NAME

trm — Tekram TRM-S1040 ASIC based PCI SCSI host adapter driver

SYNOPSIS

To compile this driver into the kernel, place the following lines in your kernel configuration file:

Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

trm_load="YES"

DESCRIPTION

The trm driver supports PCI SCSI host adapters based on the Tekram TRM-S1040 SCSI ASIC.

HARDWARE

SCSI controllers supported by the trm driver include:

• Tekram DC-315 PCI Ultra SCSI adapter without BIOS and internal SCSI connector
• Tekram DC-315U PCI Ultra SCSI adapter without BIOS
• Tekram DC-395F PCI Ultra-Wide SCSI adapter with flash BIOS and 68-pin external SCSI connector
• Tekram DC-395U PCI Ultra SCSI adapter with flash BIOS
• Tekram DC-395UW PCI Ultra-Wide SCSI adapter with flash BIOS
• Tekram DC-395U2W PCI Ultra2-Wide SCSI adapter with flash BIOS

For the Tekram DC-310/U and DC-390F/U/UW/U2B/U2W/U3W PCI SCSI host adapters, use the sym(4) driver.

SEE ALSO

cd(4), ch(4), da(4), intro(4), sa(4), scsi(4), sym(4)

http://www.tekram.com/

AUTHORS

The trm driver was originally written for FreeBSD 3.0/i386 by Erich Chen of Tekram Technology, and ported to FreeBSD 5.0 by Olivier Houchard <cognet@FreeBSD.org>.