fence_ilo - Fence agent for HP iLO
fence_ilo2 - Fence agent for HP iLO2 (symlink)
fence_ilo is an I/O Fencing agent used for HP servers with the
Integrated Light Out (iLO) PCI card.The agent opens an SSL connection to the
iLO card. Once the SSL connection is established, the agent is able to
communicate with the iLO card through an XML stream.
fence_ilo accepts options on the command line as well as from
stdin. Fenced sends parameters through stdin when it execs the agent.
fence_ilo can be run by itself with command line options. This is useful for
testing and for turning outlets on or off from scripts.
Vendor URL: http://www.hp.com
- -o,
--action=[action]
- Fencing action (Default Value: reboot)
- -4, --inet4-only
- Forces agent to use IPv4 addresses only
- -6, --inet6-only
- Forces agent to use IPv6 addresses only
- -a, --ip=[ip]
- IP address or hostname of fencing device
- -u,
--ipport=[port]
- TCP/UDP port to use for connection with device (Default Value: 443)
- -t, --notls
- Disable TLS negotiation and force SSL3.0. This should only be used for
devices that do not support TLS1.0 and up.
- -p,
--password=[password]
- Login password or passphrase
- -S,
--password-script=[script]
- Script to run to retrieve password
- -n, --plug=[ip]
- IP address or hostname of fencing device (together with --port-as-ip)
- -r,
--ribcl-version=[version]
- Force ribcl version to use
- -z, --ssl
- Use SSL connection with verifying certificate (Default Value: 1)
- --ssl-insecure
- Use SSL connection without verifying certificate
- --ssl-secure
- Use SSL connection with verifying certificate
- --tls1.0
- Disable TLS negotiation and force TLS1.0. This should only be used for
devices that do not support TLS1.1 and up.
- -l,
--username=[name]
- Login name This parameter is always required.
- -q, --quiet
- Disable logging to stderr. Does not affect --verbose or --debug-file or
logging to syslog.
- -v, --verbose
- Verbose mode
- -D,
--debug-file=[debugfile]
- Write debug information to given file
- -V, --version
- Display version information and exit
- -h, --help
- Display help and exit
- --delay=[seconds]
- Wait X seconds before fencing is started (Default Value: 0)
- --login-timeout=[seconds]
- Wait X seconds for cmd prompt after login (Default Value: 10)
- --port-as-ip
- Make "port/plug" to be an alias to IP address
- --power-timeout=[seconds]
- Test X seconds for status change after ON/OFF (Default Value: 20)
- --power-wait=[seconds]
- Wait X seconds after issuing ON/OFF (Default Value: 0)
- --shell-timeout=[seconds]
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- --retry-on=[attempts]
- Count of attempts to retry power on (Default Value: 3)
- --gnutlscli-path=[path]
- Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)
- on
- Power on machine.
- off
- Power off machine.
- reboot
- Reboot machine.
- status
- This returns the status of the plug/virtual machine.
- monitor
- Check the health of fence device
- metadata
- Display the XML metadata describing this resource.
- manpage
-
The operational behavior of this is not known.
- validate-all
- Validate if all required parameters are entered.
- action
- Fencing action (Default Value: reboot)
- inet4_only
- Forces agent to use IPv4 addresses only
- inet6_only
- Forces agent to use IPv6 addresses only
- ip
- IP address or hostname of fencing device Obsoletes: ipaddr
- ipport
- TCP/UDP port to use for connection with device (Default Value: 443)
- notls
- Disable TLS negotiation and force SSL3.0. This should only be used for
devices that do not support TLS1.0 and up.
- password
- Login password or passphrase Obsoletes: passwd
- password_script
- Script to run to retrieve password Obsoletes: passwd_script
- plug
- IP address or hostname of fencing device (together with --port-as-ip)
Obsoletes: port
- ribcl_version
- Force ribcl version to use Obsoletes: ribcl
- ssl
- Use SSL connection with verifying certificate (Default Value: 1)
- ssl_insecure
- Use SSL connection without verifying certificate
- ssl_secure
- Use SSL connection with verifying certificate
- tls1.0
- Disable TLS negotiation and force TLS1.0. This should only be used for
devices that do not support TLS1.1 and up.
- username
- Login name This parameter is always required. Obsoletes: login
- quiet
- Disable logging to stderr. Does not affect --verbose or --debug-file or
logging to syslog.
- verbose
- Verbose mode
- debug_file
- Write debug information to given file Obsoletes: debug
- version
- Display version information and exit
- help
- Display help and exit
- delay
- Wait X seconds before fencing is started (Default Value: 0)
- login_timeout
- Wait X seconds for cmd prompt after login (Default Value: 10)
- port_as_ip
- Make "port/plug" to be an alias to IP address
- power_timeout
- Test X seconds for status change after ON/OFF (Default Value: 20)
- power_wait
- Wait X seconds after issuing ON/OFF (Default Value: 0)
- shell_timeout
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- retry_on
- Count of attempts to retry power on (Default Value: 3)
- gnutlscli_path
- Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)