soco.core module

The core module contains the SoCo class that implements the main entry to the SoCo functionality

soco.core.only_on_master(function)[source]: Decorator that raises SoCoSlaveException on master call on slave.

class soco.core.SoCo(*args, **kwargs)[source]

A simple class for controlling a Sonos speaker.

For any given set of arguments to __init__, only one instance of this class may be created. Subsequent attempts to create an instance with the same arguments will return the previously created instance. This means that all SoCo instances created with the same ip address are in fact the same SoCo instance, reflecting the real world position.

Basic Methods

`play_from_queue`(index[, start])	Play a track from the queue by index.
`play`()	Play the currently selected track.
`play_uri`([uri, meta, title, start, force_radio])	Play a URI.
`pause`()	Pause the currently playing track.
`stop`()	Stop the currently playing track.
`end_direct_control_session`()	Ends all third-party controlled streaming sessions.
`seek`([position, track])	Seek to a given position.
`next`()	Go to the next track.
`previous`()	Go back to the previously played track.
`mute`	The speaker's mute state.
`volume`	The speaker's volume.
`play_mode`	The queue's play mode.
`shuffle`	The queue's shuffle option.
`repeat`	The queue's repeat option.
`cross_fade`	The speaker's cross fade state.
`ramp_to_volume`(volume[, ramp_type])	Smoothly change the volume.
`set_relative_volume`(relative_volume)	Adjust the volume up or down by a relative amount.
`get_current_track_info`()	Get information about the currently playing track.
`get_current_media_info`()	Get information about the currently playing media.
`get_speaker_info`([refresh, timeout])	Get information about the Sonos speaker.
`get_current_transport_info`()	Get the current playback state.

Queue Management

`get_queue`([start, max_items, full_album_art_uri])	Get information about the queue.
`queue_size`	Size of the queue.
`add_to_queue`(queueable_item[, position, as_next])	Add a queueable item to the queue.
`add_uri_to_queue`(uri[, position, as_next])	Add the URI to the queue.
`add_multiple_to_queue`(items[, container])	Add a sequence of items to the queue.
`remove_from_queue`(index)	Remove a track from the queue by index.
`clear_queue`()	Remove all tracks from the queue.

Group Management

`group`	The Zone Group of which this device is a member.
`partymode`()	Put all the speakers in the network in the same group, a.k.a Party Mode.
`join`(master)	Join this speaker to another "master" speaker.
`unjoin`()	Remove this speaker from a group.
`all_groups`	All available groups.
`all_zones`	All available zones.
`visible_zones`	All visible zones.

Player Identity and Settings

`player_name`	The speaker's name.
`uid`	A unique identifier.
`household_id`	A unique identifier for all players in a household.
`is_visible`	Is this zone visible?
`is_bridge`	Is this zone a bridge?
`is_coordinator`	Is this zone a group coordinator?
`is_soundbar`	Is this zone a soundbar (i.e.
`bass`	The speaker's bass EQ.
`treble`	The speaker's treble EQ.
`loudness`	The speaker's loudness compensation.
`balance`	The left/right balance for the speaker(s).
`night_mode`	The speaker's night mode.
`dialog_mode`	The speaker's dialog mode.
`supports_fixed_volume`	Whether the device supports fixed volume output.
`fixed_volume`	The device's fixed volume output setting.
`trueplay`	Whether Trueplay is enabled on this device.
`status_light`	The white Sonos status light between the mute button and the volume up button on the speaker.
`buttons_enabled`	Whether the control buttons on the device are enabled.

