- global.hash_collision
Type: int Allowed Values: 0-99999
Internal value used to prevent hash collisions on mountpoints. Do not change
this.
Default: 0
- global.use_flock
Type: bool Allowed Values: true|false
Prevent multiple snapshots (from different profiles or users) to be run at the
same time
Default: false
- profile<N>.name
Type: str Allowed Values: text
Name of this profile.
Default: Main profile
- profile<N>.snapshots.automatic_backup_anacron_period
Type: int Allowed Values: 0-99999
How many units to wait between new snapshots with anacron? Only valid for
profile<N>.snapshots.automatic_backup_mode = 25|27
Default: 1
- profile<N>.snapshots.automatic_backup_anacron_unit
Type: int Allowed Values: 10|20|30|40
Units to wait between new snapshots with anacron.
10 = hours
20 = days
30 = weeks
40 = months
Only valid for
profile<N>.snapshots.automatic_backup_mode = 25|27
Default: 20
- profile<N>.snapshots.automatic_backup_day
Type: int Allowed Values: 1-28
Which day of month the cronjob should run? Only valid for
profile<N>.snapshots.automatic_backup_mode >= 40
Default: 1
- profile<N>.snapshots.automatic_backup_mode
Type: int Allowed Values:
0|1|2|4|7|10|12|14|16|18|19|20|25|27|30|40|80
Which schedule used for crontab. The crontab entry will be generated with
'backintime check-config'.
0 = Disabled
1 = at every boot
2 = every 5 minute
4 = every 10 minute
7 = every 30 minute
10 = every hour
12 = every 2 hours
14 = every 4 hours
16 = every 6 hours
18 = every 12 hours
19 = custom defined hours
20 = every day
25 = daily anacron
27 = when drive get connected
30 = every week
40 = every month
80 = every year
Default: 0
- profile<N>.snapshots.automatic_backup_time
Type: int Allowed Values: 0-24
What time the cronjob should run? Only valid for
profile<N>.snapshots.automatic_backup_mode >= 20
Default: 0
- profile<N>.snapshots.automatic_backup_weekday
Type: int Allowed Values: 1 = monday - 7 = sunday
Which day of week the cronjob should run? Only valid for
profile<N>.snapshots.automatic_backup_mode = 30
Default: 7
- profile<N>.snapshots.backup_on_restore.enabled
Type: bool Allowed Values: true|false
Rename existing files before restore into FILE.backup.YYYYMMDD
Default: true
- profile<N>.snapshots.bwlimit.enabled
Type: bool Allowed Values: true|false
Limit rsync bandwidth usage over network. Use this with mode SSH. For mode Local
you should rather use ionice.
Default: false
- profile<N>.snapshots.bwlimit.value
Type: int Allowed Values: 0-99999
Bandwidth limit in KB/sec.
Default: 3000
- profile<N>.snapshots.check_for_changes
Type: bool Allowed Values: true|false
Perform a dry-run before taking snapshots. Don't take a new snapshot if nothing
has changed. Only valid with
profile<N>.snapshots.full_rsync =
false
Default: true
- profile<N>.snapshots.continue_on_errors
Type: bool Allowed Values: true|false
Continue on errors. This will keep incomplete snapshots rather than deleting and
start over again.
Default: true
- profile<N>.snapshots.copy_links
Type: bool Allowed Values: true|false
When symlinks are encountered, the item that they point to (the reference) is
copied, rather than the symlink.
Default: false
- profile<N>.snapshots.copy_unsafe_links
Type: bool Allowed Values: true|false
This tells rsync to copy the referent of symbolic links that point outside the
copied tree. Absolute symlinks are also treated like ordinary files.
Default: false
- profile<N>.snapshots.cron.ionice
Type: bool Allowed Values: true|false
Run cronjobs with 'ionice -c2 -n7'. This will give BackInTime the lowest IO
bandwidth priority to not interrupt any other working process.
Default: true
- profile<N>.snapshots.cron.nice
Type: bool Allowed Values: true|false
Run cronjobs with 'nice -n 19'. This will give BackInTime the lowest CPU
priority to not interrupt any other working process.
