cyclades-serial-client(8) | cyclades-serial-client(8) |
cyclades-serial-client Serial Port Interface for Cyclades Terminal Servers
cyclades-serial-client (start | stop | restart | status) [devname]
For each physical port listed in cyclades-devices file, cyclades-serial-client controls the status of the corresponding cyclades-ser-cli interface.
cyclades-serial-client must be invoked with one of the (start, stop, restart or status), and optionaly with a argument associated to a specific device. In this case, the action spedified as the option will be performed only for this device.
If this argument was not supplied, the action will be performed for all devices listed in cyclades-devices file. The mandatory options are:
Assuming the the following cyclades-devices file configuration:
/dev/ctty01:pr3k:1:rtelnet: /dev/ctty02:pr3k:2:socket:
1 . Start all devices: cyclades-serial-client start Messages: "Starting /dev/ctty01 <==> pr3k:1 interface" "Starting /dev/ctty02 <==> pr3k:2 interface"
2 . Try to start them again: cyclades-serial-client start Messages: "cyclades-serial-client : /dev/ctty01 already active" "cyclades-serial-client : /dev/ctty02 already active"
3 . Stop only /dev/ctty01 device: cyclades-serial-client stop /dev/ctty01 Messages: "Stopping /dev/ctty01 <==> pr3k:2 interface"
4 . Checking status: cyclades-serial-client status Messages: "/dev/ctty01 (rtelnet at pr3k:1) is inactive" "/dev/ctty02 ( socket at pr3k:2) active, pid 2983"
5 . Start a non-valid device cyclades-serial-client start /dev/xtty01 Messages: "cyclades-serial-client : device /dev/xtty01 does not exist"