ebook-convert - ebook-convert
ebook-convert input_file output_file [options]
Convert an e-book from one format to another.
input_file is the input and output_file is the output. Both must
be specified as the first two arguments to the command.
The output e-book format is guessed from the file extension of
output_file. output_file can also be of the special format .EXT where EXT is
the output file extension. In this case, the name of the output file is
derived from the name of the input file. Note that the filenames must not
start with a hyphen. Finally, if output_file has no extension, then it is
treated as a directory and an "open e-book" (OEB) consisting of
HTML files is written to that directory. These files are the files that
would normally have been passed to the output plugin.
After specifying the input and output file you can customize the
conversion by specifying various options. The available options depend on
the input and output file types. To get help on them specify the input and
output file and then use the -h option.
For full documentation of the conversion system see conversion
Alati kui edastad programmile ebook-convert tühikuid
sisaldavaid argumente, ümbritse argumendid jutumärkidega.
Näiteks: "/some path/with spaces"
The options and default values for the options change depending on
both the input and output formats, so you should always check with:
ebook-convert myfile.input_format myfile.output_format -h
Below are the options that are common to all conversion, followed
by the options specific to every input and output format.
- SISENDVALIKUD
- VÄLJUNDVALIKUD
- VÄLIMUS
- HEURISTILINE TÖÖTLEMINE
- OTSING JA ASENDAMINE
- ÜLESEHITUSE TUVASTUS
- SISUKORD
- METAANDMED
- SILUMINE
- --input-profile
- Täpsusta sisendprofiil. Sisendprofiil annab
teisendussüsteemile teavet, kuidas suhtuda sisenddokumendi
erinevasse informatsiooni. Näiteks resolutsioonist sõltuv
pikkus (pikkus pikslites). Valikud on:cybookg3, cybook_opus, default,
hanlinv3, hanlinv5, illiad, irexdr1000, irexdr800, kindle, msreader,
mobipocket, nook, sony, sony300, sony900
- --list-recipes
- Loetle sisseehitatud retseptide nimesid. Sa saad sisseehitatud retseptist
e-raamatut luua sedasi: ebook-convert "Retsepti
Nimi.recipe" väljund.epub
- --output-profile
- Specify the output profile. The output profile tells the conversion system
how to optimize the created document for the specified device (such as by
resizing images for the device screen size). In some cases, an output
profile can be used to optimize the output for a particular device, but
this is rarely necessary. Choices are:cybookg3, cybook_opus, default,
generic_eink, generic_eink_hd, generic_eink_large, hanlinv3, hanlinv5,
illiad, ipad, ipad3, irexdr1000, irexdr800, jetbook5, kindle, kindle_dx,
kindle_fire, kindle_oasis, kindle_pw, kindle_pw3, kindle_voyage, kobo,
msreader, mobipocket, nook, nook_color, nook_hd_plus, pocketbook_900,
pocketbook_pro_912, galaxy, sony, sony300, sony900, sony-landscape,
sonyt3, tablet
- --version
- näita programmi versiooninumbrit ja välju
Suvandid mobi-sisendfaili töötlemise juhtimiseks
- --input-encoding
- Täpsusta sisenddokumendi kodeering. Kasutab dokumendi kodeeringu
asemel valitud kodeeringut. Kasulik dokumentide puhul, milles ei ole
märgitud kodeeringut või millel on eksitavad kodeeringu
deklaratsioonid.
Suvandid epub väljundi töötlemise
juhtimiseks
- --dont-split-on-page-breaks
- Turn off splitting at page breaks. Normally, input files are automatically
split at every page break into two files. This gives an output e-book that
can be parsed faster and with less resources. However, splitting is slow
and if your source file contains a very large number of page breaks, you
should turn off splitting on page breaks.
- --epub-flatten
- See valik on vajalik ainult juhul, kui kavatsed EPUB-i avada programmiga
FBReaderJ. See tasandab EPUBi-sisese failisüsteemi, pannes
kõik failid kõrgeima tasandi kausta.
