This document introduces Deferreds, Twisted’s preferred mechanism for controlling the flow of asynchronous code. Don’t worry if you don’t know what that means yet – that’s why you are here!
It is intended for newcomers to Twisted, and was written particularly to help people read and understand code that already uses Deferreds.
This document assumes you have a good working knowledge of Python. It assumes no knowledge of Twisted.
By the end of the document, you should understand what Deferreds are and how they can be used to coordinate asynchronous code. In particular, you should be able to:
Read and understand code that uses Deferreds
Translate from synchronous code to asynchronous code and back again
Implement any sort of error-handling for asynchronous code that you wish
When you write Python code, one prevailing, deep, unassailled assumption is that a line of code within a block is only ever executed after the preceding line is finished.
pod_bay_doors.open()
pod.launch()
The pod bay doors open, and only then does the pod launch. That’s wonderful. One-line-after-another is a built-in mechanism in the language for encoding the order of execution. It’s clear, terse, and unambiguous.
Exceptions make things more complicated.
If pod_bay_doors.open() raises an exception, then we cannot know with certainty that it completed, and so it would be wrong to proceed blithely to the next line.
Thus, Python gives us try, except, finally, and else, which together model almost every conceivable way of handling a raised exception, and tend to work really well.
Function application is the other way we encode order of execution:
pprint(sorted(x.get_names()))
First x.get_names() gets called, then sorted is called with its return value, and then pprint with whatever sorted returns.
It can also be written as:
names = x.get_names()
sorted_names = sorted(names)
pprint(sorted_names)
Sometimes it leads us to encode the order when we don’t need to, as in this example:
total = 0
for account in accounts:
total += account.get_balance()
print("Total balance $%s" % (total,))
But that’s normally not such a big deal.
All in all, things are pretty good, and all of the explanation above is laboring familiar and obvious points. One line comes after another and one thing happens after another, and both facts are inextricably tied.
But what if we had to do it differently?
What if we could no longer rely on the previous line of code being finished (whatever that means) before we started to interpret & execute the next line of code?
What if pod_bay_doors.open() returned immediately, triggering something somewhere else that would eventually open the pod bay doors, recklessly sending the Python interpreter plunging into pod.launch() ?
That is, what would we do if the order of execution did not match the order of lines of Python? If “returning” no longer meant “finishing”?
Asynchronous operations?
How would we prevent our pod from hurtling into the still-closed doors? How could we respond to a potential failure to open the doors at all? What if opening the doors gave us some crucial information that we needed in order to launch the pod? How would we get access to that information?
And, crucially, since we are writing code, how can we write our code so that we can build other code on top of it?
We would still need a way of saying “do this only when that has finished”.
We would need a way of distinguishing between successful completion and interrupted processing, normally modeled with try, expect, else, and finally.
We need a mechanism for getting return failures and exception information from the thing that just executed to the thing that needs to happen next.
We need somehow to be able to operate on results that we don’t have yet. Instead of acting, we need to make and encode plans for how we would act if we could.
Unless we hack the interpreter somehow, we would need to build this with the Python language constructs we are given: methods, functions, objects, and the like.
Perhaps we want something that looks a little like this:
placeholder = pod_bay_doors.open()
placeholder.when_done(pod.launch)
Twisted tackles this problem with Deferreds, a type of object designed to do one thing, and one thing only: encode an order of execution separately from the order of lines in Python source code.
It doesn’t deal with threads, parallelism, signals, or subprocesses. It doesn’t know anything about an event loop, greenlets, or scheduling. All it knows about is what order to do things in. How does it know that? Because we explicitly tell it the order that we want.
Thus, instead of writing:
pod_bay_doors.open()
pod.launch()
We write:
d = pod_bay_doors.open()
d.addCallback(lambda ignored: pod.launch())
That introduced a dozen new concepts in a couple of lines of code, so let’s break it down. If you think you’ve got it, you might want to skip to the next section.
Here, pod_bay_doors.open() is returning a Deferred, which we assign to d.
We can think of d as a placeholder, representing the value that open() will eventually return when it finally gets around to finishing.
To “do this next”, we add a callback to d.
A callback is a function that will be called with whatever open() eventually returns.
In this case, we don’t care, so we make a function with a single, ignored parameter that just calls pod.launch().
So, we’ve replaced the “order of lines is order of execution” with a deliberate, in-Python encoding of the order of execution, where d represents the particular flow and d.addCallback replaces “new line”.
Of course, programs generally consist of more than two lines, and we still don’t know how to deal with failure.
In what follows, we are going to take each way of expressing order of operations in normal Python (using lines of code and try/except) and translate them into an equivalent code built with Deferred objects.
This is going to be a bit painstaking, but if you want to really understand how to use Deferreds and maintain code that uses them, it is worth understanding each example below.
Recall our example from earlier:
pprint(sorted(x.get_names()))
Also written as:
names = x.get_names()
sorted_names = sorted(names)
pprint(sorted_names)
What if neither get_names nor sorted can be relied on to finish before they return?
That is, if both are asynchronous operations?
Well, in Twisted-speak they would return Deferreds and so we would write:
d = x.get_names()
d.addCallback(sorted)
d.addCallback(pprint)
Eventually, sorted will get called with whatever get_names finally delivers.
When sorted finishes, pprint will be called with whatever it delivers.
