fence_pve - Fencing agent for the Proxmox Virtual Environment
The fence_pve agent can be used to fence virtual machines acting
as nodes in a virtualized cluster.
fence_pve accepts options on the command line as well as from
stdin. Fenced sends parameters through stdin when it execs the agent.
fence_pve can be run by itself with command line options. This is useful for
testing and for turning outlets on or off from scripts.
Vendor URL: http://www.proxmox.com/
- -o,
--action=[action]
- Fencing action (Default Value: reboot)
- -4, --inet4-only
- Forces agent to use IPv4 addresses only
- -6, --inet6-only
- Forces agent to use IPv6 addresses only
- -a, --ip=[ip]
- IP Address or Hostname of a node within the Proxmox cluster. This
parameter is always required.
- -u,
--ipport=[port]
- TCP/UDP port to use for connection with device (Default Value: 8006)
- -p,
--password=[password]
- Login password or passphrase
- -S,
--password-script=[script]
- Script to run to retrieve password
- -n, --plug=[id]
- Id of the virtual machine. This parameter is always required.
- -l,
--username=[name]
- Login name (Default Value: root@pam)
- -N, --nodename
- Node on which machine is located. (Optional, will be automatically
determined)
- --vmtype
- Virtual machine type lxc or qemu. (Default: qemu) (Default Value: qemu)
- -q, --quiet
- Disable logging to stderr. Does not affect --verbose or --debug-file or
logging to syslog.
- -v, --verbose
- Verbose mode
- -D,
--debug-file=[debugfile]
- Write debug information to given file
- -V, --version
- Display version information and exit
- -h, --help
- Display help and exit
- -C,
--separator=[char]
- Separator for CSV created by 'list' operation (Default Value: ,)
- --delay=[seconds]
- Wait X seconds before fencing is started (Default Value: 0)
- --login-timeout=[seconds]
- Wait X seconds for cmd prompt after login (Default Value: 5)
- --power-timeout=[seconds]
- Test X seconds for status change after ON/OFF (Default Value: 20)
- --power-wait=[seconds]
- Wait X seconds after issuing ON/OFF (Default Value: 0)
- --shell-timeout=[seconds]
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- --retry-on=[attempts]
- Count of attempts to retry power on (Default Value: 1)
- on
- Power on machine.
- off
- Power off machine.
- reboot
- Reboot machine.
- status
- This returns the status of the plug/virtual machine.
- list
- List available plugs with aliases/virtual machines if there is support for
more then one device. Returns N/A otherwise.
- list-status
- List available plugs with aliases/virtual machines and their power state
if it can be obtained without additional commands.
- monitor
- Check the health of fence device
- metadata
- Display the XML metadata describing this resource.
- manpage
-
The operational behavior of this is not known.
- validate-all
- Validate if all required parameters are entered.
- action
- Fencing action (Default Value: reboot)
- inet4_only
- Forces agent to use IPv4 addresses only
- inet6_only
- Forces agent to use IPv6 addresses only
- ip
- IP Address or Hostname of a node within the Proxmox cluster. This
parameter is always required. Obsoletes: ipaddr
- ipport
- TCP/UDP port to use for connection with device (Default Value: 8006)
- password
- Login password or passphrase Obsoletes: passwd
- password_script
- Script to run to retrieve password Obsoletes: passwd_script
- plug
- Id of the virtual machine. This parameter is always required. Obsoletes:
port
- username
- Login name (Default Value: root@pam) Obsoletes: login
- nodename
- Node on which machine is located. (Optional, will be automatically
determined) Obsoletes: node_name
- vmtype
- Virtual machine type lxc or qemu. (Default: qemu) (Default Value: qemu)
- quiet
- Disable logging to stderr. Does not affect --verbose or --debug-file or
logging to syslog.
- verbose
- Verbose mode
- debug_file
- Write debug information to given file Obsoletes: debug
- version
- Display version information and exit
- help
- Display help and exit
- separator
- Separator for CSV created by 'list' operation (Default Value: ,)
- delay
- Wait X seconds before fencing is started (Default Value: 0)
- login_timeout
- Wait X seconds for cmd prompt after login (Default Value: 5)
- power_timeout
- Test X seconds for status change after ON/OFF (Default Value: 20)
- power_wait
- Wait X seconds after issuing ON/OFF (Default Value: 0)
- shell_timeout
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- retry_on
- Count of attempts to retry power on (Default Value: 1)