BORG-CREATE(1) | borg backup tool | BORG-CREATE(1) |
borg-create - Create new archive
borg [common options] create [options] ARCHIVE [PATH...]
This command creates a backup archive containing all files found while recursively traversing all paths specified. Paths are added to the archive as they are given, that means if relative paths are desired, the command has to be run from the correct directory.
When giving '-' as path, borg will read data from standard input and create a file 'stdin' in the created archive from that data.
The archive will consume almost no disk space for files or parts of files that have already been stored in other archives.
The archive name needs to be unique. It must not end in '.checkpoint' or '.checkpoint.N' (with N being a number), because these names are used for checkpoints and treated in special ways.
In the archive name, you may use the following placeholders: {now}, {utcnow}, {fqdn}, {hostname}, {user} and some others.
Backup speed is increased by not reprocessing files that are already part of existing archives and weren't modified. The detection of unmodified files is done by comparing multiple file metadata values with previous values kept in the files cache.
This comparison can operate in different modes as given by --files-cache:
inode number: better safety, but often unstable on network filesystems
Normally, detecting file modifications will take inode information into consideration to improve the reliability of file change detection. This is problematic for files located on sshfs and similar network file systems which do not provide stable inode numbers, such files will always be considered modified. You can use modes without inode in this case to improve performance, but reliability of change detection might be reduced.
ctime vs. mtime: safety vs. speed
The mount points of filesystems or filesystem snapshots should be the same for every creation of a new archive to ensure fast operation. This is because the file cache that is used to determine changed files quickly uses absolute filenames. If this is not possible, consider creating a bind mount to a stable location.
The --progress option shows (from left to right) Original, Compressed and Deduplicated (O, C and D, respectively), then the Number of files (N) processed so far, followed by the currently processed path.
When using --stats, you will get some statistics about how much data was added - the "This Archive" deduplicated size there is most interesting as that is how much your repository will grow. Please note that the "All archives" stats refer to the state after creation. Also, the --stats and --dry-run options are mutually exclusive because the data is not actually compressed and deduplicated during a dry run.
See the output of the "borg help patterns" command for more help on exclude patterns. See the output of the "borg help placeholders" command for more help on placeholders.
See borg-common(1) for common options of Borg commands.
# Backup ~/Documents into an archive named "my-documents" $ borg create /path/to/repo::my-documents ~/Documents # same, but list all files as we process them $ borg create --list /path/to/repo::my-documents ~/Documents # Backup ~/Documents and ~/src but exclude pyc files $ borg create /path/to/repo::my-files \
~/Documents \
~/src \
--exclude '*.pyc' # Backup home directories excluding image thumbnails (i.e. only # /home/<one directory>/.thumbnails is excluded, not /home/*/*/.thumbnails etc.) $ borg create /path/to/repo::my-files /home \
--exclude 'sh:/home/*/.thumbnails' # Backup the root filesystem into an archive named "root-YYYY-MM-DD" # use zlib compression (good, but slow) - default is lz4 (fast, low compression ratio) $ borg create -C zlib,6 --one-file-system /path/to/repo::root-{now:%Y-%m-%d} / # Backup a remote host locally ("pull" style) using sshfs $ mkdir sshfs-mount $ sshfs root@example.com:/ sshfs-mount $ cd sshfs-mount $ borg create /path/to/repo::example.com-root-{now:%Y-%m-%d} . $ cd .. $ fusermount -u sshfs-mount # Make a big effort in fine granular deduplication (big chunk management # overhead, needs a lot of RAM and disk space, see formula in internals # docs - same parameters as borg < 1.0 or attic): $ borg create --chunker-params 10,23,16,4095 /path/to/repo::small /smallstuff # Backup a raw device (must not be active/in use/mounted at that time) $ dd if=/dev/sdx bs=10M | borg create /path/to/repo::my-sdx - # No compression (none) $ borg create --compression none /path/to/repo::arch ~ # Super fast, low compression (lz4, default) $ borg create /path/to/repo::arch ~ # Less fast, higher compression (zlib, N = 0..9) $ borg create --compression zlib,N /path/to/repo::arch ~ # Even slower, even higher compression (lzma, N = 0..9) $ borg create --compression lzma,N /path/to/repo::arch ~ # Only compress compressible data with lzma,N (N = 0..9) $ borg create --compression auto,lzma,N /path/to/repo::arch ~ # Use short hostname, user name and current time in archive name $ borg create /path/to/repo::{hostname}-{user}-{now} ~ # Similar, use the same datetime format as borg 1.1 will have as default $ borg create /path/to/repo::{hostname}-{user}-{now:%Y-%m-%dT%H:%M:%S} ~ # As above, but add nanoseconds $ borg create /path/to/repo::{hostname}-{user}-{now:%Y-%m-%dT%H:%M:%S.%f} ~ # Backing up relative paths by moving into the correct directory first $ cd /home/user/Documents # The root directory of the archive will be "projectA" $ borg create /path/to/repo::daily-projectA-{now:%Y-%m-%d} projectA
The --exclude patterns are not like tar. In tar --exclude .bundler/gems will exclude foo/.bundler/gems. In borg it will not, you need to use --exclude '*/.bundler/gems' to get the same effect. See borg help patterns for more information.
In addition to using --exclude patterns, it is possible to use --exclude-if-present to specify the name of a filesystem object (e.g. a file or folder name) which, when contained within another folder, will prevent the containing folder from being backed up. By default, the containing folder and all of its contents will be omitted from the backup. If, however, you wish to only include the objects specified by --exclude-if-present in your backup, and not include any other contents of the containing folder, this can be enabled through using the --keep-exclude-tags option.
--list outputs a list of all files, directories and other file system items it considered (no matter whether they had content changes or not). For each item, it prefixes a single-letter flag that indicates type and/or status of the item.
If you are interested only in a subset of that output, you can give e.g. --filter=AME and it will only show regular files with A, M or E status (see below).
A uppercase character represents the status of a regular file relative to the "files" cache (not relative to the repo -- this is an issue if the files cache is not used). Metadata is stored in any case and for 'A' and 'M' also new data chunks are stored. For 'U' all data chunks refer to already existing chunks.
A lowercase character means a file type other than a regular file, borg usually just stores their metadata:
Other flags used include:
borg-common(1), borg-delete(1), borg-prune(1), borg-check(1), borg-patterns(1), borg-placeholders(1), borg-compression(1)
The Borg Collective
2019-02-10 |