Playlists and Favorites

`get_sonos_playlists`(args, *kwargs)	Convenience method for calling `soco.music_library.get_music_library_information('sonos_playlists')`
`create_sonos_playlist`(title)	Create a new empty Sonos playlist.
`create_sonos_playlist_from_queue`(title)	Create a new Sonos playlist from the current queue.
`remove_sonos_playlist`(sonos_playlist)	Remove a Sonos playlist.
`add_item_to_sonos_playlist`(queueable_item, ...)	Adds a queueable item to a Sonos' playlist.
`reorder_sonos_playlist`(sonos_playlist, ...)	Reorder and/or Remove tracks in a Sonos playlist.
`clear_sonos_playlist`(sonos_playlist[, update_id])	Clear all tracks from a Sonos playlist.
`move_in_sonos_playlist`(sonos_playlist, ...)	Move a track to a new position within a Sonos Playlist.
`remove_from_sonos_playlist`(sonos_playlist, track)	Remove a track from a Sonos Playlist.
`get_sonos_playlist_by_attr`(attr_name, match)	Return the first Sonos Playlist DidlPlaylistContainer that matches the attribute specified.
`get_favorite_radio_shows`([start, max_items])	Get favorite radio shows from Sonos' Radio app.
`get_favorite_radio_stations`([start, max_items])	Get favorite radio stations from Sonos' Radio app.
`get_sonos_favorites`([start, max_items])	Get Sonos favorites.

Miscellaneous

`music_source`	The current music source (radio, TV, line-in, etc.).
`music_source_from_uri`(uri)	Determine a music source from a URI.
`is_playing_radio`	Is the speaker playing radio?
`is_playing_tv`	Is the playbar speaker input from TV?
`is_playing_line_in`	Is the speaker playing line-in?
`switch_to_line_in`([source])	Switch the speaker's input to line-in.
`switch_to_tv`()	Switch the playbar speaker's input to TV.
`available_actions`	The transport actions that are currently available on the speaker.
`set_sleep_timer`(sleep_time_seconds)	Sets the sleep timer.
`get_sleep_timer`()	Retrieves remaining sleep time, if any
`create_stereo_pair`(rh_slave_speaker)	Create a stereo pair.
`separate_stereo_pair`()	Separate a stereo pair.
`get_battery_info`([timeout])	Get battery information for a Sonos speaker.
`boot_seqnum`	The boot sequence number.

Warning

Properties on this object are not generally cached and may obtain information over the network, so may take longer than expected to set or return a value. It may be a good idea for you to cache the value in your own code.

Note

Since all methods/properties on this object will result in an UPnP request, they might result in an exception without it being mentioned in the Raises section.

In most cases, the exception will be a soco.exceptions.SoCoUPnPException (if the player returns an UPnP error code), but in special cases it might also be another soco.exceptions.SoCoException or even a requests exception.

ip_address: The speaker’s ip address

property boot_seqnum

The boot sequence number.

Type: int

property player_name

The speaker’s name.

Type: str

property uid

A unique identifier.

Looks like: 'RINCON_000XXXXXXXXXX1400'

Type: str

property household_id

A unique identifier for all players in a household.

Looks like: 'Sonos_asahHKgjgJGjgjGjggjJgjJG34'

Type: str

property is_visible

Is this zone visible?

A zone might be invisible if, for example, it is a bridge, or the slave part of stereo pair.

Type: bool

property is_bridge

Is this zone a bridge?

Type: bool

property is_coordinator

Is this zone a group coordinator?

Type: bool

property is_soundbar

Is this zone a soundbar (i.e. has night mode etc.)?

Type: bool

property play_mode

The queue’s play mode.

Case-insensitive options are:

'NORMAL' – Turns off shuffle and repeat.
'REPEAT_ALL' – Turns on repeat and turns off shuffle.
'SHUFFLE' – Turns on shuffle and repeat. (It’s strange, I know.)
'SHUFFLE_NOREPEAT' – Turns on shuffle and turns off repeat.
'REPEAT_ONE' – Turns on repeat one and turns off shuffle.
'SHUFFLE_REPEAT_ONE' – Turns on shuffle and repeat one. (It’s strange, I know.)

Type: str

property shuffle

The queue’s shuffle option.

True if enabled, False otherwise.

Type: bool

property repeat

The queue’s repeat option.

