DATEROUND(1) | User Commands | DATEROUND(1) |
dateround - Round DATE/TIME to the next occurrence of RNDSPEC.
dateround [OPTION]... [DATE/TIME] RNDSPEC...
Round DATE/TIME to the next occurrence of RNDSPEC.
If DATE/TIME is omitted a stream of date/times is read from stdin.
DATE/TIME can also be one of the following specials
- `now' interpreted as the current (UTC) time stamp
- `time' the time part of the current (UTC) time stamp
- `today' the current date (according to UTC)
- `tomo[rrow]' tomorrow's date (according to UTC)
- `y[ester]day' yesterday's date (according to UTC)
RNDSPECs can be month names (Jan, Feb, ...), weekday names (Sun, Mon, ...), or days. If a month name the next date/time relative to DATE/TIME is returned whose month part matches the value given, so e.`g. dround 2012-01-01 Feb' will return 2012-02-01. If a weekday name is given, the next date/time after DATE/TIME whose weekday part matches the values given is returned. If a day, the next date/time after DATE/TIME whose day part matches is returned, so `dround 2012-01-15 1' will return 2012-02-01.
RNDSPECs can also be multiples of the day dividing units, e.g 1h rounds to the nearest full hour, 30m to the nearest half hour, and 10s to the next 10s mark.
To round to the previous occurrence of a RNDSPEC any argument can be prefixed with a `-' to denote that. E.g. `dround 2012-02-14 -1' will return 2012-02-01. And `dround 2012-02-11 -- -Sep' will return 2011-09-11.
Multiple RNDSPECs are evaluated left to right.
Note that rounding isn't commutative, e.g. 2012-03-01 Sat Sep -> 2012-09-03 vs. 2012-03-01 Sep Sat -> 2012-09-01
Note that non-numeric strings prefixed with a `-' conflict with the command line options and a separating `--' has to be used.
Recognized OPTIONs:
Format specs in dateutils are similar to posix' strftime().
However, due to a broader range of supported calendars dateutils must employ different rules.
Date specs:
%a The abbreviated weekday name
%A The full weekday name
%_a The weekday name shortened to a single character (MTWRFAS)
%b The abbreviated month name
%B The full month name
%_b The month name shortened to a single character (FGHJKMNQUVXZ)
%c The count of the weekday within the month (range 00 to 05)
%C The count of the weekday within the year (range 00 to 53)
%d The day of the month, 2 digits (range 00 to 31)
%D The day of the year, 3 digits (range 000 to 366)
%F Equivalent to %Y-%m-%d (ymd's canonical format)
%g ISO week date year without the century (range 00 to 99)
%G ISO week date year including the century
%j Equivalent to %D
%m The month in the current calendar (range 00 to 19)
%Q The quarter of the year (range Q1 to Q4)
%q The number of the quarter (range 01 to 04)
%s The number of seconds since the Epoch.
%u The weekday as number (range 01 to 07, Sunday being 07)
%U The week count, day of week is Sun (range 00 to 53)
%V The ISO week count, day of week is Mon (range 01 to 53)
%w The weekday as number (range 00 to 06, Sunday being 00)
%W The week count, day of week is Mon (range 00 to 53)
%y The year without a century (range 00 to 99)
%Y The year including the century
%_y The year shortened to a single digit
%Z The zone offset in hours and minutes (HH:MM) with
a preceding sign (+ for offsets east of UTC, - for offsets
west of UTC)
%Od The day as roman numerals
%Om The month as roman numerals
%Oy The two digit year as roman numerals
%OY The year including the century as roman numerals
%rs In time systems whose Epoch is different from the unix Epoch, this
selects the number of seconds since then.
%rY In calendars with years that don't coincide with the Gregorian
years, this selects the calendar's year.
%dth The day of the month as an ordinal number, 1st, 2nd, 3rd, etc.
%mth The month of the year as an ordinal number, 1st, 2nd, 3rd, etc.
%db The business day of the month (since last month's ultimo)
%dB Number of business days until this month's ultimo
Time specs:
%H The hour of the day using a 24h clock, 2 digits (range 00 to 23)
%I The hour of the day using a 12h clock, 2 digits (range 01 to 12)
%M The minute (range 00 to 59)
%N The nanoseconds (range 000000000 to 999999999)
%p The string AM or PM, noon is PM and midnight is AM.
%P Like %p but in lowercase
%S The (range 00 to 60, 60 is for leap seconds)
%T Equivalent to %H:%M:%S
General specs:
%n A newline character
%t A tab character
%% A literal % character
Modifiers:
%O Modifier to turn decimal numbers into Roman numerals
%r Modifier to turn units into real units
%0 Modifier to turn on zero prefixes
%SPC Modifier to turn on space prefixes
%- Modifier to turn off prefixes altogether
th Suffix, read and print ordinal numbers
b Suffix, treat days as business days
By design dates before 1601-01-01 are not supported.
For conformity here is a list of calendar designators and their corresponding format string:
ymd %Y-%m-%d
ymcw %Y-%m-%c-%w
ywd %rY-W%V-%u
bizda %Y-%m-%db
lilian n/a
ldn n/a
julian n/a
jdn n/a
matlab n/a
mdn n/a
These designators can be used as output format string, moreover, @code{lilian}/@code{ldn} and @code{julian}/@code{jdn} can also be used as input format string.
Some tools ("dadd", "dseq") need durations as their input. Durations are generally incompatible with input formats as specified by "-i|--input-format" and (at the moment) the input syntax is fixed.
The general format is "+-Nunit" where "+" or "-" is the sign, "N" a number, and "unit" the unit as discussed below.
Units:
s seconds
m minutes
h hours
rs real-life seconds, as in including leap transitions
d days
b business days
mo months
y years
$ dround 2012-03-01 2
2012-03-02
$
$ dround -n 2012-03-01 1
2012-04-01
$
$ dround 17:05:00 5m
17:05:00
$ dround 17:04:00 /5m
17:05:00
$
$ dround -n 17:04:00 4m
18:04:00
$ dround -n 17:04:00 /1m
17:05:00
$
Written by Sebastian Freundt <freundt@fresse.org>
Report bugs to: https://github.com/hroptatyr/dateutils/issues
The full documentation for dateround is maintained as a Texinfo manual. If the info and dateround programs are properly installed at your site, the command
should give you access to the complete manual.
April 2018 | dateutils 0.4.3 |