fence_ilo5 - Fence agent for IPMI
fence_ilo3 - Fence agent for HP iLO3 (symlink)
fence_ilo4 - Fence agent for HP iLO4 (symlink)
fence_ilo5 - Fence agent for HP iLO5 (symlink)
fence_imm - Fence agent for IBM Integrated Management Module
(symlink)
fence_idrac - Fence agent for Dell iDRAC (symlink)
fence_ipmilan is an I/O Fencing agentwhich can be used with
machines controlled by IPMI.This agent calls support software ipmitool
(http://ipmitool.sf.net/). WARNING! This fence agent might report success
before the node is powered off. You should use -m/method onoff if your fence
device works correctly with that option.
fence_ilo5 accepts options on the command line as well as from
stdin. Fenced sends parameters through stdin when it execs the agent.
fence_ilo5 can be run by itself with command line options. This is useful
for testing and for turning outlets on or off from scripts.
Vendor URL:
- -o,
--action=[action]
- Fencing action (Default Value: reboot)
- -A, --auth=[auth]
- IPMI Lan Auth type. (md5|password|none)
- -C,
--cipher=[cipher]
- Ciphersuite to use (same as ipmitool -C parameter)
- --hexadecimal-kg=[key]
- Hexadecimal-encoded Kg key for IPMIv2 authentication
- -4, --inet4-only
- Forces agent to use IPv4 addresses only
- -6, --inet6-only
- Forces agent to use IPv6 addresses only
- -a, --ip=[ip]
- IP address or hostname of fencing device
- -u,
--ipport=[port]
- TCP/UDP port to use for connection with device (Default Value: 623)
- -P, --lanplus
- Use Lanplus to improve security of connection (Default Value: 1)
- -m,
--method=[method]
- Method to fence (onoff|cycle) (Default Value: onoff)
- -p,
--password=[password]
- Login password or passphrase
- -S,
--password-script=[script]
- Script to run to retrieve password
- -n, --plug=[ip]
- IP address or hostname of fencing device (together with --port-as-ip)
- -L,
--privlvl=[level]
- Privilege level on IPMI device (callback|user|operator|administrator)
(Default Value: administrator)
- --target=[targetaddress]
- Bridge IPMI requests to the remote target address
- -l,
--username=[name]
- Login name
- -q, --quiet
- Disable logging to stderr. Does not affect --verbose or --debug-file or
logging to syslog.
- -v, --verbose
- Verbose mode
- -D,
--debug-file=[debugfile]
- Write debug information to given file
- -V, --version
- Display version information and exit
- -h, --help
- Display help and exit
- --delay=[seconds]
- Wait X seconds before fencing is started (Default Value: 0)
- --ipmitool-path=[path]
- Path to ipmitool binary (Default Value: /usr/bin/ipmitool)
- --login-timeout=[seconds]
- Wait X seconds for cmd prompt after login (Default Value: 5)
- --port-as-ip
- Make "port/plug" to be an alias to IP address
- --power-timeout=[seconds]
- Test X seconds for status change after ON/OFF (Default Value: 20)
- --power-wait=[seconds]
- Wait X seconds after issuing ON/OFF (Default Value: 2)
- --shell-timeout=[seconds]
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- --retry-on=[attempts]
- Count of attempts to retry power on (Default Value: 1)
- --use-sudo
- Use sudo (without password) when calling 3rd party software
- --sudo-path=[path]
- Path to sudo binary (Default Value: /usr/bin/sudo)
- on
- Power on machine.
- off
- Power off machine.
- reboot
- Reboot machine.
- status
- This returns the status of the plug/virtual machine.
- monitor
- Check the health of fence device
- metadata
- Display the XML metadata describing this resource.
- manpage
-
The operational behavior of this is not known.
- validate-all
- Validate if all required parameters are entered.
- diag
- Pulse a diagnostic interrupt to the processor(s).
- action
- Fencing action (Default Value: reboot)
- auth
- IPMI Lan Auth type. (md5|password|none)
- cipher
- Ciphersuite to use (same as ipmitool -C parameter)
- hexadecimal_kg
- Hexadecimal-encoded Kg key for IPMIv2 authentication
- inet4_only
- Forces agent to use IPv4 addresses only
- inet6_only
- Forces agent to use IPv6 addresses only
- ip
- IP address or hostname of fencing device Obsoletes: ipaddr
- ipport
- TCP/UDP port to use for connection with device (Default Value: 623)
- lanplus
- Use Lanplus to improve security of connection (Default Value: 1)
- method
- Method to fence (onoff|cycle) (Default Value: onoff)
- password
- Login password or passphrase Obsoletes: passwd
- password_script
- Script to run to retrieve password Obsoletes: passwd_script
- plug
- IP address or hostname of fencing device (together with --port-as-ip)
Obsoletes: port
- privlvl
- Privilege level on IPMI device (callback|user|operator|administrator)
(Default Value: administrator)
- target
- Bridge IPMI requests to the remote target address
- username
- Login name Obsoletes: login
- quiet
- Disable logging to stderr. Does not affect --verbose or --debug-file or
logging to syslog.
- verbose
- Verbose mode
- debug_file
- Write debug information to given file Obsoletes: debug
- version
- Display version information and exit
- help
- Display help and exit
- delay
- Wait X seconds before fencing is started (Default Value: 0)
- ipmitool_path
- Path to ipmitool binary (Default Value: /usr/bin/ipmitool)
- login_timeout
- Wait X seconds for cmd prompt after login (Default Value: 5)
- port_as_ip
- Make "port/plug" to be an alias to IP address
- power_timeout
- Test X seconds for status change after ON/OFF (Default Value: 20)
- power_wait
- Wait X seconds after issuing ON/OFF (Default Value: 2)
- shell_timeout
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- retry_on
- Count of attempts to retry power on (Default Value: 1)
- use_sudo
- Use sudo (without password) when calling 3rd party software Obsoletes:
sudo
- sudo_path
- Path to sudo binary (Default Value: /usr/bin/sudo)