- --epub-inline-toc
- Sisesta reasisene sisukord, mis näib osana raamatu peamisest
sisust.
- --epub-version
- Loodava EPUB-faili versioon. EPUB 2 on kõige ühilduvam;
kasuta EPUB 3 ainult siis, kui tead, et see on kindlasti vajalik.
- Extract the contents of the generated EPUB file to the specified
directory. The contents of the directory are first deleted, so be
careful.
- --flow-size
- Tükelda kõik HTML-failid, mis on suuremad sellest suurusest
(ühikutes KB). See on vajalik, kuna enamik EPUB-i lugereid ei suuda
käsitleda suuri failisuurusi. Vaikimisi väärtus 260KB
on suurus, mis on vajalik programmi Adobe Digital Editions jaoks. Pane
väärtuseks 0, kui tahad suurusepõhise
tükeldamise keelata.
- --no-default-epub-cover
- Tavaliselt, kui sisendfailis pole kaant ja sa ei määratle
seda, luuakse vaikimisi kaanepilt pealkirja, autorite ja muu sellisega.
See säte keelab selle kaane loomise.
- --no-svg-cover
- Do not use SVG for the book cover. Use this option if your EPUB is going
to be used on a device that does not support SVG, like the iPhone or the
JetBook Lite. Without this option, such devices will display the cover as
a blank page.
- --preserve-cover-aspect-ratio
- When using an SVG cover, this option will cause the cover to scale to
cover the available screen area, but still preserve its aspect ratio
(ratio of width to height). That means there may be white borders at the
sides or top and bottom of the image, but the image will never be
distorted. Without this option the image may be slightly distorted, but
there will be no borders.
- --pretty-print
- Kui täpsustatud, siis väljundi plugin proovib luua
väljundit, mis on inimesele võimalikult loetav. Ei pruugi
mõne väljundi plugina puhul nähtavat mõju
avaldada.
Suvandid väljundi väljanägemise
kontrollimiseks
- --asciiize
- Translitereeri (tähi ümber) Unicode tähemärgid
ASCII kujule. Kasuta ettevaatlikult, sest see asendab Unicode
tähemärgid ASCII-ga. Näiteks paneb see sõne
"Михаил
Горбачёв"
asemele "Mikhail Gorbachiov". Samuti pane
tähele, et kui tähemärgil on mitu tõlgendust
(näiteks hiina ja jaapani tähemärgid), siis
kasutatakse calibre kasutajaliidese praeguse keele kujutamist.
- --base-font-size
- The base font size in pts. All font sizes in the produced book will be
rescaled based on this size. By choosing a larger size you can make the
fonts in the output bigger and vice versa. By default, when the value is
zero, the base font size is chosen based on the output profile you
chose.
- --change-justification
- Change text justification. A value of "left"
converts all justified text in the source to left aligned (i.e.
unjustified) text. A value of "justify" converts
all unjustified text to justified. A value of
"original" (the default) does not change
justification in the source file. Note that only some output formats
support justification.
- --embed-all-fonts
- Embed every font that is referenced in the input document but not already
embedded. This will search your system for the fonts, and if found, they
will be embedded. Embedding will only work if the format you are
converting to supports embedded fonts, such as EPUB, AZW3, DOCX or PDF.
Please ensure that you have the proper license for embedding the fonts
used in this document.
- --embed-font-family
- Embed the specified font family into the book. This specifies the
"base" font used for the book. If the input
document specifies its own fonts, they may override this base font. You
can use the filter style information option to remove fonts from the input
document. Note that font embedding only works with some output formats,
principally EPUB, AZW3 and DOCX.
- --expand-css
- By default, calibre will use the shorthand form for various CSS properties
such as margin, padding, border, etc. This option will cause it to use the
full expanded form instead. Note that CSS is always expanded when
generating EPUB files with the output profile set to one of the Nook
profiles as the Nook cannot handle shorthand CSS.
