auto.master - Master Map for automounter
The auto.master map is consulted to set up automount
managed mount points when the autofs(8) script is invoked or the
automount(8) program is run. Each line describes a mount point and
refers to an autofs map describing file systems to be mounted under the
mount point.
The default location of the master map is /etc/auto.master
but an alternate name may be given on the command line when running the
automounter and the default master map may changed by setting the
MASTER_MAP_NAME configuration variable in /etc/default/autofs.
If the master map name has no path then the system Name Service Switch
configuration will be consulted and each of the sources searched in line
with the rules given in the Name Service Switch configuration.
Access to mounts in maps is governed by a key.
For direct maps the mount point is always specified as:
/-
and the key used within the direct map is the full path to the
mount point. The direct map may have multiple entries in the master map.
For indirect maps access is by using the path scheme:
/mount-point/key
where mount-point is one of the entries listed in the
master map. The key is a single directory component and is matched
against entries in the map given in the entry (See autofs(5)).
Additionally, a map may be included from its source as if it were
itself present in the master map by including a line of the form:
+[maptype[,format]:]map [options]
and automount(8) will process the map according to the
specification described below for map entries. Indirect map entries must be
unique in the master map so second and subsequent entries for an indirect
mount point are ignored by automount(8).
Master map entries have three fields separated by an arbitrary
number of spaces or tabs. Lines beginning with # are comments. The first
field is the mount point described above and the second field is the name of
the map to be consulted for the mount point followed by the third field
which contains options to be applied to all entries in the map.
The format of a master map entry is:
- mount-point [map-type[,format]:]map [options]
- mount-point
- Base location for the autofs filesystem to be mounted. For indirect
maps this directory will be created (as with mkdir -p) and is
removed when the autofs filesystem is umounted.
- map-type
- Type of map used for this mount point. The following are valid map
types:
- file
- The map is a regular text file.
- program
- The map is an executable program, which is passed a key on the command
line and returns an entry (everything besides the key) on stdout if
successful. Optinally, the keyword exec may be used as a synonym for
program to avoid confusion with amd formated maps mount type program.
- yp
- The map is a NIS (YP) database.
- nisplus
- The map is a NIS+ database.
- hesiod
- The map is a hesiod database whose filsys entries are used for
maps.
- ldap or
ldaps
- The map is stored in an LDAP directory. If ldaps is used the
appropriate certificate must be configured in the LDAP client.
- multi
- This map type allows the specification of multiple maps separated by
"--". These maps are searched in order to resolve key
lookups.
- dir
- This map type can be used at + master map including notation. The
contents of files under given directory are included to the master map.
The name of file to be included must be ended with ".autofs". A
file will be ignored if its name is not ended with the suffix. In addition
a dot file, a file which name is started with "." is also
ignored.
- format
-
Format of the map data; currently the formats recognized are sun,
which is a subset of the Sun automounter map format, hesiod, for
hesiod filesys entries and amd for amd formated map entries. If the
format is left unspecified, it defaults to sun for all map types
except hesiod unless it is a top level amd mount that has a
configuration entry for the mount point path, in which case the format
used is amd.
- map
-
Name of the map to use. This is an absolute UNIX pathname for maps of types
file, dir, or program, and the name of a database in
the case for maps of type yp, nisplus, or hesiod or
the dn of an LDAP entry for maps of type ldap.
- options
-
Any remaining command line arguments without leading dashes (-) are taken as
options (-o) to mount. Arguments with leading dashes are
considered options for the maps and are passed to automount (8).
The sun format supports the following options:
- -Dvariable=value
- Replace variable with value in map substitutions.
- -strict
- Treat errors when mounting file systems as fatal. This is important when
multiple file systems should be mounted (`multimounts'). If this option is
given, no file system is mounted at all if at least one file system can't
be mounted.
- [no]browse
- This is an autofs specific option that is a pseudo mount option and so is
given without a leading dash. Use of the browse option pre-creates mount
point directories for indirect mount maps so the map keys can be seen in a
directory listing without being mounted. Use of this option can cause
performance problem if the indirect map is large so it should be used with
caution. The internal program default is to enable browse mode for
indirect mounts but the default installed configuration overrides this by
setting BROWSE_MODE to "no" because of the potential performance
problem.
- nobind
- This is an autofs specific option that is a pseudo mount option and so is
given without a leading dash. It may be used either in the master map
entry (so it effects all the map entries) or with individual map entries
to prevent bind mounting of local NFS filesystems. For direct mount maps
the option is only effective if specified on the first direct map entry
and is applied to all direct mount maps in the master map. It is ignored
if given on subsequent direct map entries. It may be used on individual
map entries of both types. Bind mounting of NFS file systems can also be
prevented for specific map entrys by adding the "port=" mount
option to the entries.
- symlink
- This option makes bind mounting use a symlink instead of an actual bind
mount. It is an autofs specific option that is a pseudo mount option and
so is given without a leading dash. It may be used with indirect map
entries only, either in the master map (so it effects all map entries) or
with individual map entries. The option is ignored for direct mounts and
non-root offest mount entries.