True if enabled, False otherwise.

Can also be the string 'ONE' for play mode 'REPEAT_ONE'.

Type: bool

property cross_fade

The speaker’s cross fade state.

True if enabled, False otherwise

Type: bool

ramp_to_volume(volume, ramp_type='SLEEP_TIMER_RAMP_TYPE')[source]

Smoothly change the volume.

There are three ramp types available:

'SLEEP_TIMER_RAMP_TYPE' (default): Linear ramp from the current volume up or down to the new volume. The ramp rate is 1.25 steps per second. For example: To change from volume 50 to volume 30 would take 16 seconds.

'ALARM_RAMP_TYPE': Resets the volume to zero, waits for about 30 seconds, and then ramps the volume up to the desired value at a rate of 2.5 steps per second. For example: Volume 30 would take 12 seconds for the ramp up (not considering the wait time).

'AUTOPLAY_RAMP_TYPE': Resets the volume to zero and then quickly ramps up at a rate of 50 steps per second. For example: Volume 30 will take only 0.6 seconds.

The ramp rate is selected by Sonos based on the chosen ramp type and the resulting transition time returned. This method is non blocking and has no network overhead once sent.

Parameters

volume (int) – The new volume.
ramp_type (str, optional) – The desired ramp type, as described above.

Returns

The ramp time in seconds, rounded down. Note that this does not include the wait time.

Return type

int

set_relative_volume(relative_volume)[source]

Adjust the volume up or down by a relative amount.

If the adjustment causes the volume to overshoot the maximum value of 100, the volume will be set to 100. If the adjustment causes the volume to undershoot the minimum value of 0, the volume will be set to 0.

Note that this method is an alternative to using addition and subtraction assignment operators (+=, -=) on the volume property of a SoCo instance. These operators perform the same function as set_relative_volume but require two network calls per operation instead of one.

Parameters: relative_volume (int) – The relative volume adjustment. Can be positive or negative.
Returns: The new volume setting.
Return type: int
Raises: ValueError – If relative_volume cannot be cast as an integer.

play_from_queue(index, start=True)[source]

Play a track from the queue by index.

The index number is required as an argument, where the first index is 0.

Parameters

index (int) – 0-based index of the track to play
start (bool) – If the item that has been set should start playing

play()[source]: Play the currently selected track.

play_uri(uri='', meta='', title='', start=True, force_radio=False)[source]

Play a URI.

Playing a URI will replace what was playing with the stream given by the URI. For some streams at least a title is required as metadata. This can be provided using the meta argument or the title argument. If the title argument is provided minimal metadata will be generated. If meta argument is provided the title argument is ignored.

Parameters

uri (str) – URI of the stream to be played.
meta (str) – The metadata to show in the player, DIDL format.
title (str) – The title to show in the player (if no meta).
start (bool) – If the URI that has been set should start playing.
force_radio (bool) – forces a uri to play as a radio stream.

On a Sonos controller music is shown with one of the following display formats and controls:

Radio format: Shows the name of the radio station and other available data. No seek, next, previous, or voting capability. Examples: TuneIn, radioPup
Smart Radio: Shows track name, artist, and album. Limited seek, next and sometimes voting capability depending on the Music Service. Examples: Amazon Prime Stations, Pandora Radio Stations.
Track format: Shows track name, artist, and album the same as when playing from a queue. Full seek, next and previous capabilities. Examples: Spotify, Napster, Rhapsody.

How it is displayed is determined by the URI prefix: x-sonosapi-stream:, x-sonosapi-radio:, x-rincon-mp3radio:, hls-radio: default to radio or smart radio format depending on the stream. Others default to track format: x-file-cifs:, aac:, http:, https:, x-sonos-spotify: (used by Spotify), x-sonosapi-hls-static: (Amazon Prime), x-sonos-http: (Google Play & Napster).

Some URIs that default to track format could be radio streams, typically http:, https: or aac:. To force display and controls to Radio format set force_radio=True

Note

Other URI prefixes exist but are less common. If you have information on these please add to this doc string.

