| Functional selectors in Cupt(7) | Miscellaneous Information Manual | Functional selectors in Cupt(7) |
cupt_functionselectors - syntax of functional selectors in cupt package manager
Functional selectors are used for fine-grained selection of versions. While standard mechanisms provide a way to select versions by package name, version string and/or distribution, functional selectors embed a microlanguage to select versions by their various properties.
Functional selector expression (FSE) consists of function name and list of arguments:
'function_name(argument1, argument2, ... argumentN)'
Every argument can be a FSE itself or a string. Arguments are separated by the comma (,). Additional whitespace characters (space, tab, newline) are allowed (and ignored by parser) anywhere except between the function name and the opening bracket.
If the argument is a string and contains commas or round brackets, the argument should be quoted by placing the / character around it ('/argument/').
If the function receives no arguments, arguments bracked may be omitted: 'function_name' is an equivalent to 'function_name()'.
The expression 'argument1 & argument2 & ... & argumentN' is a special short form for 'and(argument1, argument2, ... argumentN)'. Similarly, the expression 'argument1 | argument2 | ... | argumentN' is a special short form for 'or(argument1, argument2, ... argumentN)'
Receive FSEs as arguments.
| Function name and arguments | Argument count | Returns versions which... |
| and(fse1, fse2, ... fseN) | ≥ 1 | satisfy all of the fse1..fseN |
| or(fse1, fse2, ... fseN) | ≥ 1 | satisfy any of the fse1..fseN |
| not(fse) | 1 | don't satisfy fse |
| xor(fse1, fse2) | 2 | satisfy either fse1 or fse2 but not both |
| Function name and arguments | Short alias | Returns versions which... | Notes |
| package:name(regex) | Pn | package name matches regex | |
| package:installed() | Pi | belong to to installed packages | applies only to binary versions |
| package:automatically-installed() | Pai | belong to automatically installed packages | applies only to binary versions |
Apply to source and binary versions.
| Function name and arguments | Short alias | Returns versions which... |
| version(regex) | v | version string matches regex |
| maintainer(regex) | m | maintainer matches regex |
| priority(regex) | p | priority matches regex |
| section(regex) | s | section matches regex |
| trusted() | t | come from at least one release with a valid cryptographic signature |
| field(field_name, regex) | f | value¹ of the non-standard (not recognized by Cupt) field field_name matches regex |
¹If the version does not contain a field field_name, its value is assumed being empty string; and it can still match if regular expression matches empty string.
Functions from this family receive one string argument (regex) and return versions which come from at least one release where property (see the following table) matches the regular expression regex.
| Function name | Short alias | Property |
| release:archive | Ra | archive |
| release:codename | Rn | codename |
| release:component | Rc | component |
| release:version | Rv | version |
| release:vendor | Ro | vendor |
| release:origin | Ru | origin (base URI) |
Apply only to binary versions.
| Function name and arguments | Short alias | Returns versions which... |
| source-package(regex) | sp | source package matches regex |
| source-version(regex) | sv | source version string matches regex |
| essential() | e | have 'Essential' flag set |
| important() | have 'Important' flag set | |
| installed() | i | are installed in the system |
| description(regex) | d | description matches regex |
| provides(regex) | o | provides at least one virtual package which matches regex |
Apply only to source versions.
| Function name and arguments | Short alias | Returns versions which... |
| uploaders(regex) | u | have at least one uploader which matches regex |
Apply only to binary versions.
Functions from this family receive one FSE-argument (fse) and return all versions which satisfy the dependency of type relation type for fse (see the following table).
| Function name | Short alias | Relation type |
| pre-depends | Ypd | Pre-Depends |
| depends | Yd | Depends |
| recommends | Yr | Recommends |
| suggests | Ys | Suggests |
| enhances | Ye | Enhances |
| conflicts | Yc | Conflicts |
| breaks | Yb | Breaks |
| replaces | Yrp | Replaces |
Functions from this family receive one FSE-argument (fse) and return all versions for which at least one version from fse satisfies the dependency of type relation type (see the following table).
| Function name | Short alias | Relation type |
| reverse-pre-depends | YRpd | Pre-Depends |
| reverse-depends | YRd | Depends |
| reverse-recommends | YRr | Recommends |
| reverse-suggests | YRs | Suggests |
| reverse-enhances | YRe | Enhances |
| reverse-conflicts | YRc | Conflicts |
| reverse-breaks | YRb | Breaks |
| reverse-replaces | YRrp | Replaces |
Apply only to source versions and return binary versions.
Functions from this family receive one FSE-argument (fse) and return all versions which satisfy the build-time dependency of type relation type for fse (see the following table).
| Function name | Short alias | Relation type |
| build-depends | Zbd | Build-Depends |
| build-depends-indep | Zbdi | Build-Depends-Indep |
| build-depends-arch | Build-Depends-Arch | |
| build-conflicts | Zbc | Build-Conflicts |
| build-conflicts-indep | Zbci | Build-Conflicts-Indep |
| build-conflicts-arch | Build-Conflicts-Arch |
Apply only to binary versions and return source versions.
Functions from this family receive one FSE-argument (fse) and return all versions for which at least one version from fse satisfies the build-dependency of type relation type (see the following table).
| Function name | Short alias | Relation type |
| reverse-build-depends | ZRbd | Build-Depends |
| reverse-build-depends-indep | ZRbdi | Build-Depends-Indep |
| reverse-build-depends-arch | Build-Depends-Arch | |
| reverse-build-conflicts | ZRbc | Build-Conflicts |
| reverse-build-conflicts-indep | ZRbci | Build-Conflicts-Indep |
| reverse-build-conflicts-arch | Build-Conflicts-Arch |
The function with defines a user function with no parameters which can be used as FSE-argument in the subexpression.
Syntax:
with(function_name, function_expression, subexpression)
| Argument | Meaning |
| function_name | user-defined function name, must start with an underscore (_) |
| function_expression | FSE, function value |
| subexpression | FSE which the defined function can be used in |
This function returns the value of subexpression.
The function recursive defines a recursive transformation FSE.
Syntax:
recursive(subresult_function_name, initial_subresult, iterating_expression)
| Argument | Meaning |
| subresult_function_name | user-defined function name, must start with an underscore (_) |
| initial_subresult | FSE, initial value of subresult_function_name |
| subexpression | FSE to compute on each recurse iteration, which subresult_function_name to be used in |
The function works as follows:
The function fmap applies many functions to the same expression and combines their results.
The expression
fmap(fse, function_name_1, ..., function_name_N)
is equivalent to
or(function_name_1(fse), ..., function_name_N(fse))
| Function name and arguments | Value |
| best(fse) | filters out those versions from fse for which there are another version of the same package and higher pin |
| binary-to-source(binary_fse) | converts binary versions, selected by binary_fse, to their corresponding source versions |
| source-to-binary(source_fse) | converts source versions, selected by source_fse, to lists of their corresponding binary versions |
| 20181210 | Eugene V. Lyubimkin |