Default: true
- profile<N>.snapshots.cron.redirect_stderr
Type: bool Allowed Values: true|false
redirect stderr to /dev/null in cronjobs
Default: False
- profile<N>.snapshots.cron.redirect_stdout
Type: bool Allowed Values: true|false
redirect stdout to /dev/null in cronjobs
Default: true
- profile<N>.snapshots.custom_backup_time
Type: str Allowed Values: comma separated int
(8,12,18,23) or */3
Custom hours for cronjob. Only valid for
profile<N>.snapshots.automatic_backup_mode = 19
Default: 8,12,18,23
- profile<N>.snapshots.dont_remove_named_snapshots
Type: bool Allowed Values: true|false
Keep snapshots with names during smart_remove.
Default: true
- profile<N>.snapshots.exclude.bysize.enabled
Type: bool Allowed Values: true|false
Enable exclude files by size.
Default: false
- profile<N>.snapshots.exclude.bysize.value
Type: int Allowed Values: 0-99999
Exclude files bigger than value in MiB. With 'Full rsync mode' disabled this
will only affect new files because for rsync this is a transfer option, not an
exclude option. So big files that has been backed up before will remain in
snapshots even if they had changed.
Default: 500
- profile<N>.snapshots.exclude.<I>.value
Type: str Allowed Values: file, folder or pattern
(relative or absolute)
Exclude this file or folder. <I> must be a counter starting with 1
Default: ''
- profile<N>.snapshots.exclude.size
Type: int Allowed Values: 0-99999
Quantity of profile<N>.snapshots.exclude.<I> entries.
Default: -1
- profile<N>.snapshots.full_rsync
Type: bool Allowed Values: true|false
Full rsync mode. May be faster but snapshots are not read-only anymore and
destination file-system must support all linux attributes (date, rights, user,
group...)
Default: false
- profile<N>.snapshots.full_rsync.take_snapshot_regardless_of_changes
Type: bool Allowed Values: true|false
Create a new snapshot regardless if there were changes or not. Only valid with
profile<N>.snapshots.full_rsync = true
Default: false
- profile<N>.snapshots.gnu_find_suffix_support
Type: bool Allowed Values: true|false
Remote SSH host support GNU find suffix (find -exec COMMAND {} +).
Default: true
- profile<N>.snapshots.include.<I>.type
Type: int Allowed Values: 0|1
Specify if
profile<N>.snapshots.include.<I>.value is a folder
(0) or a file (1).
Default: 0
- profile<N>.snapshots.include.<I>.value
Type: str Allowed Values: absolute path
Include this file or folder. <I> must be a counter starting with 1
Default: ''
- profile<N>.snapshots.include.size
Type: int Allowed Values: 0-99999
Quantity of profile<N>.snapshots.include.<I> entries.
Default: -1
- profile<N>.snapshots.keep_only_one_snapshot.enabled
Type: bool Allowed Values: true|false
NOT YET IMPLEMENTED. Remove all snapshots but one.
Default: false
- profile<N>.snapshots.local.nocache
Type: bool Allowed Values: true|false
Run rsync on local machine with 'nocache'. This will prevent files from being
cached in memory.
Default: false
- profile<N>.snapshots.local_encfs.path
Type: str Allowed Values: absolute path
Where to save snapshots in mode 'local_encfs'.
Default: ''
- profile<N>.snapshots.log_level
Type: int Allowed Values: 1-3
Log level used during take_snapshot.
1 = Error
2 = Changes
3 = Info
Default: 3
- profile<N>.snapshots.min_free_inodes.enabled
Type: bool Allowed Values: true|false
Remove snapshots until
profile<N>.snapshots.min_free_inodes.value
free inodes in % is reached.
Default: true
- profile<N>.snapshots.min_free_inodes.value
Type: int Allowed Values: 1-15
Keep at least value % free inodes.
Default: 2
- profile<N>.snapshots.min_free_space.enabled
Type: bool Allowed Values: true|false
Remove snapshots until
profile<N>.snapshots.min_free_space.value
free space is reached.