- Either the path to a CSS stylesheet or raw CSS. This CSS will be appended
to the style rules from the source file, so it can be used to override
those rules.
- --filter-css
- A comma separated list of CSS properties that will be removed from all CSS
style rules. This is useful if the presence of some style information
prevents it from being overridden on your device. For example:
font-family,color,margin-left,margin-right
- --font-size-mapping
- CSS fondi nimede vastendamine fondi suurusele. Näiteseadistus on
12,12,14,16,18,20,22,24. Need vastendamised on xx-väike kuni
xx-suur ning viimane on kõige suurema fondi suurus. Fontide
skaleerimise algoritm kasutab neid suurusi, et mõistlikult fonte
skaleerida. Vaikeseadistuse otsustab valitud väljundiprofiil.
- --insert-blank-line
- Sisesta lõikude vahele tühi rida. Ei tööta,
kui lähtefail ei kasuta lõike (sildid <p> või
<div>).
- --insert-blank-line-size
- Set the height of the inserted blank lines (in em). The height of the
lines between paragraphs will be twice the value set here.
- --keep-ligatures
- Preserve ligatures present in the input document. A ligature is a special
rendering of a pair of characters like ff, fi, fl et cetera. Most readers
do not have support for ligatures in their default fonts, so they are
unlikely to render correctly. By default, calibre will turn a ligature
into the corresponding pair of normal characters. This option will
preserve them instead.
- --line-height
- The line height in pts. Controls spacing between consecutive lines of
text. Only applies to elements that do not define their own line height.
In most cases, the minimum line height option is more useful. By default
no line height manipulation is performed.
- --linearize-tables
- Some badly designed documents use tables to control the layout of text on
the page. When converted these documents often have text that runs off the
page and other artifacts. This option will extract the content from the
tables and present it in a linear fashion.
- --margin-bottom
- Set the bottom margin in pts. Default is 5.0. Setting this to less than
zero will cause no margin to be set (the margin setting in the original
document will be preserved). Note: Page oriented formats such as PDF and
DOCX have their own margin settings that take precedence.
- --margin-left
- Set the left margin in pts. Default is 5.0. Setting this to less than zero
will cause no margin to be set (the margin setting in the original
document will be preserved). Note: Page oriented formats such as PDF and
DOCX have their own margin settings that take precedence.
- --margin-right
- Set the right margin in pts. Default is 5.0. Setting this to less than
zero will cause no margin to be set (the margin setting in the original
document will be preserved). Note: Page oriented formats such as PDF and
DOCX have their own margin settings that take precedence.
- --margin-top
- Set the top margin in pts. Default is 5.0. Setting this to less than zero
will cause no margin to be set (the margin setting in the original
document will be preserved). Note: Page oriented formats such as PDF and
DOCX have their own margin settings that take precedence.
- --minimum-line-height
- The minimum line height, as a percentage of the element's
calculated font size. calibre will ensure that every element has a line
height of at least this setting, irrespective of what the input document
specifies. Set to zero to disable. Default is 120%. Use this setting in
preference to the direct line height specification, unless you know what
you are doing. For example, you can achieve "double
spaced" text by setting this to 240.
- --remove-paragraph-spacing
- Remove spacing between paragraphs. Also sets an indent on paragraphs of
1.5em. Spacing removal will not work if the source file does not use
paragraphs (<p> or <div> tags).
- --remove-paragraph-spacing-indent-size
- When calibre removes blank lines between paragraphs, it automatically sets
a paragraph indent, to ensure that paragraphs can be easily distinguished.
This option controls the width of that indent (in em). If you set this
value negative, then the indent specified in the input document is used,
that is, calibre does not change the indentation.
- --smarten-punctuation
- Teisenda tavalised jutumärgid, mõttekriipsud ja
kolmikpunktid nende tüpograafiliselt õigete vastetega.