Note

A change in Sonos® (as of at least version 6.4.2) means that the devices no longer accepts ordinary http: and https: URIs for radio stations. This method has the option to replaces these prefixes with the one that Sonos® expects: x-rincon-mp3radio: by using the “force_radio=True” parameter. A few streams may fail if not forced to to Radio format.

pause()[source]: Pause the currently playing track.

stop()[source]: Stop the currently playing track.

end_direct_control_session()[source]: Ends all third-party controlled streaming sessions.

seek(position=None, track=None)[source]

Seek to a given position.

You can seek both a relative position in the current track and a track number in the queue. It is even possible to seek to a tuple or dict containing the absolute position (relative pos. and track nr.):

t = ('0:00:00', 0)
player.seek(*t)
d = {'position': '0:00:00', 'track': 0}
player.seek(**d)

Parameters

position (str) – The desired timestamp in the current track, specified in the format of HH:MM:SS or H:MM:SS
track (int) – The (zero-based) track index in the queue

Raises

ValueError – If neither position nor track are specified.
SoCoUPnPException – UPnP Error 701 if seeking is not supported, UPnP Error 711 if the target is invalid.

Note

The ‘track’ parameter can only be used if the queue is currently playing. If not, use play_from_queue().

This is currently faster than play_from_queue() if already using the queue, as it does not reinstate the queue.

If speaker is already playing it will continue to play after seek. If paused it will remain paused.

next()[source]

Go to the next track.

Keep in mind that next() can return errors for a variety of reasons. For example, if the Sonos is streaming Pandora and you call next() several times in quick succession an error code will likely be returned (since Pandora has limits on how many songs can be skipped).

previous()[source]

Go back to the previously played track.

Keep in mind that previous() can return errors for a variety of reasons. For example, previous() will return an error code (error code 701) if the Sonos is streaming Pandora since you can’t go back on tracks.

property mute

The speaker’s mute state.

True if muted, False otherwise.

Type: bool

property volume

The speaker’s volume.

An integer between 0 and 100.

Type: int

property bass

The speaker’s bass EQ.

An integer between -10 and 10.

Type: int

property treble

The speaker’s treble EQ.

An integer between -10 and 10.

Type: int

property loudness

The speaker’s loudness compensation.

True if on, False otherwise.

Loudness is a complicated topic. You can read about it on Wikipedia: https://en.wikipedia.org/wiki/Loudness

Type: bool

property balance

The left/right balance for the speaker(s).

Returns: A 2-tuple (left_channel, right_channel) of integers between 0 and 100, representing the volume of each channel. E.g., (100, 100) represents full volume to both channels, whereas (100, 0) represents left channel at full volume, right channel at zero volume.
Return type: tuple

property night_mode

The speaker’s night mode.

True if on, False if off, None if not supported.

Type: bool

property dialog_mode

The speaker’s dialog mode.

True if on, False if off, None if not supported.

Type: bool

property trueplay

Whether Trueplay is enabled on this device. True if on, False if off.

Devices that do not support Trueplay, or which do not have a current Trueplay calibration, will return None on getting the property, and raise a NotSupportedException when setting the property.

Can only be set on visible devices. Attempting to set on non-visible devices will raise a SoCoNotVisibleException.

Type: bool

property supports_fixed_volume

Whether the device supports fixed volume output.

Type: bool

property fixed_volume

The device’s fixed volume output setting.

True if on, False if off. Only applicable to certain Sonos devices (Connect and Port at the time of writing). All other devices always return False.

Attempting to set this property for a non-applicable device will raise a NotSupportedException.

Type: bool

property all_groups

All available groups.

Type: set of soco.groups.ZoneGroup

property group

The Zone Group of which this device is a member.

None if this zone is a slave in a stereo pair.

Type: soco.groups.ZoneGroup

property all_zones

All available zones.

