping process and rescheduled at the end, once the spider has finished crawling all regular (non failed) pages. The :class:`RetryMiddleware` can be configured through the following settings (see the settings documentation for more info): * :setting:`RETRY_ENABLED` * :setting:`RETRY_TIMES` * :setting:`RETRY_HTTP_CODES` .. reqmeta:: dont_retry If :attr:`Request.meta ` has ``dont_retry`` key set to True, the request will be ignored by this middleware. RetryMiddleware Settings ~~~~~~~~~~~~~~~~~~~~~~~~ .. setting:: RETRY_ENABLED RETRY_ENABLED ^^^^^^^^^^^^^ Default: ``True`` Whether the Retry middleware will be enabled. .. setting:: RETRY_TIMES RETRY_TIMES ^^^^^^^^^^^ Default: ``2`` Maximum number of times to retry, in addition to the first download. Maximum number of retries can also be specified per-request using :reqmeta:`max_retry_times` attribute of :attr:`Request.meta `. When initialized, the :reqmeta:`max_retry_times` meta key takes higher precedence over the :setting:`RETRY_TIMES` setting. .. setting:: RETRY_HTTP_CODES RETRY_HTTP_CODES ^^^^^^^^^^^^^^^^ Default: ``[500, 502, 503, 504, 522, 524, 408, 429]`` Which HTTP response codes to retry. Other errors (DNS lookup issues, connections lost, etc) are always retried. In some cases you may want to add 400 to :setting:`RETRY_HTTP_CODES` because it is a common code used to indicate server overload. It is not included by default because HTTP specs say so. .. _topics-dlmw-robots: RobotsTxtMiddleware ------------------- .. module:: scrapy.downloadermiddlewares.robotstxt :synopsis: robots.txt middleware .. class:: RobotsTxtMiddleware This middleware filters out requests forbidden by the robots.txt exclusion standard. To make sure Scrapy respects robots.txt make sure the middleware is enabled and the :setting:`ROBOTSTXT_OBEY` setting is enabled. The :setting:`ROBOTSTXT_USER_AGENT` setting can be used to specify the user agent string to use for matching in the robots.txt_ file. If it is ``None``, the User-Agent header you are sending with the request or the :setting:`USER_AGENT` setting (in that order) will be used for determining the user agent to use in the robots.txt_ file. This middleware has to be combined with a robots.txt_ parser. Scrapy ships with support for the following robots.txt_ parsers: * :ref:`Protego ` (default) * :ref:`RobotFileParser ` * :ref:`Reppy ` * :ref:`Robotexclusionrulesparser ` You can change the robots.txt_ parser with the :setting:`ROBOTSTXT_PARSER` setting. Or you can also :ref:`implement support for a new parser `. .. reqmeta:: dont_obey_robotstxt If :attr:`Request.meta ` has ``dont_obey_robotstxt`` key set to True the request will be ignored by this middleware even if :setting:`ROBOTSTXT_OBEY` is enabled. Parsers vary in several aspects: * Language of implementation * Supported specification * Support for wildcard matching * Usage of `length based rule `_: in particular for ``Allow`` and ``Disallow`` directives, where the most specific rule based on the length of the path trumps the less specific (shorter) rule Performance comparison of different parsers is available at `the following link `_. .. _protego-parser: Protego parser ~~~~~~~~~~~~~~ Based on `Protego `_: * implemented in Python * is compliant with `Google's Robots.txt Specification `_ * supports wildcard matching * uses the length based rule Scrapy uses this parser by default. .. _python-robotfileparser: RobotFileParser ~~~~~~~~~~~~~~~ Based on :class:`~urllib.robotparser.RobotFileParser`: * is Python's built-in robots.txt_ parser * is compliant with `Martijn Koster's 1996 draft specification `_ * lacks support for wildcard matching * doesn't use the length based rule It is faster than Protego and backward-compatible with versions of Scrapy before 1.8.0. In order to use this parser, set: * :setting:`ROBOTSTXT_PARSER` to ``scrapy.robotstxt.PythonRobotParser`` .. _reppy-parser: Reppy parser ~~~~~~~~~~~~ Based on `Reppy `_: * is a Python wrapper around `Robots Exclusion Protocol Parser for C++ `_ * is compliant with `Martijn Koster's 1996 draft specification `_ * supports wildcard matching * uses the length based rule Native implementation, provides better speed than Protego. In order to use this parser: * Install `Reppy `_ by running ``pip install reppy`` * Set :setting:`ROBOTSTXT_PARSER` setting to ``scrapy.robotstxt.ReppyRobotParser`` .. _rerp-parser: Robotexclusionrulesparser ~~~~~~~~~~~~~~~~~~~~~~~~~ Based on `Robotexclusionrulesparser `_: * implemented in Python * is compliant with `Martijn Koster's 1996 draft specification `_ * supports wildcard matching * doesn't use the length based rule In order to use this parser: * Install `Robotexclusionrulesparser `_ by running ``pip install robotexclusionrulesparser`` * Set :setting:`ROBOTSTXT_PARSER` setting to ``scrapy.robotstxt.RerpRobotParser`` .. _support-for-new-robots-parser: Implementing support for a new parser ------------------------------------- You can implement support for a new robots.txt_ parser by subclassing the abstract base class :class:`~scrapy.robotstxt.RobotParser` and implementing the methods described below. .. module:: scrapy.robotstxt :synopsis: robots.txt parser interface and implementations .. autoclass:: RobotParser :members: .. _robots.txt: https://www.robotstxt.org/ DownloaderStats --------------- .. module:: scrapy.downloadermiddlewares.stats :synopsis: Downloader Stats Middleware .. class:: DownloaderStats Middleware that stores stats of all requests, responses and exceptions that pass through it. To use this middleware you must enable the :setting:`DOWNLOADER_STATS` setting. UserAgentMiddleware ------------------- .. module:: scrapy.downloadermiddlewares.useragent :synopsis: User Agent Middleware .. class:: UserAgentMiddleware Middleware that allows spiders to override the default user agent. In order for a spider to override the default user agent, its ``user_agent`` attribute must be set. .. _ajaxcrawl-middleware: AjaxCrawlMiddleware ------------------- .. module:: scrapy.downloadermiddlewares.ajaxcrawl .. class:: AjaxCrawlMiddleware Middleware that finds 'AJAX crawlable' page variants based on meta-fragment html tag. See https://developers.google.com/search/docs/ajax-crawling/docs/getting-started for more info. .. note:: Scrapy finds 'AJAX crawlable' pages for URLs like ``'http://example.com/!#foo=bar'`` even without this middleware. AjaxCrawlMiddleware is necessary when URL doesn't contain ``'!#'``. This is often a case for 'index' or 'main' website pages. AjaxCrawlMiddleware Settings ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. setting:: AJAXCRAWL_ENABLED AJAXCRAWL_ENABLED ^^^^^^^^^^^^^^^^^ Default: ``False`` Whether the AjaxCrawlMiddleware will be enabled. You may want to enable it for :ref:`broad crawls `. HttpProxyMiddleware settings ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. setting:: HTTPPROXY_ENABLED .. setting:: HTTPPROXY_AUTH_ENCODING HTTPPROXY_ENABLED ^^^^^^^^^^^^^^^^^ Default: ``True`` Whether or not to enable the :class:`HttpProxyMiddleware`. HTTPPROXY_AUTH_ENCODING ^^^^^^^^^^^^^^^^^^^^^^^ Default: ``"latin-1"`` The default encoding for proxy authentication on :class:`HttpProxyMiddleware`. .. _DBM: https://en.wikipedia.org/wiki/Dbm