Default: true
- profile<N>.snapshots.min_free_space.unit
Type: int Allowed Values: 10|20
10 = MB
20 = GB
Default: 20
- profile<N>.snapshots.min_free_space.value
Type: int Allowed Values: 1-99999
Keep at least value + unit free space.
Default: 1
- profile<N>.snapshots.mode
Type: str Allowed Values: local|local_encfs|ssh|ssh_encfs
Use mode (or backend) for this snapshot. Look at 'man backintime' section
'Modes'.
Default: local
- profile<N>.snapshots.<MODE>.password.save
Type: bool Allowed Values: true|false
Save password to system keyring (gnome-keyring or kwallet). <MODE> must be
the same as
profile<N>.snapshots.mode
Default: false
- profile<N>.snapshots.<MODE>.password.use_cache
Type: bool Allowed Values: true|false
Cache password in RAM so it can be read by cronjobs. Security issue: root might
be able to read that password, too. <MODE> must be the same as
profile<N>.snapshots.mode
Default: true if home is not encrypted
- profile<N>.snapshots.no_on_battery
Type: bool Allowed Values: true|false
Don't take snapshots if the Computer runs on battery.
Default: false
- profile<N>.snapshots.notify.enabled
Type: bool Allowed Values: true|false
Display notifications (errors, warnings) through libnotify.
Default: true
- profile<N>.snapshots.path
Type: str Allowed Values: absolute path
Where to save snapshots in mode 'local'. This path must contain a
folderstructure like 'backintime/<HOST>/<USER>/<PROFILE_ID>'
Default: ''
- profile<N>.snapshots.path.host
Type: str Allowed Values: text
Set Host for snapshot path
Default: local hostname
- profile<N>.snapshots.path.profile
Type: str Allowed Values: 1-99999
Set Profile-ID for snapshot path
Default: current Profile-ID
- profile<N>.snapshots.path.user
Type: str Allowed Values: text
Set User for snapshot path
Default: local username
- profile<N>.snapshots.path.uuid
Type: str Allowed Values: text
Devices uuid used to automatically set up udev rule if the drive is not
connected.
Default: ''
- profile<N>.snapshots.preserve_acl
Type: bool Allowed Values: true|false
Preserve ACL. The source and destination systems must have compatible ACL
entries for this option to work properly.
Default: false
- profile<N>.snapshots.preserve_xattr
Type: bool Allowed Values: true|false
Preserve extended attributes (xattr).
Default: false
- profile<N>.snapshots.remove_old_snapshots.enabled
Type: bool Allowed Values: true|false
Remove all snapshots older than value + unit
Default: true
- profile<N>.snapshots.remove_old_snapshots.unit
Type: int Allowed Values: 20|30|80
20 = days
30 = weeks
80 = years
Default: 80
- profile<N>.snapshots.remove_old_snapshots.value
Type: int Allowed Values: 0-99999
Snapshots older than this times units will be removed
Default: 10
- profile<N>.snapshots.rsync_options.enabled
Type: bool Allowed Values: true|false
Past additional options to rsync
Default: false
- profile<N>.snapshots.rsync_options.value
Type: str Allowed Values: text
rsync options. Options must be quoted e.g. --exclude-from="/path/to/my
exclude file"
Default: ''
- profile<N>.snapshots.smart_remove
Type: bool Allowed Values: true|false
Run smart_remove to clean up old snapshots after a new snapshot was created.
Default: false
- profile<N>.snapshots.smart_remove.keep_all
Type: int Allowed Values: 0-99999
Keep all snapshots for X days.
Default: 2
- profile<N>.snapshots.smart_remove.keep_one_per_day
Type: int Allowed Values: 0-99999
Keep one snapshot per day for X days.
Default: 7
- profile<N>.snapshots.smart_remove.keep_one_per_month
Type: int Allowed Values: 0-99999
Keep one snapshot per month for X month.
Default: 24
- profile<N>.snapshots.smart_remove.keep_one_per_week
Type: int Allowed Values: 0-99999
Keep one snapshot per week for X weeks.
