DOKK / manpages / debian 10 / array-info / array-info.1.en
array-info(1) array-info(1)

array-info - check the status of a HP (Compaq) SmartArray controller


array-info -d array_device_path
[-a|-l|-A|-c|-s|-L|-h]

Array-info is a command line tool to retrieve informations and logical drives status from several RAID controllers (currently HP Compaq IDA and CISS and MD). It displays informations about the firmware version, Rom revision, number of physical and logical drives on the controller, aswell as the fault tolerance, size, number of physical disks and status for each logical drive.

Path to array device, e.g. /dev/ida/c0d0 or /dev/cciss/c0d1
Show informations about all drives
Show informations about selected logical drive
Show informations about controller
Show informations about logical drives
Show physical device informations
Show status of logical drives
Show all informations
Show version
Show help about options

This manual page was written by Raphaël Pinson <<raphink@ubuntu.com>>. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 or any later version published by the Free Software Foundation.

2006-12-15