BORG-UPGRADE(1) | borg backup tool | BORG-UPGRADE(1) |
borg-upgrade - upgrade a repository from a previous version
borg [common options] upgrade [options] [REPOSITORY]
Upgrade an existing, local Borg repository.
Not every change requires that you run borg upgrade.
You do not need to run it when:
Use borg upgrade --tam REPO to require manifest authentication introduced with Borg 1.0.9 to address security issues. This means that modifying the repository after doing this with a version prior to 1.0.9 will raise a validation error, so only perform this upgrade after updating all clients using the repository to 1.0.9 or newer.
This upgrade should be done on each client for safety reasons.
If a repository is accidentally modified with a pre-1.0.9 client after this upgrade, use borg upgrade --tam --force REPO to remedy it.
If you routinely do this you might not want to enable this upgrade (which will leave you exposed to the security issue). You can reverse the upgrade by issuing borg upgrade --disable-tam REPO.
See https://borgbackup.readthedocs.io/en/stable/changes.html#pre-1-0-9-manifest-spoofing-vulnerability for details.
This currently supports converting an Attic repository to Borg and also helps with converting Borg 0.xx to 1.0.
Currently, only LOCAL repositories can be upgraded (issue #465).
Please note that borg create (since 1.0.0) uses bigger chunks by default than old borg or attic did, so the new chunks won't deduplicate with the old chunks in the upgraded repository. See --chunker-params option of borg create and borg recreate.
borg upgrade will change the magic strings in the repository's segments to match the new Borg magic strings. The keyfiles found in $ATTIC_KEYS_DIR or ~/.attic/keys/ will also be converted and copied to $BORG_KEYS_DIR or ~/.config/borg/keys.
The cache files are converted, from $ATTIC_CACHE_DIR or ~/.cache/attic to $BORG_CACHE_DIR or ~/.cache/borg, but the cache layout between Borg and Attic changed, so it is possible the first backup after the conversion takes longer than expected due to the cache resync.
Upgrade should be able to resume if interrupted, although it will still iterate over all segments. If you want to start from scratch, use borg delete over the copied repository to make sure the cache files are also removed:
Unless --inplace is specified, the upgrade process first creates a backup copy of the repository, in REPOSITORY.before-upgrade-DATETIME, using hardlinks. This requires that the repository and its parent directory reside on same filesystem so the hardlink copy can work. This takes longer than in place upgrades, but is much safer and gives progress information (as opposed to cp -al). Once you are satisfied with the conversion, you can safely destroy the backup copy.
WARNING: Running the upgrade in place will make the current copy unusable with older version, with no way of going back to previous versions. This can PERMANENTLY DAMAGE YOUR REPOSITORY! Attic CAN NOT READ BORG REPOSITORIES, as the magic strings have changed. You have been warned.
See borg-common(1) for common options of Borg commands.
# Upgrade the borg repository to the most recent version. $ borg upgrade -v /path/to/repo making a hardlink copy in /path/to/repo.before-upgrade-2016-02-15-20:51:55 opening attic repository with borg and converting no key file found for repository converting repo index /path/to/repo/index.0 converting 1 segments... converting borg 0.xx to borg current no key file found for repository
attic offered a "passphrase" encryption mode, but this was removed in borg 1.0 and replaced by the "repokey" mode (which stores the passphrase-protected encryption key into the repository config).
Thus, to upgrade a "passphrase" attic repo to a "repokey" borg repo, 2 steps are needed, in this order:
The Borg Collective
2019-02-10 |