Type: set of soco.groups.ZoneGroup

property visible_zones

All visible zones.

Type: set of soco.groups.ZoneGroup

partymode()[source]

Put all the speakers in the network in the same group, a.k.a Party Mode.

This blog shows the initial research responsible for this: http://blog.travelmarx.com/2010/06/exploring-sonos-via-upnp.html

The trick seems to be (only tested on a two-speaker setup) to tell each speaker which to join. There’s probably a bit more to it if multiple groups have been defined.

join(master)[source]: Join this speaker to another “master” speaker.

unjoin()[source]

Remove this speaker from a group.

Seems to work ok even if you remove what was previously the group master from it’s own group. If the speaker was not in a group also returns ok.

create_stereo_pair(rh_slave_speaker)[source]

Create a stereo pair.

This speaker becomes the master, left-hand speaker of the stereo pair. The rh_slave_speaker becomes the right-hand speaker. Note that this operation will succeed on dissimilar speakers, unlike when using the official Sonos apps.

Parameters: rh_slave_speaker (SoCo) – The speaker that will be added as the right-hand, slave speaker of the stereo pair.
Raises: SoCoUPnPException – if either speaker is already part of a stereo pair.

separate_stereo_pair()[source]

Separate a stereo pair.

This can be called on either the master (left-hand) speaker, or on the slave (right-hand) speaker, to create two independent zones.

Raises: SoCoUPnPException – if the speaker is not a member of a stereo pair.

switch_to_line_in(source=None)[source]

Switch the speaker’s input to line-in.

Parameters: source (SoCo) – The speaker whose line-in should be played. Default is line-in from the speaker itself.

property is_playing_radio

Is the speaker playing radio?

Type: bool

property is_playing_line_in

Is the speaker playing line-in?

Type: bool

property is_playing_tv

Is the playbar speaker input from TV?

Type: bool

static music_source_from_uri(uri)[source]

Determine a music source from a URI.

Parameters: uri (str) – The URI representing the music source
Returns: The current source of music.
Return type: str

Possible return values are:

'NONE' – speaker has no music to play.
'LIBRARY' – speaker is playing queued titles from the music library.
'RADIO' – speaker is playing radio.
'WEB_FILE' – speaker is playing a music file via http/https.
'LINE_IN' – speaker is playing music from line-in.
'TV' – speaker is playing input from TV.
'AIRPLAY' – speaker is playing from AirPlay.
'UNKNOWN' – any other input.

The strings above can be imported as MUSIC_SRC_LIBRARY, MUSIC_SRC_RADIO, etc.

property music_source

The current music source (radio, TV, line-in, etc.).

Possible return values are the same as used in music_source_from_uri().

Type: str

switch_to_tv()[source]: Switch the playbar speaker’s input to TV.

property status_light

The white Sonos status light between the mute button and the volume up button on the speaker.

True if on, otherwise False.

Type: bool

property buttons_enabled

Whether the control buttons on the device are enabled.

True if the control buttons are enabled, False if disabled.

This property can only be set on visible speakers, and will enable or disable the buttons for all speakers in any bonded set (e.g., a stereo pair). Attempting to set it on invisible speakers (e.g., the RH speaker of a stereo pair) will raise a SoCoNotVisibleException.

Type: bool

get_current_track_info()[source]

Get information about the currently playing track.

Returns: A dictionary containing information about the currently playing track: playlist_position, duration, title, artist, album, position and an album_art link.
Return type: dict

If we’re unable to return data for a field, we’ll return an empty string. This can happen for all kinds of reasons so be sure to check values. For example, a track may not have complete metadata and be missing an album name. In this case track[‘album’] will be an empty string.

Note

Calling this method on a slave in a group will not return the track the group is playing, but the last track this speaker was playing.

get_current_media_info()[source]

Get information about the currently playing media.

Returns: A dictionary containing information about the currently playing media: uri, channel.
Return type: dict

If we’re unable to return data for a field, we’ll return an empty string.

get_speaker_info(refresh=False, timeout=None)[source]

Get information about the Sonos speaker.

