Link - Link ICC profiles.
collink
[options] srcprofile dstprofile linkedprofile
- -v Verbose
-A manufacturer Manufacturer description string
- -M model
- Model description string
- -D description
- Profile Description string (Default "inoutfile")
- -C copyright
- Copyright string
- -V
- Verify existing profile, rather than link
- -q lmhu
- Quality - Low, Medium (def), High, Ultra
- -r res
- Override clut res. set by -q
- -n
- Don't preserve device linearization curves in result
- -f
- Special :- Force neutral colors to be K only output
- -fk
- Special :- Force K only neutral colors to be K only output
- -F
- Special :- Force all colors to be K only output
- -fcmy
- Special :- Force 100% C,M or Y only to stay pure
- -p absprof
- Include abstract profile in link
- -a file.cal
- Apply calibration curves to link output and append linear
- -H file.cal
- Append calibration curves to 3dlut
- -s
- Simple Mode (default)
- -g [src.gam]
- Gamut Mapping Mode [optional source image gamut]
- -G [src.gam]
- Gamut Mapping Mode using inverse outprofile A2B
- Simple Mode Options: -i in_intent p = perceptual, r = relative
colorimetric,
- s = saturation, a = absolute colorimetric
- -o out_intent
- p = perceptual, r = relative colorimetric, s = saturation, a = absolute
colorimetric
- Gamut Mapping
- Mode Options:
- -i intent
- set linking intent from the following choice:
- a - Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric]
- aw - Absolute Colorimetric (in Jab) with scaling to fit white point aa -
Absolute Appearance
- r - White Point Matched Appearance [ICC Relative Colorimetric]
- la - Luminance axis matched Appearance
- p - Perceptual (Preferred) (Default) [ICC Perceptual]
- pa - Perceptual Apperance ms - Saturation
- s - Enhanced Saturation [ICC Saturation]
- al - Absolute Colorimetric (Lab) rl - White Point Matched Colorimetric
(Lab)
- -w [J,a,b]
- Use forced whitepoint hack [optional target point]
- -c viewcond
- set source viewing conditions for CIECAM02, either an enumerated choice,
or a parameter
- -d viewcond
- set destination viewing conditions for CIECAM02, either an enumerated
choice, or parameter:value changes
- pp - Practical Reflection Print (ISO-3664 P2) pe - Print evaluation
environment (CIE 116-1995) pc - Critical print evaluation environment
(ISO-3664 P1) mt - Monitor in typical work environment mb - Bright monitor
in bright work environment md - Monitor in darkened work environment jm -
Projector in dim environment jd - Projector in dark environment tv -
Television/Film Studio
- pcd - Photo CD - original scene outdoors
- ob - Original scene - Bright Outdoors cx - Cut Sheet Transparencies on a
viewing box
- s:surround
- n = auto, a = average, m = dim, d = dark, c = transparency (default
average)
- w:X:Y:Z
- Adapted white point as XYZ (default media white)
- w:x:y
- Adapted white point as x, y
- a:adaptation
- Adaptation luminance in cd.m^2 (default 50.0)
- b:background
- Background % of image luminance (default 20)
- l:imagewhite
- Image white in cd.m^2 if surround = auto (default 250)
- f:flare
- Flare light % of image luminance (default 0)
- g:glare
- Flare light % of ambient (default 1)
- g:X:Y:Z
- Flare color as XYZ (default media white, Abs: D50)
- g:x:y
- Flare color as x, y
- -t tlimit
- set source total ink limit, 0 - 400% (estimate by default)
- -T klimit
- set source black ink limit, 0 - 100% (estimate by default)
- Inverse outprofile A2B Options: -k tezhxr CMYK Black
generation
- t = transfer K from source to destination, e = retain K of destination B2A
table z = zero K, h = 0.5 K, x = maximum K, r = ramp K (default)
-k p stle stpo enpo enle shape
- p = black target generation curve parameters
-k q stle0 stpo0 enpo0 enle0 shape0 stle2 stpo2 enpo2
enle2 shape2
- q = transfer source K to dual curve limits
- -K parameters
- Same as -k, but target is K locus rather than K value itself
- -l tlimit
- set destination total ink limit, 0 - 400% (estimate by default)
- -L klimit
- set destination black ink limit, 0 - 100% (estimate by default)
- -3 flag
- Create "3DLut" output file as well as devlink
- e
- eeColor .txt file
- m
- MadVR .3dlut file
- -I b
- Apply BT.1886-like mapping with effective gamma 2.2 to input
- -I b:g.g
- Apply BT.1886-like mapping with effective gamma g.g to input
- -I B
- Apply BT.1886 mapping with technical gamma 2.4 to input
- -I B:g.g
- Apply BT.1886 mapping with technical gamma g.g to input
- -e flag
- Video encode input as:
- -E flag
- Video encode output as:
- n
- normal 0..1 full range RGB levels (default)
- t
- (16-235)/255 "TV" RGB levels
- 6
- Rec601 YCbCr SD (16-235,240)/255 "TV" levels
- 7
- Rec709 1125/60Hz YCbCr HD (16-235,240)/255 "TV" levels
- 5
- Rec709 1250/50Hz YCbCr HD (16-235,240)/255 "TV" levels
- 2
- Rec2020 YCbCr UHD (16-235,240)/255 "TV" levels
- C
- Rec2020 Constant Luminance YCbCr UHD (16-235,240)/255 "TV"
levels
- x
- xvYCC Rec601 YCbCr Rec709 Prims. SD (16-235,240)/255 "TV"
levels
- X
- xvYCC Rec709 YCbCr Rec709 Prims. HD (16-235,240)/255 "TV"
levels
- -P
- Create gamut gammap.wrl diagostic