Default: 4
- profile<N>.snapshots.smart_remove.run_remote_in_background
Type: bool Allowed Values: true|false
If using mode SSH or SSH-encrypted, run smart_remove in background on remote
machine
Default: false
- profile<N>.snapshots.ssh.cipher
Type: str Allowed Values: default | aes192-cbc |
aes256-cbc | aes128-ctr | aes192-ctr | aes256-ctr | arcfour | arcfour256 |
arcfour128 | aes128-cbc | 3des-cbc | blowfish-cbc | cast128-cbc
Cipher that is used for encrypting the SSH tunnel. Depending on the environment
(network bandwidth, cpu and hdd performance) a different cipher might be
faster.
Default: default
- profile<N>.snapshots.ssh.host
Type: str Allowed Values: IP or domain address
Remote host used for mode 'ssh' and 'ssh_encfs'.
Default: ''
- profile<N>.snapshots.ssh.ionice
Type: bool Allowed Values: true|false
Run rsync and other commands on remote host with 'ionice -c2 -n7'
Default: false
- profile<N>.snapshots.ssh.max_arg_length
Type: int Allowed Values: 0, >700
Maximum argument length of commands run on remote host. This can be tested with
'python3 /usr/share/backintime/common/sshMaxArg.py USER@HOST'.
0 = unlimited
Default: 0
- profile<N>.snapshots.ssh.nice
Type: bool Allowed Values: true|false
Run rsync and other commands on remote host with 'nice -n 19'
Default: false
- profile<N>.snapshots.ssh.nocache
Type: bool Allowed Values: true|false
Run rsync on remote host with 'nocache'. This will prevent files from being
cached in memory.
Default: false
- profile<N>.snapshots.ssh.path
Type: str Allowed Values: absolute or relative path
Snapshot path on remote host. If the path is relative (no leading '/') it will
start from remote Users homedir. An empty path will be replaced with './'.
Default: ''
- profile<N>.snapshots.ssh.port
Type: int Allowed Values: 0-65535
SSH Port on remote host.
Default: 22
- profile<N>.snapshots.ssh.prefix.enabled
Type: bool Allowed Values: true|false
Add prefix to every command which run through SSH on remote host.
Default: false
- profile<N>.snapshots.ssh.prefix.value
Type: str Allowed Values: text
Prefix to run before every command on remote host. Variables need to be escaped
with \$FOO. This doesn't touch rsync. So to add a prefix for rsync use
profile<N>.snapshots.rsync_options.value with
--rsync-path="FOO=bar:\$FOO /usr/bin/rsync"
Default: 'PATH=/opt/bin:/opt/sbin:\$PATH'
- profile<N>.snapshots.ssh.private_key_file
Type: str Allowed Values: absolute path to private key
file
Private key file used for password-less authentication on remote host.
Default: ~/.ssh/id_dsa
- profile<N>.snapshots.ssh.user
Type: str Allowed Values: text
Remote SSH user
Default: local users name
- profile<N>.snapshots.take_snapshot.<STEP>.user.script
Type: str Allowed Values: absolute path
Run this script on events defined by <STEP>.
Possible events for <STEP>:
before
after
new_snapshot
error
Default: ''
- profile<N>.snapshots.use_checksum
Type: bool Allowed Values: true|false
Use checksum to detect changes rather than size + time.
Default: false
- profile<N>.snapshots.user_backup.ionice
Type: bool Allowed Values: true|false
Run BackInTime with 'ionice -c2 -n7' when taking a manual snapshot. This will
give BackInTime the lowest IO bandwidth priority to not interrupt any other
working process.
Default: false
- profile<N>.user_callback.no_logging
Type: bool Allowed Values: true|false
Do not catch std{out|err} from user-callback script. The script will only write
to current TTY. Default is to catch std{out|err} and write it to syslog and
TTY again.
Default: false
- profiles
Type: str Allowed Values: int separated by colon (e.g.
1:3:4)
All active Profiles (<N> in profile<N>.snapshots...).
Default: 1
- profiles.version
Type: int Allowed Values: 1
Internal version of profiles config.
Default: 1