Parameters

refresh (bool) – Refresh the speaker info cache.
timeout – How long to wait for the server to send data before giving up, as a float, or a (connect timeout, read timeout) tuple e.g. (3, 5). Default is no timeout.

Returns

Information about the Sonos speaker, such as the UID, MAC Address, and Zone Name.

Return type

dict

get_current_transport_info()[source]

Get the current playback state.

Returns

The following information about the speaker’s playing state:

current_transport_state (PLAYING, TRANSITIONING, PAUSED_PLAYBACK, STOPPED)
current_transport_status (OK, ?)
current_speed(1, ?)

Return type

dict

This allows us to know if speaker is playing or not. Don’t know other states of CurrentTransportStatus and CurrentSpeed.

property available_actions

The transport actions that are currently available on the speaker.

Returns: list: A list of strings representing the available actions, such as [‘Set’, ‘Stop’, ‘Play’].

Possible list items are: ‘Set’, ‘Stop’, ‘Pause’, ‘Play’, ‘Next’, ‘Previous’, ‘SeekTime’, ‘SeekTrackNr’.

get_queue(start=0, max_items=100, full_album_art_uri=False)[source]

Get information about the queue.

Parameters

start – Starting number of returned matches
max_items – Maximum number of returned matches
full_album_art_uri – If the album art URI should include the IP address

Returns

A Queue object

This method is heavily based on Sam Soffes (aka soffes) ruby implementation

property queue_size

Size of the queue.

Type: int

get_sonos_playlists(*args, **kwargs)[source]

Convenience method for calling soco.music_library.get_music_library_information('sonos_playlists')

Refer to the docstring for that method: get_music_library_information

add_uri_to_queue(uri, position=0, as_next=False)[source]

Add the URI to the queue.

For arguments and return value see add_to_queue.

add_to_queue(queueable_item, position=0, as_next=False)[source]

Add a queueable item to the queue.

Parameters

queueable_item (DidlObject or MusicServiceItem) – The item to be added to the queue
position (int) – The index (1-based) at which the URI should be added. Default is 0 (add URI at the end of the queue).
as_next (bool) – Whether this URI should be played as the next track in shuffle mode. This only works if play_mode=SHUFFLE.

Returns

The index of the new item in the queue.

Return type

int

add_multiple_to_queue(items, container=None)[source]

Add a sequence of items to the queue.

Parameters

items (list) – A sequence of items to the be added to the queue
container (DidlObject, optional) – A container object which includes the items.

remove_from_queue(index)[source]

Remove a track from the queue by index. The index number is required as an argument, where the first index is 0.

Parameters: index (int) – The (0-based) index of the track to remove

clear_queue()[source]: Remove all tracks from the queue.

get_favorite_radio_shows(start=0, max_items=100)[source]

Get favorite radio shows from Sonos’ Radio app.

Returns:
dict: A dictionary containing the total number of favorites, the number of favorites returned, and the actual list of favorite radio shows, represented as a dictionary with 'title' and 'uri' keys.

Depending on what you’re building, you’ll want to check to see if the total number of favorites is greater than the amount you requested (max_items), if it is, use start to page through and get the entire list of favorites.

Deprecated since version 0.13: Will be removed in version 0.15. Use soco.music_library.get_favorite_radio_shows instead.

get_favorite_radio_stations(start=0, max_items=100)[source]: Get favorite radio stations from Sonos’ Radio app.

See get_favorite_radio_shows() for return type and remarks.

Deprecated since version 0.13: Will be removed in version 0.15. Use soco.music_library.get_favorite_radio_stations instead.

get_sonos_favorites(start=0, max_items=100)[source]: Get Sonos favorites.

See get_favorite_radio_shows() for return type and remarks.

Deprecated since version 0.13: Will be removed in version 0.15. Use soco.music_library.get_sonos_favorites instead.

create_sonos_playlist(title)[source]

Create a new empty Sonos playlist.

