Measure - Read Print Spot values.
Measure spot values, Version 1.6.3
spotread [-options] [logfile]
- -v
- Verbose mode
- -s
- Print spectrum for each reading
- -S
- Plot spectrum for each reading
- -c listno
- Set communication port from the following list (default 1)
- ** No ports found **
- -t
- Use transmission measurement mode
- -e
- Use emissive measurement mode (absolute results)
- -eb
- Use display white brightness relative measurement mode
- -ew
- Use display white point relative chromatically adjusted mode
- -p
- Use telephoto measurement mode (absolute results)
- -pb
- Use projector white brightness relative measurement mode
- -pw
- Use projector white point relative chromatically adjusted mode
- -a
- Use ambient measurement mode (absolute results)
- -f
- Use ambient flash measurement mode (absolute results)
- -I illum
- Set simulated instrument illumination using FWA (def -i illum): M0,
M1, M2, A, C, D50, D50M2, D65, F5, F8, F10 or file.sp]
- -i illum
- Choose illuminant for computation of CIE XYZ from spectral data & FWA:
A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp
- -Q observ
- Choose CIE Observer for spectral data or CCSS instrument: 1931_2 (def),
1964_10, S&B 1955_2, shaw, J&V 1978_2 (Choose FWA during
operation)
- -F filter
- Set filter configuration (if aplicable):
- n
- None
- p
- Polarising filter
- 6
- D65
- u
- U.V. Cut
- -E extrafilterfile
- Apply extra filter compensation file
- -x
- Display Yxy instead of Lab
- -h
- Display LCh instead of Lab
- -V
- Show running average and std. devation from ref.
- -T
- Display correlated color temperatures and CRI
- -N
- Disable auto calibration of instrument
- -H
- Start in high resolution spectrum mode (if available)
- -X file.ccmx
- Apply Colorimeter Correction Matrix
- -X file.ccss
- Use Colorimeter Calibration Spectral Samples for calibration
- -Y r|n
- Override refresh, non-refresh display mode
- -Y R:rate
- Override measured refresh rate with rate Hz
- -Y A
- Use non-adaptive integration time mode (if available).
- -W n|h|x
- Override serial port flow control: n = none, h = HW, x = Xon/Xoff
- -D [level]
- Print debug diagnostics to stderr
- logfile
- Optional file to save reading results as text