calibre-server - calibre-server
calibre-server [options] [path to library folder...]
Start the calibre Content server. The calibre Content server
exposes your calibre libraries over the internet. You can specify the path
to the library folders as arguments to calibre-server. If you do not
specify any paths, all the libraries that the main calibre program knows
about will be used.
Sempre que passeu arguments a calibre-server i aquests
tinguin espais en blanc, delimiteu els arguments amb cometes. Per exemple:
"/some path/with spaces"
- --access-log
- Path to the access log file. This log contains information about clients
connecting to the server and making requests. By default no access logging
is done.
- --ajax-timeout
- Time (in seconds) to wait for a response from the server when making
queries.
- --auth-mode
- Choose the type of authentication used. Set the HTTP authentication mode
used by the server. Set to "basic" if you are
putting this server behind an SSL proxy. Otherwise, leave it as
"auto", which will use
"basic" if SSL is configured otherwise it will use
"digest".
- --auto-reload
- Automatically reload server when source code changes. Useful for
development. You should also specify a small value for the shutdown
timeout.
- --ban-after
- Number of login failures for ban. The number of login failures after which
an IP address is banned
- --ban-for
- Ban IP addresses that have repeated login failures. Temporarily bans
access for IP addresses that have repeated login failures for the
specified number of minutes. Useful to prevent attempts at guessing
passwords. If set to zero, no banning is done.
- --custom-list-template
- Path to a JSON file containing a template for the custom book list mode.
The easiest way to create such a template file is to go to
Preferences-> Sharing over the net-> Book list template in calibre,
create the template and export it.
- --daemonize
- Executa el procés en segon pla com a dimoni (només a
Linux).
- --displayed-fields
- Restrict displayed user-defined fields. Comma separated list of
user-defined metadata fields that will be displayed by the Content server
in the /opds and /mobile views. If you specify this option, any fields not
in this list will not be displayed. For example: my_rating,my_tags
- --enable-auth,
--disable-auth
- Password based authentication to access the server. Normally, the server
is unrestricted, allowing anyone to access it. You can restrict access to
predefined users with this option. Per defecte, aquesta opció
està inhabilitada.
- --enable-local-write,
--disable-local-write
- Allow un-authenticated local connections to make changes. Normally, if you
do not turn on authentication, the server operates in read-only mode, so
as to not allow anonymous users to make changes to your calibre libraries.
This option allows anybody connecting from the same computer as the server
is running on to make changes. This is useful if you want to run the
server without authentication but still use calibredb to make changes to
your calibre libraries. Note that turning on this option means any program
running on the computer can make changes to your calibre libraries. Per
defecte, aquesta opció està inhabilitada.
- --enable-log-not-found,
--disable-log-not-found
- Log HTTP 404 (Not Found) requests. Normally, the server logs all HTTP
requests for resources that are not found. This can generate a lot of log
spam, if your server is targeted by bots. Use this option to turn it off.
Per defecte, aquesta opció està habilitada.
- --enable-use-bonjour,
--disable-use-bonjour
- Advertise OPDS feeds via BonJour. Advertise the OPDS feeds via the BonJour
service, so that OPDS based reading apps can detect and connect to the
server automatically. Per defecte, aquesta opció està
habilitada.
- --enable-use-sendfile,
--disable-use-sendfile
- Zero copy file transfers for increased performance. This will use
zero-copy in-kernel transfers when sending files over the network,
increasing performance. However, it can cause corrupted file transfers on
some broken filesystems. If you experience corrupted file transfers, turn
it off. Per defecte, aquesta opció està habilitada.
- --ignored-fields
- Ignored user-defined metadata fields. Comma separated list of user-defined
metadata fields that will not be displayed by the Content server in the
/opds and /mobile views. For example: my_rating,my_tags
- --listen-on
- The interface on which to listen for connections. The default is to listen
on all available interfaces. You can change this to, for example,
"127.0.0.1" to only listen for connections from
the local machine, or to "::" to listen to all
incoming IPv6 and IPv4 connections.
- --log
- Path to log file for server log. This log contains server information and
errors, not access logs. By default it is written to stdout.
- --manage-users
- Gestioneu la base de dades dels usuaris que poden connectar-se a aquest
servidor. Vegeu també l'opció --userdb.
- --max-job-time
- Maximum time for worker processes. Maximum amount of time worker processes
are allowed to run (in minutes). Set to zero for no limit.
- --max-jobs
- Maximum number of worker processes. Worker processes are launched as
needed and used for large jobs such as preparing a book for viewing,
adding books, converting, etc. Normally, the max. number of such processes
is based on the number of CPU cores. You can control it by this
setting.
- --max-log-size
- Mida màx. del fitxer del registre (en MB). La mida màxima
dels fitxers dels registres, generats pel servidor. Quan el registre
supera aquesta mida, es rota automàticament. Establiu-ho a zero per
inhabilitar la rotació del registre.
- --max-opds-items
- Maximum number of books in OPDS feeds. The maximum number of books that
the server will return in a single OPDS acquisition feed.
- --max-opds-ungrouped-items
- Maximum number of ungrouped items in OPDS feeds. Agrupa els ítems
en categories com ara autors o etiquetes per la primera lletra quan hi
hagi més d'aquest nombre d'ítems. Establiu-ho
a zero per a inhabilitar-ho.
- --num-per-page
- Number of books to show in a single page. The number of books to show in a
single page in the browser.
- --pidfile
- Desa el PID del procés al fitxer que s'especifiqui
- --port
- El port on escoltar les connexions.
- --timeout
- El temps (en segons) després del qual es tanca una connexió
ociosa.
- --url-prefix
- A prefix to prepend to all URLs. Useful if you wish to run this server
behind a reverse proxy. For example use, /calibre as the URL prefix.
- --userdb
- Path to the user database to use for authentication. The database is a
SQLite file. To create it use --manage-users. You can read more
about managing users at:
https://manual.calibre-ebook.com/server.html#managing-user-accounts-from-the-command-line-only
- --version
- mostra el número de versió del programa i surt
- --worker-count
- Nombre de subprocessos de treball a utilitzar per a processar les
peticions.