xsh_mflat - Create the master flat and the orders edges traces
table frames
esorex xsh_mflat [OPTIONS] FILE.sof
This recipe creates the master flat and the orders edges traces
table frames.
Input Frames :
- [UVB] A set of n RAW frames (Format = RAW, n>=3, Tag = FLAT_D2_mode_UVB,
mode=SLIT/IFU)
- [UVB] A set of n RAW frames (Format = RAW, n>=3, Tag =
FLAT_QTH_mode_UVB)
- [VIS] A set of n RAW frames (Format = RAW, n>=3, Tag = FLAT_mode_VIS)
- [NIR] A set of n x n RAW frames ((Format = RAW, n>=3, Tag =
FLAT_mode_NIR_ON, FLAT_mode_NIR_OFF)
- A spectral format table (Format = PRE, Tag = SPECTRAL_FORMAT_TAB_arm)
- An order table (Format = TABLE, Tag = ORDER_TAB_CENTR_arm)
- [UVB,VIS] A master bias (Format = PRE, Tag = MASTER_BIAS_arm)
- [OPTIONAL] A map of reference bad pixel (Format = QUP,RAW, Tag =
BP_MAP_RP_arm)
- [OPTIONAL] A map of non linear pixel (Format = QUP,RAW, Tag =
BP_MAP_NL_arm)
- [OPTIONAL,UVB,VIS] A master dark (Format = PRE, Tag = MASTER_DARK_arm)
Products :
- An updated order table with edge UP and edge LOW (Format = TABLE, TAG =
ORDER_TAB_EDGES_mode_arm)
- A master flat (Format = PRE, PRO.CATG = MASTER_FLAT_mode_arm)
- The inter-order background frame (Format = PRE, PRO.CATG =
MFLAT_BACK_mode_arm)
- The inter-order background sampling points grid table
(Format = PRE, PRO.CATG = MFLAT_GRID_BACK_mode_arm)
Prepare the flat frames.
Stack and sigma clip all the flat frames.
Subtract master bias.
Subtract master dark.
Detect order edge.
Subtract background.
Create the Master Flat.
- --keep-temp
<str>
- If ´no´, temporary files are deleted. (str; default:
´no´). The full name of this option for the EsoRex
configuration file is xsh.xsh_mflat.keep-temp [default =
no].
- --debug-level
<str>
- Additional xshooter debug level. One of ´none´,
´low´, ´medium´, ´high´ (str;
default: ´none´). The full name of this option for the
EsoRex configuration file is xsh.xsh_mflat.debug-level [default =
none].
- --time-stamp
<bool>
- Add timestamp to product file name. (bool; default: False). The full name
of this option for the EsoRex configuration file is
xsh.xsh_mflat.time-stamp [default = False].
- --decode-bp
<int>
- Integer representation of the bits to be considered bad when decoding the
bad pixel mask pixel values. Most frequent codes relevant for the user: 0:
good pixel, 8: pick-up noise, 16: cosmic-ray removed, 32: cosmic-ray
unremoved, 128: calibration file defect, 256: hot pixel, 512: dark pixel,
4096: A/D converted saturation, 32768: non linear pixel, 1048576:
extrapolated flux in NIR, 4194304: Interpolated flux during extraction.
(int; default: 2144337919). The full name of this option for the EsoRex
configuration file is xsh.xsh_mflat.decode-bp [default =
2144337919].
- --pre-overscan-corr
<int>
- pre-overscan correction.0: no correction1: mean overscan correction2: mean
prescan correction3: (mean pre+mean overscan)/2 correction (int; default:
1). The full name of this option for the EsoRex configuration file is
xsh.xsh_mflat.pre-overscan-corr [default = 1].
- --stack-method
<str>
- Method used to build master frame. (str; default: ´median´).
The full name of this option for the EsoRex configuration file is
xsh.xsh_mflat.stack-method [default = median].
- --klow
<float>
- Kappa used to clip low level values, when method is set to
´mean´ (float; default: 5.0). The full name of this option
for the EsoRex configuration file is xsh.xsh_mflat.klow [default =
5.0].
- --khigh
<float>
- Kappa used to clip high level values, when method is set to
´mean´ (float; default: 5.0). The full name of this option
for the EsoRex configuration file is xsh.xsh_mflat.khigh [default =
5.0].
- --detectorder-edges-search-win-hsize
<int>
- During extraction the local spatial profile (=cross-order) of the spectrum
is determined by collapsing the 2-dimensional spectrum along the
dispersion axis. This parameter defines the half size of the region across
which the spectrum is collapsed. This parameter affects flagged pixels
interpolation. In case of spectrum gaps the recommended optimal value is:
(size_of_gap [nm]/(2*size_of_pixel [nm])+1) (int; default: 50). The full
name of this option for the EsoRex configuration file is
xsh.xsh_mflat.detectorder-edges-search-win-hsize [default =
50].
- --detectorder-edges-flux-thresh
<float>
- Threshold in relative flux (compared to the central flux) below which the
order edges are defined (float; default: 0.4). The full name of this
option for the EsoRex configuration file is
xsh.xsh_mflat.detectorder-edges-flux-thresh [default =
0.4].