Parameters: title – Name of the playlist
Return type: DidlPlaylistContainer

create_sonos_playlist_from_queue(title)[source]

Create a new Sonos playlist from the current queue.

Parameters: title – Name of the playlist
Return type: DidlPlaylistContainer

remove_sonos_playlist(sonos_playlist)[source]

Remove a Sonos playlist.

Parameters: sonos_playlist (DidlPlaylistContainer) – Sonos playlist to remove or the item_id (str).
Returns: True if succesful, False otherwise
Return type: bool
Raises: SoCoUPnPException – If sonos_playlist does not point to a valid object.

add_item_to_sonos_playlist(queueable_item, sonos_playlist)[source]

Adds a queueable item to a Sonos’ playlist.

Parameters

queueable_item (DidlObject) – the item to add to the Sonos’ playlist
sonos_playlist (DidlPlaylistContainer) – the Sonos’ playlist to which the item should be added

set_sleep_timer(sleep_time_seconds)[source]

Sets the sleep timer.

Parameters

sleep_time_seconds (int or NoneType) – How long to wait before turning off speaker in seconds, None to cancel a sleep timer. Maximum value of 86399

Raises

SoCoException – Upon errors interacting with Sonos controller
ValueError – Argument/Syntax errors

get_sleep_timer()[source]

Retrieves remaining sleep time, if any

Returns

Number of seconds left in timer. If there is no: sleep timer currently set it will return None.

Return type

int or NoneType

reorder_sonos_playlist(sonos_playlist, tracks, new_pos, update_id=0)[source]

Reorder and/or Remove tracks in a Sonos playlist.

The underlying call is quite complex as it can both move a track within the list or delete a track from the playlist. All of this depends on what tracks and new_pos specify.

If a list is specified for tracks, then a list must be used for new_pos. Each list element is a discrete modification and the next list operation must anticipate the new state of the playlist.

If a comma formatted string to tracks is specified, then use a similiar string to specify new_pos. Those operations should be ordered from the end of the list to the beginning

See the helper methods clear_sonos_playlist(), move_in_sonos_playlist(), remove_from_sonos_playlist() for simplified usage.

update_id - If you have a series of operations, tracking the update_id and setting it, will save a lookup operation.

Examples

To reorder the first two tracks:

# sonos_playlist specified by the DidlPlaylistContainer object
sonos_playlist = device.get_sonos_playlists()[0]
device.reorder_sonos_playlist(sonos_playlist,
                              tracks=[0, ], new_pos=[1, ])
# OR specified by the item_id
device.reorder_sonos_playlist('SQ:0', tracks=[0, ], new_pos=[1, ])

To delete the second track:

# tracks/new_pos are a list of int
device.reorder_sonos_playlist(sonos_playlist,
                              tracks=[1, ], new_pos=[None, ])
# OR tracks/new_pos are a list of int-like
device.reorder_sonos_playlist(sonos_playlist,
                              tracks=['1', ], new_pos=['', ])
# OR tracks/new_pos are strings - no transform is done
device.reorder_sonos_playlist(sonos_playlist, tracks='1',
                              new_pos='')

To reverse the order of a playlist with 4 items:

device.reorder_sonos_playlist(sonos_playlist, tracks='3,2,1,0',
                              new_pos='0,1,2,3')

Parameters

sonos_playlist – (DidlPlaylistContainer): The Sonos playlist object or the item_id (str) of the Sonos playlist.
tracks – (list): list of track indices(int) to reorder. May also be a list of int like things. i.e. ['0', '1',] OR it may be a str of comma separated int like things. "0,1". Tracks are 0-based. Meaning the first track is track 0, just like indexing into a Python list.
new_pos (list) – list of new positions (int|None) corresponding to track_list. MUST be the same type as tracks. 0-based, see tracks above. None is the indicator to remove the track. If using a list of strings, then a remove is indicated by an empty string.
update_id (int) – operation id (default: 0) If set to 0, a lookup is done to find the correct value.