We could also write this as:
x.get_names().addCallback(sorted).addCallback(pprint)
Since d.addCallback returns d.
We often want to write code equivalent to this:
try:
x.get_names()
except Exception, e:
report_error(e)
How would we write this with Deferreds?
d = x.get_names()
d.addErrback(report_error)
errback is the Twisted name for a callback that is called when an error is received.
This glosses over an important detail.
Instead of getting the exception object e, report_error would get a Failure object, which has all of the useful information that e does, but is optimized for use with Deferreds.
We’ll dig into that a bit later, after we’ve dealt with all of the other combinations of exceptions.
What if we want to do something after our try block if it actually worked?
Abandoning our contrived examples and reaching for generic variable names, we get:
try:
y = f()
except Exception, e:
g(e)
else:
h(y)
Well, we’d write it like this with Deferreds:
d = f()
d.addCallbacks(h, g)
Where addCallbacks means “add a callback and an errback at the same time”.
h is the callback, g is the errback.
Now that we have addCallbacks along with addErrback and addCallback, we can match any possible combination of try, except, else, and finally by varying the order in which we call them.
Explaining exactly how it works is tricky (although the Deferred reference does rather a good job), but once we’re through all of the examples it ought to be clearer.
What if we want to do something after our try/except block, regardless of whether or not there was an exception?
That is, what if we wanted to do the equivalent of this generic code:
try:
y = f()
except Exception, e:
y = g(e)
h(y)
And with Deferreds:
d = f()
d.addErrback(g)
d.addCallback(h)
Because addErrback returns d, we can chain the calls like so:
f().addErrback(g).addCallback(h)
The order of addErrback and addCallback matters.
In the next section, we can see what would happen when we swap them around.
What if we want to wrap up a multi-step operation in one exception handler?
try:
y = f()
z = h(y)
except Exception, e:
g(e)
With Deferreds, it would look like this:
d = f()
d.addCallback(h)
d.addErrback(g)
Or, more succinctly:
d = f().addCallback(h).addErrback(g)
What about finally?
How do we do something regardless of whether or not there was an exception?
How do we translate this:
try:
y = f()
finally:
g()
Well, roughly we do this:
d = f()
d.addBoth(g)
This adds g as both the callback and the errback.
It is equivalent to:
d.addCallbacks(g, g)
Why “roughly”?
Because if f raises, g will be passed a Failure object representing the exception.
Otherwise, g will be passed the asynchronous equivalent of the return value of f() (i.e. y).
Twisted features a decorator named inlineCallbacks which allows you to work with Deferreds without writing callback functions.
This is done by writing your code as generators, which yield Deferreds instead of attaching callbacks.
Consider the following function written in the traditional Deferred style:
def getUsers():
d = makeRequest("GET", "/users")
d.addCallback(json.loads)
return d
using inlineCallbacks, we can write this as:
from twisted.internet.defer import inlineCallbacks, returnValue
@inlineCallbacks
def getUsers(self):
responseBody = yield makeRequest("GET", "/users")
returnValue(json.loads(responseBody))
a couple of things are happening here:
instead of calling addCallback on the Deferred returned by makeRequest, we yield it.
This causes Twisted to return the Deferred‘s result to us.
we use returnValue to propagate the final result of our function.
Because this function is a generator, we cannot use the return statement; that would be a syntax error.
Note
New in version 15.0.
On Python 3.3 and above, instead of writing returnValue(json.loads(responseBody)) you can instead write return json.loads(responseBody).
This can be a significant readability advantage, but unfortunately if you need compatibility with Python 2, this isn’t an option.
Both versions of getUsers present exactly the same API to their callers: both return a Deferred that fires with the parsed JSON body of the request.
Though the inlineCallbacks version looks like synchronous code, which blocks while waiting for the request to finish, each yield statement allows other code to run while waiting for the Deferred being yielded to fire.
inlineCallbacks become even more powerful when dealing with complex control flow and error handling.
For example, what if makeRequest fails due to a connection error?
For the sake of this example, let’s say we want to log the exception and return an empty list.
def getUsers():
d = makeRequest("GET", "/users")
def connectionError(failure):
failure.trap(ConnectionError)
log.failure("makeRequest failed due to connection error",
failure)
return []
d.addCallbacks(json.loads, connectionError)
return d
With inlineCallbacks, we can rewrite this as:
@inlineCallbacks
def getUsers(self):
try:
responseBody = yield makeRequest("GET", "/users")
except ConnectionError:
log.failure("makeRequest failed due to connection error")
returnValue([])
returnValue(json.loads(responseBody))
Our exception handling is simplified because we can use Python’s familiar try / except syntax for handling ConnectionErrors.
You have been introduced to asynchronous code and have seen how to use Deferreds to:
Do something after an asynchronous operation completes successfully
Use the result of a successful asynchronous operation
Catch errors in asynchronous operations
Do one thing if an operation succeeds, and a different thing if it fails
Do something after an error has been handled successfully
Wrap multiple asynchronous operations with one error handler
Do something after an asynchronous operation, regardless of whether it succeeded or failed
Write code without callbacks using inlineCallbacks
These are very basic uses of Deferred. For detailed information about how they work, how to combine multiple Deferreds, and how to write code that mixes synchronous and asynchronous APIs, see the Deferred reference. Alternatively, read about how to write functions that generate Deferreds.