NAME

umodem — USB Communication Device Class serial (CDC ACM) driver

SYNOPSIS

To compile this driver into the kernel, place the following lines in your kernel configuration file:

Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

umodem_load="YES"

DESCRIPTION

The umodem driver provides support for USB modems and serial devices that implement the Communication Device Class Abstract Control Model (CDC ACM). It also provides device-side CDC ACM support. Supported modems are basically standard serial line modems, but they are accessed via USB instead. They support a regular AT command set. The commands can either be multiplexed with the data stream or handled through separate pipes. In the latter case the AT commands have to be given on a device separate from the data device.

The device is accessed through the ucom(4) driver which makes it behave like a tty(4).

HARDWARE

Devices supported by the umodem driver include:

• 3Com 5605
• Curitel PC5740 Wireless Modem
• Kyocera AH-K3001V Mobile Phone(WILLCOM)
• Kyocera WX320K Mobile Phone(WILLCOM)
• Metricom Ricochet GS USB wireless modem
• Sierra MC5720 Wireless Modem
• Yamaha Broadband Wireless Router RTW65b
• ELSA MicroLink 56k USB modem
• Sony Ericsson W810i phone
• Sonim XP5300 Force

FILES

/dev/ttyU*

for callin ports

/dev/ttyU*.init

 

/dev/ttyU*.lock

corresponding callin initial-state and lock-state devices

/dev/cuaU*

for callout ports

/dev/cuaU*.init

 

/dev/cuaU*.lock

corresponding callout initial-state and lock-state devices

SEE ALSO

tty(4), ucom(4), usb(4)

HISTORY

The umodem driver appeared in NetBSD 1.5. This manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002.

BUGS

Only modems with multiplexed commands and data are supported at the moment.