DOKK / manpages / debian 10 / dibbler-server / dibbler-server.8.en
dibbler-server(8) Dibbler dibbler-server(8)

dibbler-server - a portable DHCPv6 server

dibbler-server is a portable implementation of the DHCPv6 server. It supports both stateful (i.e. IPv6 address granting) and stateless (i.e. options granting) autoconfiguration. There are ports available for Linux 2.4/2.6 systems as well as MS Windows XP and 2003. They are freely available under GNU GPL version 2 (or later) license.

dibbler-server [ run | start | stop | status | install | uninstall ]

run - starts server in the console. Server can be closed using ctrl-c.

start - starts server in daemon mode.

stop - stops running server.

status - shows status of the server.

install - installs server as a service. This is not implemented yet.

uninstall - uninstall server service. This is not implemented yet.

Let's assume simple case: server should provide clients located on the eth1 link with IPv6 addresses from range 2000::100/120 and should have preference set to 7:

iface eth0

preference 7
pool 2000::100-2000::1ff
} }

Here is exmaple of server configured to work in a stateless mode (i.e. only options, not addresses are served). If client support option renewal, it should do so once in a 500 seconds:

log-level 7
log-mode short
iface eth0 {

option dns-server 2000::100,2000::101
option domain,
option ntp-server 2000::200,2000::201,2000::202
option time-zone CET
option sip-server 2000::300,2000::302,2000::303,2000::304
option sip-domain,
option nis-server 2000::400,2000::401,2000::404,2000::405,2000::405
option nis-domain
option nis+-server 2000::501,2000::502
option nis+-domain
option lifetime 500 }

More examples can be found in the User's Guide.

All files are created in the /var/lib/dibbler directory. Dibbler server reads /var/lib/dibbler/server.conf file. During operation, Dibbler saves various file in that directory. Log file is named client.log.

This implementation aims at conformance to the following standards:

RFC 3315 DHCP for IPv6

RFC 3319 SIP options for DHCPv6

RFC 3646 DNS server options for DHCPv6

RFC 3736 Stateless DHCPv6

RFC 3898 NIS options for DHCPv6

Also options specified in following drafts are implemented:

draft-ietf-dhc-dhcpv6-opt-timeconfig-03.txt NTP and timezone options.

draft-ietf-dhc-dhcpv6-opt-lifetime-00.txt Option renewal.

Bugs are tracked with bugzilla, available at If you belive you have found a bug, don't hesitate to report it.

Dibbler was developed as master thesis on the Technical University of Gdansk by Tomasz Mrugalski and Marek Senderski. Currently Marek has not enough free time, so this project is being developed by Tomasz Mrugalski. Authors can be reached at and

There is dibbler-client(8) manual page. You are also advised to take a look at project website located at As far as authors know, this is the only Windows DHCPv6 stateful implementation available. It is also one of two freely available under Linux. The other Linux implementation is available at, but it is rather outdated and seems not being actively developed.

2004-12-11 GNU