visir_old_spc_wcal_ech - Old DRS detector: Spectroscopic
wavelength calibration recipe in Echelle
esorex visir_old_spc_wcal_ech [OPTIONS] FILE.sof
This recipe estimates the dispersion relation using the
atmospheric spectrum in a grism spectroscopy half-cycle frame.
The files listed in the Set Of Frames (sof-file) must be tagged:
VISIR-Echelle-Spectroscopy-file.fits SPEC_CAL_HRG_WCAL
VISIR-Quantum-Efficiency-Calibration-file.fits SPEC_CAL_QEFF
VISIR-Atmospheric-Emission-Lines-Calibration-file.fits SPEC_CAL_LINES
Additionally, a bad pixel map with a PRO.CATG of SPEC_BPM may be
added to the Set Of Frames with tag: BPM.
- --auto_bpm
<bool>
- Automatic detection and correction of bad pixels (bool; default: True).
The full name of this option for the EsoRex configuration file is
visir.visir_old_spc_wcal_ech.auto_bpm [default = True].
- --plot
<int>
- The recipe can produce a number of predefined plots. Zero means that none
of the plots are produced, while increasing values (e.g. 1 or 2) increases
the number of plots produced. If the plotting fails a warning is produced,
and the recipe continues. The default behaviour of the plotting is to use
gnuplot (with option -persist). The recipe currently produces 1D-plots
using gnuplot commands. The recipe user can control the actual
plotting-command used by the recipe to create the plot by setting the
environment variable CPL_PLOTTER. Currently, if CPL_PLOTTER is set it must
contain the string ´gnuplot´. Setting it to ´cat >
my_gnuplot_$$.txt´ causes a number of ASCII-files to be created,
which each produce a plot when given as standard input to gnuplot (e.g.
later or on a different computer). A finer control of the plotting options
can be obtained by writing an executable script, e.g. my_gnuplot.pl, that
executes gnuplot after setting the desired gnuplot options (e.g. set
terminal pslatex color) and then setting CPL_PLOTTER to my_gnuplot.pl. The
predefined plots include plotting of images. Images can be plotted not
only with gnuplot, but also using the pnm format. This is controlled with
the environment variable CPL_IMAGER. If CPL_IMAGER is set to a string that
does not contain the word gnuplot, the recipe will generate the plot in
pnm format. E.g. setting CPL_IMAGER to ´display - &´
will produce a gray-scale image using the image viewer display. (int;
default: 0). The full name of this option for the EsoRex configuration
file is visir.visir_old_spc_wcal_ech.plot [default =
0].
- --slit_skew
<float>
- Distortion correction: Skew of slit (degrees) (clockwise) (float; default:
0.0). The full name of this option for the EsoRex configuration file is
visir.visir_old_spc_wcal_ech.phi [default = 0.0].
- --spectrum_skew
<float>
- Distortion correction: LMR Skew of spectrum (degrees) (counter-
clockwise). Not used in High Resolution (float; default: 0.0). The full
name of this option for the EsoRex configuration file is
visir.visir_old_spc_wcal_ech.ksi [default = 0.0].
- --vert_arc
<float>
- Distortion correction: LR Detector vertical curvature (pixel). Reduced by
a factor 4 in MR. Not used in HR A-side. Increased by a factor 115/52 in
HR B-side (float; default: 0.0). The full name of this option for the
EsoRex configuration file is visir.visir_old_spc_wcal_ech.eps
[default = 0.0].
- --hori_arc
<float>
- Distortion correction: LMR Detector horizontal curvature (pixel).
Increased by a factor 1.5 in HR A-side. Reduced by a factor 2 in HR B-side
(float; default: 0.0). The full name of this option for the EsoRex
configuration file is visir.visir_old_spc_wcal_ech.delta [default =
0.0].
- --orderoffset
<int>
- Echelle order offset. The offset is relative to the main order. The
allowed range of offsets depend on the selected grism. The offset can
never exceed +/-4. If the main order is e.g. 8 an order offset of +1 will
cause the recipe to base the data reduction on order 9. With a positive
order offset the central wavelength becomes smaller while for a negative
order offset the central wavelength becomes larger. (int; default: 0). The
full name of this option for the EsoRex configuration file is
visir.visir_old_spc_wcal_ech.orderoffset [default = 0].
- --rl
<int>
- Reject leftmost columns in spectrum extraction, zero means all columns on
the left are used. In cross-dispersion mode a (small) negative number may
be used (pixel) (int; default: 0). The full name of this option for the
EsoRex configuration file is
visir.visir_old_spc_wcal_ech.reject_left [default = 0].
- --rr
<int>
- Reject rightmost columns in spectrum extraction, zero means all columns on
the right are used. In cross-dispersion mode a (small) negative number may
be used (pixel) (int; default: 0). The full name of this option for the
EsoRex configuration file is
visir.visir_old_spc_wcal_ech.reject_right [default = 0].
Note that it is possible to create a configuration file containing
these options, along with suitable default values. Please refer to the
details provided by the 'esorex --help' command.
The full documentation for the visir pipeline can be downloaded as
a PDF file using the following URL:
- ftp://ftp.eso.org/pub/dfs/pipelines/visir/visir-pipeline-manual-1.4.pdf
An overview over the existing ESO pipelines can be found on the
web page https://www.eso.org/sci/software/pipelines/.
Basic documentation about the EsoRex program can be found at the
esorex (1) man page.
It is possible to call the pipelines from python using the
python-cpl package. See
https://packages.python.org/python-cpl/index.html for further
information.
The other recipes of the visir pipeline are
visir_img_dark(7), visir_img_ff(7),
visir_img_reduce(7), visir_img_trans(7),
visir_old_img_combine(7), visir_old_img_phot(7),
visir_old_spc_obs(7), visir_old_spc_obs_ech(7),
visir_old_spc_phot(7), visir_old_spc_phot_ech(7),
visir_old_spc_wcal(7), visir_old_util_destripe(7),
visir_spc_reduce(7), visir_util_apply_calib(7),
visir_util_clip(7), visir_util_convert_weight(7),
visir_util_detect_shift(7), visir_util_img_std_cat(7),
visir_util_join(7), visir_util_qc(7),
visir_util_repack(7), visir_util_run_swarp(7),
visir_util_spc_std_cat(7), visir_util_spc_txt2fits(7),
visir_util_undistort(7)
visir_old_spc_wcal_ech 4.3.7
Lars Lundin <usd-help@eso.org>
Please report any problems to usd-help@eso.org. Alternatively, you
may send a report to the ESO User Support Department
<usd-help@eso.org>.
This file is part of the VISIR Instrument Pipeline Copyright (C)
2004, 2005 European Southern Observatory
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or (at your
option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software Foundation,
Inc., 51 Franklin St, Fifth Floor, Boston, MA 02111-1307 USA