btreplay - recreate IO loads recorded by blktrace
btreplay [ options ] <dev...>
The btrecord and btreplay tools provide the ability
to record and replay IOs captured by the blktrace utility. Attempts
are made to maintain ordering, CPU mappings and time-separation of IOs.
The blktrace utility provides the ability to collect
detailed traces from the kernel for each IO processed by the block IO layer.
The traces provide a complete timeline for each IO processed, including
detailed information concerning when an IO was first received by the block
IO layer — indicating the device, CPU number, time stamp, IO
direction, sector number and IO size (number of sectors). Using this
information, one is able to replay the IO again on the same machine
or another set up entirely.
The basic operating work-flow to replay IOs would be something
like:
-
Run blktrace to collect traces. Here you specify the
device or devices that you wish to trace and later replay IOs upon. Note:
the only traces you are interested in are QUEUE requests —
thus, to save system resources (including storage for traces), one could
specify the -a queue command line option to blktrace.
-
While blktrace is running, you run the workload that you
are interested in.
-
When the work load has completed, you stop the blktrace
utility (thus saving all traces over the complete workload).
-
You extract the pertinent IO information from the traces saved by
blktrace using the btrecord utility. This will parse
each trace file created by blktrace, and crafty IO descriptions
to be used in the next phase of the workload processing.
-
Once btrecord has successfully created a series of data
files to be processed, you can run the btreplay utility which
attempts to generate the same IOs seen during the sample workload phase.
-c <num>
--cpus=<num>
Set number of CPUs to use.
-d <dir>
--input-directory=<dir>
Set input directory. This option requires a single
parameter providing the directory name for where input files are to be found.
The default directory is the current directory (.).
-F
--find-records
Find record files automatically This option instructs
btreplay to go find all the record files in the directory specified
(either via the -d option, or in the default directory
(.).
-h
--help
Show help and exit.
-i <basename>
--input-base=<basename>
Set base name for input files. Each input file has 3
fields:
- 1.
-
Device identifier (taken directly from the device name of the
blktrace output file).
- 2.
-
btrecord base name — by default ``replay''.
- 3.
-
The CPU number (again, taken directly from the
blktrace output file name).
This option requires a single parameter that will override the
default name (replay), and replace it with the specified value.
-I <num>
--iterations=<num>
Set number of iterations to run. This option requires a
single parameter which specifies the number of times to run through the input
files. The default value is 1
-M <filename>
--map-devs=<filename>
Specify device mappings. This option requires a single
parameter which specifies the name of a file contain device mappings. The file
must be very simply managed, with just two pieces of data per line:
-
The device name on the recorded system (with the '/dev/'
removed). Example: /dev/sda would just be sda.
-
The device name on the replay system to use (again, without the
'/dev/' path prepended).
An example file for when one would map devices /dev/sda and
/dev/sdb on the recorded system to dev/sdg and sdh on
the replay system would be:
-
sda sdg
sdb sdh
The only entries in the file that are allowed are these two
element lines — we do not (yet?) support the notion of blank lines,
or comment lines, or the like.
The utility allows for multiple -M options to be supplied
on the command line.
-N
--no-stalls
Disable pre-bunch stalls. When specified on the command
line, all pre-bunch stall indicators will be ignored. IOs will be replayed
without inter-bunch delays.
-x <factor>
--acc-factor=<factor>
Specify acceleration factor. Default value is 1 (no
acceleration).
-v
--verbose
Enable verbose output. When specified on the command
line, this option instructs
btreplay to store information concerning
each
stall and IO operation performed by
btreplay. The name of
each file so created will be the input file name used with an extension of
.rep appended onto it. Thus, an input file of the name
sdab.replay.3 would generate a verbose output file with the name
sdab.replay.3.rep in the directory specified for input files.
In addition, btreplay will also output to stderr the
names of the input files being processed.
-V
--version
Show version number and exit.
-W
--write-enable
Enable writing during replay. As a precautionary measure,
by default btreplay will not process write requests. In order to
enable btreplay to actually write to devices one must explicitly
specify the -W option.
btreplay was written by Alan D. Brunelle. This man page was
created from the btreplay documentation by Bas Zoetekouw.
Report bugs to <linux-btrace@vger.kernel.org>
Copyright © 2007 Alan D. Brunelle, Alan D. Brunelle and
Nathan Scott.
This is free software. You may redistribute copies of it under the terms of
the GNU General Public License <http://www.gnu.org/licenses/gpl.html>.
There is NO WARRANTY, to the extent permitted by law.
This manual page was created for Debian by Bas Zoetekouw. It was derived from
the documentation provided by the authors and it may be used, distributed
and modified under the terms of the GNU General Public License, version 2.
On Debian systems, the text of the GNU General Public License can be found in
/usr/share/common-licenses/GPL-2.
The full documentation for btreplay can be found in
/usr/share/doc/blktrace on Debian systems.
blktrace (8), blkparse (1), btrecord (8)