gnutv - a digital tv utility.
gnutv [options]<channelname>
This manual page documents briefly the gnutv commands.
gnutv is a digital tv utility.
- -adapter
<id>
- adapter to use (default 0)
- -frontend
<id>
- frontend to use (default 0)
- -demux
<id>
- demux to use (default 0)
- -caslotnum
<id>
- ca slot number to use (default 0)
- -channels
<filename>
- channels.conf file
- -secfile
<filename>
- Optional sec.conf file
- -secid
<secid>
- ID of the SEC configuration to use, one of: * UNIVERSAL (default) -
Europe, 10800 to 11800 MHz and 11600 to 12700 Mhz, Dual LO, loband 9750,
hiband 10600 MHz * DBS - Expressvu, North America, 12200 to 12700 MHz,
Single LO, 11250 MHz * STANDARD - 10945 to 11450 Mhz, Single LO, 10000
Mhz * ENHANCED - Astra, 10700 to 11700 MHz, Single LO, 9750 MHz * C-BAND
- Big Dish, 3700 to 4200 MHz, Single LO, 5150 Mhz * C-MULTI - Big Dish -
Multipoint LNBf, 3700 to 4200 MHz, Dual LO, H:5150MHz, V:5750MHz * One of
the sec definitions from the secfile if supplied
- -out decoder
- Output to hardware decoder (default)
- -out
decoderabypass
- Output to hardware decoder using audio bypass -out dvr Output
stream to dvr device -out null Do not output anything -out
stdout Output to stdout -out file <filename> Output
stream to file -out udp <address> <port> Output stream
to address:port using udp -out udpif <address> <port>
<interface> Output stream to address:port using udp forcing the
specified interface -out rtp <address> <port> Output
stream to address:port using udp-rtp -out rtpif <address>
<port> <interface> Output stream to address:port using
udp-rtp forcing the specified interface
- -timeout
<secs>
- Number of seconds to output channel for (0=>exit immediately after
successful tuning, default is to output forever)
- Show the CAM menu
- -nomoveca
- Do not attempt to move CA descriptors from stream to programme level
-h print this help text
This manual page was written by Uwe Bugla
<uwe.bugla@gmx.de>.