- --detectorder-min-sn
<float>
- Minimum signal-to-noise ratio at the centroid of the orders (60 for
SLIT-UVB,VIS,NIR, 20 for IFU-UVB,VIS, 4 for IFU-NIR (float; default:
-1.0). The full name of this option for the EsoRex configuration file is
xsh.xsh_mflat.detectorder-min-sn [default = -1.0].
- --detectorder-min-order-size-x
<int>
- Minimum order size in pixels along X direction [60 for UVB,VIS, 40 for
NIR] (int; default: -1). The full name of this option for the EsoRex
configuration file is xsh.xsh_mflat.detectorder-min-order-size-x
[default = -1].
- --detectorder-chunk-half-size
<int>
- Half size in pixels of the chunks in Y direction (int; default: 1). The
full name of this option for the EsoRex configuration file is
xsh.xsh_mflat.detectorder-chunk-half-size [default =
1].
- --detectorder-slitlet-low-factor
<float>
- Factor for slitlet on lower edge slitlet (IFU) (float; default: 1.0). The
full name of this option for the EsoRex configuration file is
xsh.xsh_mflat.detectorder-slitlet-low-factor [default =
1.0].
- --detectorder-slitlet-up-factor
<float>
- Factor for slitlet on upper edge (IFU) (float; default: 1.0). The full
name of this option for the EsoRex configuration file is
xsh.xsh_mflat.detectorder-slitlet-up-factor [default =
1.0].
- --detectorder-fixed-slice
<bool>
- If true the size of slitlet is fixed (IFU) (bool; default: True). The full
name of this option for the EsoRex configuration file is
xsh.xsh_mflat.detectorder-fixed-slice [default = True].
- --detectorder-slice-trace-method
<str>
- method adopted for IFU slice tracing (´fixed´ for SLIT and
´sobel´ for IFU): (str; default: ´auto´). The
full name of this option for the EsoRex configuration file is
xsh.xsh_mflat.detectorder-slice-trace-method [default =
auto].
- --detectorder-qc-mode
<bool>
- If true allows one to skip edge detection on orders below detectorder-
min-sn (oly for QC mode, not to be set by normal users) (bool; default:
False). The full name of this option for the EsoRex configuration file is
xsh.xsh_mflat.detectorder-qc-mode [default = False].
- --detectorder-d2-min-sn
<float>
- minimum signal noise ratio in D2 lamp frame in order (float; default:
60.0). The full name of this option for the EsoRex configuration file is
xsh.xsh_mflat.detectorder-d2-min-sn [default = 60.0].
- --background-edges-margin
<int>
- X margin to order edge to define background sampling points (int; default:
1). The full name of this option for the EsoRex configuration file is
xsh.xsh_mflat.background-edges-margin [default = 1].
- --background-poly-deg-y
<int>
- Poly mode fit deg along Y. (int; default: 9). The full name of this option
for the EsoRex configuration file is
xsh.xsh_mflat.background-poly-deg-y [default = 9].
- --background-poly-deg-x
<int>
- Poly mode fit deg along X. (int; default: 9). The full name of this option
for the EsoRex configuration file is
xsh.xsh_mflat.background-poly-deg-x [default = 9].
- --background-poly-kappa
<float>
- Poly mode kappa value of kappa-sigma-clip outliers removal. (float;
default: 10.0). The full name of this option for the EsoRex configuration
file is xsh.xsh_mflat.background-poly-kappa [default =
10.0].
Note that it is possible to create a configuration file containing
these options, along with suitable default values. Please refer to the
details provided by the 'esorex --help' command.
The full documentation for the xshoo pipeline can be downloaded as
a PDF file using the following URL:
- ftp://ftp.eso.org/pub/dfs/pipelines/xshoo/xshoo-pipeline-manual-12.1.pdf
An overview over the existing ESO pipelines can be found on the
web page https://www.eso.org/sci/software/pipelines/.
Basic documentation about the EsoRex program can be found at the
esorex (1) man page.
It is possible to call the pipelines from python using the
python-cpl package. See
https://packages.python.org/python-cpl/index.html for further
information.
The other recipes of the xshoo pipeline are xsh_2dmap(7),
xsh_cfg_recover(7), xsh_flexcomp(7), xsh_geom_ifu(7),
xsh_lingain(7), xsh_mbias(7), xsh_mdark(7),
xsh_orderpos(7), xsh_predict(7),
xsh_respon_slit_nod(7), xsh_respon_slit_offset(7),
xsh_respon_slit_stare(7), xsh_scired_ifu_offset(7),
xsh_scired_ifu_offset_drl(7), xsh_scired_ifu_stare(7),
xsh_scired_ifu_stare_drl(7), xsh_scired_slit_nod(7),
xsh_scired_slit_offset(7), xsh_scired_slit_stare(7),
xsh_util_physmod(7), xsh_wavecal(7)
P.Goldoni, L.Guglielmi, R. Haigron, F. Royer, D. Bramich, A.
Modigliani <amodigli@eso.org>
Please report any problems to amodigli@eso.org. Alternatively, you
may send a report to the ESO User Support Department
<usd-help@eso.org>.
This file is part of the X-shooter Instrument Pipeline Copyright
(C) 2006 European Southern Observatory
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or (at your
option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software Foundation,
Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA