fence_powerman - Fence Agent for Powerman
This is a Pacemaker Fence Agent for the Powerman management
utility that was designed for LLNL systems.
fence_powerman accepts options on the command line as well as from
stdin. Fenced sends parameters through stdin when it execs the agent.
fence_powerman can be run by itself with command line options. This is
useful for testing and for turning outlets on or off from scripts.
Vendor URL: https://github.com/chaos/powerman
- -o,
--action=[action]
- Fencing action (Default Value: reboot)
- -4, --inet4-only
- Forces agent to use IPv4 addresses only
- -6, --inet6-only
- Forces agent to use IPv6 addresses only
- -a, --ip=[ip]
- IP address or hostname of fencing device
- -u,
--ipport=[port]
- TCP/UDP port to use for connection with device (Default Value: 10101)
- -n, --plug=[ip]
- IP address or hostname of fencing device (together with --port-as-ip)
- -q, --quiet
- Disable logging to stderr. Does not affect --verbose or --debug-file or
logging to syslog.
- -v, --verbose
- Verbose mode
- -D,
--debug-file=[debugfile]
- Write debug information to given file
- -V, --version
- Display version information and exit
- -h, --help
- Display help and exit
- --delay=[seconds]
- Wait X seconds before fencing is started (Default Value: 3)
- --login-timeout=[seconds]
- Wait X seconds for cmd prompt after login (Default Value: 5)
- --port-as-ip
- Make "port/plug" to be an alias to IP address
- --power-timeout=[seconds]
- Test X seconds for status change after ON/OFF (Default Value: 20)
- --power-wait=[seconds]
- Wait X seconds after issuing ON/OFF (Default Value: 3)
- --powerman-path=[path]
- Path to powerman binary (Default Value: /usr/bin/powerman)
- --shell-timeout=[seconds]
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- --retry-on=[attempts]
- Count of attempts to retry power on (Default Value: 1)
- on
- Power on machine.
- off
- Power off machine.
- reboot
- Reboot machine.
- status
- This returns the status of the plug/virtual machine.
- monitor
- Check the health of fence device
- metadata
- Display the XML metadata describing this resource.
- manpage
-
The operational behavior of this is not known.
- validate-all
- Validate if all required parameters are entered.
- action
- Fencing action (Default Value: reboot)
- inet4_only
- Forces agent to use IPv4 addresses only
- inet6_only
- Forces agent to use IPv6 addresses only
- ip
- IP address or hostname of fencing device Obsoletes: ipaddr
- ipport
- TCP/UDP port to use for connection with device (Default Value: 10101)
- plug
- IP address or hostname of fencing device (together with --port-as-ip)
Obsoletes: port
- quiet
- Disable logging to stderr. Does not affect --verbose or --debug-file or
logging to syslog.
- verbose
- Verbose mode
- debug_file
- Write debug information to given file Obsoletes: debug
- version
- Display version information and exit
- help
- Display help and exit
- delay
- Wait X seconds before fencing is started (Default Value: 3)
- login_timeout
- Wait X seconds for cmd prompt after login (Default Value: 5)
- port_as_ip
- Make "port/plug" to be an alias to IP address
- power_timeout
- Test X seconds for status change after ON/OFF (Default Value: 20)
- power_wait
- Wait X seconds after issuing ON/OFF (Default Value: 3)
- powerman_path
- Path to powerman binary (Default Value: /usr/bin/powerman)
- shell_timeout
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- retry_on
- Count of attempts to retry power on (Default Value: 1)