- -r,
--random-multimount-selection
- Enables the use of ramdom selection when choosing a host from a list of
replicated servers. This option is applied to this mount only, overriding
the global setting that may be specified on the command line.
- -w,
--use-weight-only
- Use only specified weights for server selection where more than one server
is specified in the map entry. If no server weights are given then each
available server will be tried in the order listed, within proximity.
- -t, --timeout
<seconds>
- Set the expire timeout for map entries. This option can be used to
override the global default given either on the command line or in the
configuration.
- -n, --negative-timeout
<seconds>
- Set the timeout for caching failed key lookups. This option can be used to
override the global default given either on the command line or in the
configuration.
- --mode
<octal_mode>
- Set the directory mode for the base location of the autofs mount
point. If this option is given, autofs will chmod that directory
with this mode.
If "-hosts" is given as the map then accessing a key
under the mount point which corresponds to a hostname will allow access to
the exports of that host. The hosts map cannot be dynamically updated and
requires a HUP signal to be sent to the daemon for it to check hosts for an
update. Due to possible hierarchic dependencies within a mount tree, it
might not be completely updated during the HUP signal processing.
For example, with an entry in the master map of /net -hosts
accessing /net/myserver will mount exports from myserver on directories
below /net/myserver.
NOTE: mounts done from a hosts map will be mounted with the
"nosuid,nodev,intr" options unless overridden by explicily
specifying the "suid", "dev" or "nointr"
options in the master map entry.
If the map type ldap is specified the mapname is of the
form [//servername/]dn, where the optional servername is the
name of the LDAP server to query, and dn is the Distinguished Name of
a subtree to search for map entries. The old style
ldap:servername:mapname is also understood. Alternatively, the type
can be obtained from the Name Service Switch configuration, in which case
the map name alone must be given.
If no schema is set in the autofs configuration then autofs will
check each of the commonly used schema for a valid entry and if one is found
it will used for subsequent lookups.
There are three common schemas in use:
- nisMap
-
Entries in the nisMap schema are nisObject objects in the
specified subtree, where the cn attribute is the key (the wildcard
key is "/"), and the nisMapEntry attribute contains the
information used by the automounter.
- automountMap
- The automountMap schema has two variations that differ in the
attribute used for the map key. Entries in the automountMap schema are
automount objects in the specified subtree, where the cn or
automountKey attribute (depending on local usage) is the key (the
wildcard key is "/"), and the automountInformation
attribute contains the information used by the automounter. Note that the
cn attribute is case insensitive.
The object classes and attributes used for accessing automount
maps in LDAP can be changed by setting entries in the autofs configuration
located in /etc/default/autofs.conf.
- NOTE:
- If a schema is given in the configuration then all the schema
configuration values must be set, any partial schema specification will be
ignored.
- For amd format maps a
different schema is used:
- amdMap
-
The amdmap schema contains attributes amdmapName,
amdmapKey and amdmapValue where amdmapName contains
the name of the containing map, amdmapKey contains the map key and
amdmapValue contains the map entry.
LDAP authenticated binds, TLS encrypted connections and
certification may be used by setting appropriate values in the autofs
authentication configuration file and configuring the LDAP client with
appropriate settings. The default location of this file is
/etc/autofs_ldap_auth.conf.
If this file exists it will be used to establish whether TLS or
authentication should be used.
An example of this file is:
<?xml version="1.0" ?>
<autofs_ldap_sasl_conf
usetls="yes"
tlsrequired="no"
authrequired="no"
authtype="DIGEST-MD5"
user="xyz"
secret="abc"
/>
If TLS encryption is to be used the location of the Certificate
Authority certificate must be set within the LDAP client configuration in
order to validate the server certificate. If, in addition, a certified
connection is to be used then the client certificate and private key file
locations must also be configured within the LDAP client.
In OpenLDAP these may be configured in the ldap.conf file
or in the per-user configuration. For example it may be sensible to use the
system wide configuration for the location of the Certificate Authority
certificate and set the location of the client certificate and private key
in the per-user configuration. The location of these files and the
configuration entry requirements is system dependent so the documentation
for your installation will need to be consulted to get further
information.
See autofs_ldap_auth.conf (5) for more information.
/- auto.data
/home /etc/auto.home
/mnt yp:mnt.map
This will generate two mountpoints for /home and
/mnt and install direct mount triggers for each entry in the direct
mount map auto.data. All accesses to /home will lead to the
consultation of the map in /etc/auto.home and all accesses to
/mnt will consult the NIS map mnt.map. All accesses to paths
in the map auto.data will trigger mounts when they are accessed and
the Name Service Switch configuration will be used to locate the source of
the map auto.data.
This manual page was written by Christoph Lameter
<chris@waterf.org>, for the Debian GNU/Linux system. Edited by
<hpa@transmeta.com> and Ian Kent <raven@themaw.net> .