ao-send-telem - Re-transmit stored telemetry file
ao-send-telem [-T tty-device] [--tty
tty-device] [-D altos-device] [--device altos-device]
[-F frequency (kHz)] [--frequency frequency (kHz)] [-R]
[--realtime] <flight.telem>
- -T tty-device | --tty
tty-device
- This selects which tty device ao-dumplog uses to communicate with the
target device.
- -D AltOS-device | --device
AltOS-device
- Search for a connected device. This requires an argument of one of the
following forms:
- TeleDongle:2
TeleDongle
2
- Leaving out the product name will cause the tool to select a suitable
product, leaving out the serial number will cause the tool to match one of
the available devices.
- -F kHz | --frequency kHz
- This selects which frequency to send the specified packets on.
- -R | --realtime
- This makes the program delay between packets in pad mode. Normally, pad
mode packets are sent as quickly as possible.
ao-send-telem reads the specified flight telemetry log and
re-transmits it via the specified ground station device