Returns

Which contains 3 elements: change, length and update_id. Change in size between original playlist and the resulting playlist, the length of resulting playlist, and the new update_id.

Return type

dict

Raises

SoCoUPnPException – If playlist does not exist or if your tracks and/or new_pos arguments are invalid.

clear_sonos_playlist(sonos_playlist, update_id=0)[source]

Clear all tracks from a Sonos playlist. This is a convenience method for reorder_sonos_playlist().

Example:

device.clear_sonos_playlist(sonos_playlist)

Parameters

sonos_playlist – (DidlPlaylistContainer): Sonos playlist object or the item_id (str) of the Sonos playlist.
update_id (int) – Optional update counter for the object. If left at the default of 0, it will be looked up.

Returns

See reorder_sonos_playlist()

Return type

dict

Raises

ValueError – If sonos_playlist specified by string and is not found.
SoCoUPnPException – See reorder_sonos_playlist()

move_in_sonos_playlist(sonos_playlist, track, new_pos, update_id=0)[source]

Move a track to a new position within a Sonos Playlist. This is a convenience method for reorder_sonos_playlist().

Example:

device.move_in_sonos_playlist(sonos_playlist, track=0, new_pos=1)

Parameters

sonos_playlist – (DidlPlaylistContainer): Sonos playlist object or the item_id (str) of the Sonos playlist.
track (int) – 0-based position of the track to move. The first track is track 0, just like indexing into a Python list.
new_pos (int) – 0-based location to move the track.
update_id (int) – Optional update counter for the object. If left at the default of 0, it will be looked up.

Returns

See reorder_sonos_playlist()

Return type

dict

Raises

SoCoUPnPException – See reorder_sonos_playlist()

remove_from_sonos_playlist(sonos_playlist, track, update_id=0)[source]

Remove a track from a Sonos Playlist. This is a convenience method for reorder_sonos_playlist().

Example:

device.remove_from_sonos_playlist(sonos_playlist, track=0)

Parameters

sonos_playlist – (DidlPlaylistContainer): Sonos playlist object or the item_id (str) of the Sonos playlist.
track (int) – 0*-based position of the track to move. The first track is track 0, just like indexing into a Python list.
update_id (int) – Optional update counter for the object. If left at the default of 0, it will be looked up.

Returns

See reorder_sonos_playlist()

Return type

dict

Raises

SoCoUPnPException – See reorder_sonos_playlist()

get_sonos_playlist_by_attr(attr_name, match)[source]

Return the first Sonos Playlist DidlPlaylistContainer that matches the attribute specified.

Parameters

attr_name (str) – DidlPlaylistContainer attribute to compare. The most useful being: ‘title’ and ‘item_id’.
match (str) – Value to match.

Returns

The: first matching playlist object.

Return type

(DidlPlaylistContainer)

Raises

(AttributeError) – If indicated attribute name does not exist.
(ValueError) – If a match can not be found.

Example:

device.get_sonos_playlist_by_attr('title', 'Foo')
device.get_sonos_playlist_by_attr('item_id', 'SQ:3')

get_battery_info(timeout=3.0)[source]

Get battery information for a Sonos speaker.

Obtains battery information for Sonos speakers that report it. This only applies to Sonos Move speakers at the time of writing.

This method may only work on Sonos ‘S2’ systems.

Parameters

timeout (float, optional) – The timeout to use when making the HTTP request.

Returns

A dict containing battery status data.

Example return value:

{'Health': 'GREEN',
 'Level': 100,
 'Temperature': 'NORMAL',
 'PowerSource': 'SONOS_CHARGING_RING'}

Return type

dict

Raises

NotSupportedException – If the speaker does not report battery information.
ConnectionError – If the HTTP connection failed, or returned an unsuccessful status code.
TimeoutError – If making the HTTP connection, or reading the response, timed out.