Üksikasjade saamiseks vaata lehte
https://daringfireball.net/projects/smartypants
- --subset-embedded-fonts
- Subset all embedded fonts. Every embedded font is reduced to contain only
the glyphs used in this document. This decreases the size of the font
files. Useful if you are embedding a particularly large font with lots of
unused glyphs.
- --transform-css-rules
- Path to a file containing rules to transform the CSS styles in this book.
The easiest way to create such a file is to use the wizard for creating
rules in the calibre GUI. Access it in the "Look &
feel->Transform styles" section of the conversion dialog.
Once you create the rules, you can use the
"Export" button to save them to a file.
Modify the document text and structure using common patterns.
Disabled by default. Use --enable-heuristics to enable. Individual actions
can be disabled with the --disable-* options.
- --disable-dehyphenate
- Analüüsi poolituskriipsudega sõnu terves dokumendis.
Dokumenti ennast kasutatakse sõnastikuna, määramaks,
kas need kriipsud tuleks alles jätta või eemaldada.
- --disable-fix-indents
- Turn indentation created from multiple non-breaking space entities into
CSS indents.
- --disable-format-scene-breaks
- Left aligned scene break markers are center aligned. Replace soft scene
breaks that use multiple blank lines with horizontal rules.
- --disable-markup-chapter-headings
- Detect unformatted chapter headings and sub headings. Change them to h2
and h3 tags. This setting will not create a TOC, but can be used in
conjunction with structure detection to create one.
- --disable-renumber-headings
- Looks for occurrences of sequential <h1> or <h2> tags. The
tags are renumbered to prevent splitting in the middle of chapter
headings.
- --enable-heuristics
- Luba heuristiline töötlemine. See suvand on vaja
määrata, et mis tahes heuristiline töötlemine
toimida saaks.
- --html-unwrap-factor
- Scale used to determine the length at which a line should be unwrapped.
Valid values are a decimal between 0 and 1. The default is 0.4, just below
the median line length. If only a few lines in the document require
unwrapping this value should be reduced
- --replace-scene-breaks
- Replace scene breaks with the specified text. By default, the text from
the input document is used.
Muuda dokumendi teksti ja struktuuri, kasutades
kasutajamääratud mustreid.
- --search-replace
- Path to a file containing search and replace regular expressions. The file
must contain alternating lines of regular expression followed by
replacement pattern (which can be an empty line). The regular expression
must be in the Python regex syntax and the file must be UTF-8
encoded.
- --sr1-replace
- Replacement to replace the text found with sr1-search.
- --sr1-search
- Search pattern (regular expression) to be replaced with sr1-replace.
- --sr2-replace
- Replacement to replace the text found with sr2-search.
- --sr2-search
- Search pattern (regular expression) to be replaced with sr2-replace.
- --sr3-replace
- Replacement to replace the text found with sr3-search.
- --sr3-search
- Search pattern (regular expression) to be replaced with sr3-replace.
ÜLESEHITUSE TUVASTUS
Kontrolli dokumendi ülesehituse automaatset
tuvastamist.
- --chapter
- An XPath expression to detect chapter titles. The default is to consider
<h1> or <h2> tags that contain the words
"chapter", "book",
"section", "prologue",
"epilogue" or "part" as
chapter titles as well as any tags that have
class="chapter". The expression used must evaluate
to a list of elements. To disable chapter detection, use the expression
"/". See the XPath Tutorial in the calibre User
Manual for further help on using this feature.
- --chapter-mark
- Specify how to mark detected chapters. A value of
"pagebreak" will insert page breaks before
chapters. A value of "rule" will insert a line
before chapters. A value of "none" will disable
chapter marking and a value of "both" will use
both page breaks and lines to mark chapters.
- --disable-remove-fake-margins
- Some documents specify page margins by specifying a left and right margin
on each individual paragraph. calibre will try to detect and remove these
margins. Sometimes, this can cause the removal of margins that should not
have been removed. In this case you can disable the removal.
- --insert-metadata
- Insert the book metadata at the start of the book. This is useful if your
e-book reader does not support displaying/searching metadata
directly.
- --page-breaks-before
- XPath avaldis. Määratletud elementide ette sisestatakse
lehepiir. Keelamiseks kasuta avaldist: /
- --remove-first-image
- Remove the first image from the input e-book. Useful if the input document
has a cover image that is not identified as a cover. In this case, if you
set a cover in calibre, the output document will end up with two cover
images if you do not specify this option.
- --start-reading-at
- An XPath expression to detect the location in the document at which to
start reading. Some e-book reading programs (most prominently the Kindle)
use this location as the position at which to open the book. See the XPath
tutorial in the calibre User Manual for further help using this
feature.
Kontrolli sisukorra automaatset loomist. Vaikimisi, kui
lähtefailis on sisukord olemas, siis eelistatakse seda automaatselt
loodavale sisukorrale.
- --duplicate-links-in-toc
- When creating a TOC from links in the input document, allow duplicate
entries, i.e. allow more than one entry with the same text, provided that
they point to a different location.
- --level1-toc
- XPath expression that specifies all tags that should be added to the Table
of Contents at level one. If this is specified, it takes precedence over
other forms of auto-detection. See the XPath Tutorial in the calibre User
Manual for examples.
- --level2-toc
- XPath expression that specifies all tags that should be added to the Table
of Contents at level two. Each entry is added under the previous level one
entry. See the XPath Tutorial in the calibre User Manual for
examples.
- --level3-toc
- XPath expression that specifies all tags that should be added to the Table
of Contents at level three. Each entry is added under the previous level
two entry. See the XPath Tutorial in the calibre User Manual for
examples.
- --max-toc-links
- Maximum number of links to insert into the TOC. Set to 0 to disable.
Default is: 50. Links are only added to the TOC if less than the threshold
number of chapters were detected.
- --toc-filter
- Eemalda sisukorrast kirjed, mille pealkiri vastab
määratletud regulaaravaldisele. Eemaldatakse kõik
vastavad kirjed ja nende alamkirjed.
- --toc-threshold
- Kui tuvastatakse sellest arvust vähem peatükke, siis
lisatakse lingid sisukorda. Vaikimisi: 6
- --use-auto-toc
- Normally, if the source file already has a Table of Contents, it is used
in preference to the auto-generated one. With this option, the
auto-generated one is always used.
Suvandid metaandmete määramiseks
väljundis
- --authors
- Määra autorid. Mitme autori puhul tuleks need eraldada
ja-märgiga &.
- Määra e-raamatu kirjeldus.
- --cover
- Set the cover to the specified file or URL
- --pubdate
- Määra avaldamiskuupäev (eeldatakse olevat kohalikus
ajavööndis, kui ajavööndit eraldi ei
määrata)
- --rating
- Määra hinnang. Peaks olema number vahemikus 1-st 5-ni.
- --series
- Määra, millissesse sarja see e-raamat kuulub.
- --series-index
- Määra, mitmes raamat see sarjas on.
- --tags
- Määra raamatu sildid. Peaks olema komaga eraldatud
loend.
- --timestamp
- Määra raamatu ajamärge (ei kasutata enam
kusagil)
- --title-sort
- Sortimisel kasutatav versioon pealkirjast.
Suvandid teisendamise vigade otsinguga abistamiseks
- --debug-pipeline,
-d
- Save the output from different stages of the conversion pipeline to the
specified directory. Useful if you are unsure at which stage of the
conversion process a bug is occurring.
- --verbose,
-v
- Level of verbosity. Specify multiple times for greater verbosity.
Specifying it twice will result in full verbosity, once medium verbosity
and zero times least verbosity.